Page 2 - SPECIFICATIONS; Applicable battery cartridge and charger; Symbols
2 ENGLISH SPECIFICATIONS Model: UB100D UB101D Capacities Air volume *1 0 - 2.6 m 3 /min Air speed (average) 0 - 62 m/s *2 0 - 45 m/s *3 Air speed (max.) 0 - 75 m/s *2 0 - 56 m/s *3 Overall length 508 mm *4 852 mm *5 Rated voltage D.C. 10.8 V - 12 V max Net weight With nozzle 1.4 - 1.9 kg - With gard...
Page 3 - Vibration; SAFETY WARNINGS; General power tool safety warnings; Save all warnings and instruc-
3 ENGLISH NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and may be used for comparing one tool with another. NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure. WARNING: Wear ear protection. WAR...
Page 5 - Cordless Blower Safety Instructions
5 ENGLISH Service 1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 2. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or a...
Page 6 - SAVE THESE INSTRUCTIONS.; Important safety instructions for
6 ENGLISH 17. Prevent unintentional starting. Ensure the switch is in the off-position before inserting battery cartridge, picking up or carrying the machine. Carrying the machine with your fin - ger on the switch or energizing the machine that has the switch on invites accidents. 18. Never blow or ...
Page 7 - Tips for maintaining maximum; ASSEMBLY; Assembly for blowing
7 ENGLISH A battery short can cause a large current flow, overheating, possible burns and even a breakdown. 6. Do not store and use the tool and battery car- tridge in locations where the temperature may reach or exceed 50 °C (122 °F). 7. Do not incinerate the battery cartridge even if it is severel...
Page 8 - Assembly for vacuuming
8 ENGLISH Installing or removing the garden nozzle Optional accessory for UB100D Align the protrusions on the garden nozzle with the grooves on the main unit, then insert the garden nozzle into the main unit, and then turn it to lock it into place. 1 ► 1. Garden nozzle To remove the garden nozzle, p...
Page 9 - Installing or removing the dust bag; FUNCTIONAL; Installing or removing battery
9 ENGLISH Installing or removing the dust bag Optional accessory for UB100D / UB101D Align the protrusions on the joint of dust bag with the grooves on the main unit, then insert the joint into the main unit, and then turn it to lock it into place. 1 2 ► 1. Joint 2. Dust bag To remove the dust bag, ...
Page 10 - Battery protection system; Indicating the remaining battery; Switch action
10 ENGLISH Battery protection system The machine is equipped with a battery protection system. This system automatically cuts off power to the motor to extend battery life. The machine will automatically stop during operation if the machine and/or battery are placed under one of the following condit...
Page 11 - OPERATION; Blower operation; Vacuuming operation
11 ENGLISH Number Speed 3 High 2 Medium 1 Low NOTICE: When turning the dial, be sure to com- pletely release the switch trigger. Otherwise, the machine may be damaged. OPERATION CAUTION: Do not place the machine on the ground while it is switched on. Sand or dust may enter from suction inlet and cau...
Page 12 - MAINTENANCE; Cleaning the machine
12 ENGLISH Hold the machine with both hands. While operating the machine, adjust the switch trigger so that the suction force is appropriate for the work location and conditions. Empty the dust bag before it becomes too full by remov- ing the dust bag from the machine, and then removing the fastener...
Page 13 - TROUBLESHOOTING; OPTIONAL
13 ENGLISH TROUBLESHOOTING Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the man - ual, do not attempt to dismantle the machine. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs. State of ...
