Makita LD050P 2 en Instrument Set-up Introduction The safety instructions and the user manual should be read through carefully before the product is used for the first time. The person responsible for the product must ensure that all users understand these directions and adhere to them. The symbols ...
Page 4 - Operations; Clear
Makita LD050P 4 en Operations Switching ON/OFF Clear Message Codes 2 sec Device is turned OFF. 1x Undo last action. If the info icon appears with a number, observe the instruc- tions in section "Message Codes". Example: Adjusting measuring reference Distance is measured from the front of the...
Page 5 - Measuring Functions; Measuring single distance
Makita LD050P 5 en Measuring Functions Measuring single distance 1 Aim active laser at target. 2 8.532 m 3 i Target surfaces: Measuring errors can occur when meas- uring to colourless liquids, glass, styrofoam or semi-per- meable surfaces or when aiming at high gloss surfac- es. Against dark surface...
Page 6 - Area
Makita LD050P Measuring Functions 6 en Area 1 1x 2 Aim laser at first target point. 3 4 Aim laser at sec- ond target point. 24.352 m 2 5 i The result is shown in the main line and the measured value above. Volume 1 2x 2 Aim laser at first target point. 3 4 Aim laser at sec- ond target point. 5 6 Aim...
Page 8 - last results are
Makita LD050P Measuring Functions 8 en Memory (5 last results) 8.294 m 5 5 last results are displayed. 1 5x 8.294 m 5 Navigates trough 5 last results. 2
Page 9 - Technical Data
Makita LD050P 9 en Technical Data * favourable conditions are: white and diffuse reflecting target (white painted wall), low background illumination and moderate temperatures.** unfavourable conditions are: targets with lower or higher reflectivity or high background illumination or temperatures at ...
Page 10 - Message Codes; Error; Care; Areas of responsibility; Responsibilities of the manufacturer
Makita LD050P 10 en Message Codes If the message Error does not disappear after switching on the device repeatedly, contact the dealer. If the message InFo appears with a number, press the Clear button and observe the following instructions: Care • Clean the device with a damp, soft cloth. • Never i...
Page 11 - Safety Instructions
Makita LD050P Safety Instructions 11 en Permitted use • Measuring distances • Tilt measurement Prohibited use • Using the product without instruction • Using outside the stated limits • Deactivation of safety systems and removal of explanatory and hazard labels • Opening of the equipment by using to...
Page 12 - Laser classification; Laser Class 2 products:
Makita LD050P Safety Instructions 12 en FCC statement (applicable in U.S.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in...
