Magnavox NB500MG1F - Manuals

Page 2 - INTRODUCTION; Safety Instructions; FCC WARNING; CAUTION; The important note is located on the rear or bottom of the cabinet.; IMPORTANT SAFETY INSTRUCTIONS

2 EN INTRODUCTION Safety Instructions FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment maycause harmful interference unless the modifications are expressly approved in the manual. The user could lose theauthority to operate this equipm...

Page 3 - LASER SAFETY; IMPORTANT COPYRIGHT INFORMATION; To Avoid the Hazards of Electrical Shock and Fire; INTRO

3 EN INTRODUCTION CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like. LASER SAFETY This apparatus employs a l...

Page 4 - Contents

4 EN INTRODUCTION INTRODUCTION Safety Instructions ........................................................................2Supplied Accessories ...................................................................5Trademark Information ...............................................................5F...

Page 5 - is a trademark of DVD Format/Logo Licensing; Supplied Accessories; RCA audio / video cables; Trademark Information

5 EN INTRODUCTION HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. ...

Page 6 - Features; Symbol; Description refers to DVD-video

6 EN INTRODUCTION Full high-definition video playback Watch movies in the highest picture quality available for your HDTV. This unit offers full high-definition video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased sharpness delivers a more ...

Page 7 - Infrared sensor window; Front Panel; Rear Panel; Note

7 EN INTRODUCTION (*) The unit can also be turned on by pressing these buttons. 1. Disc tray • Place a disc when opening the disc tray. 2. A OPEN/CLOSE button* • Press to open or close the disc tray. 3. DISC IN indicator • This indicator lights up in blue when a disc is in this unit. 4. Infrared sen...

Page 8 - button; Remote Control

8 EN INTRODUCTION (*) The unit can also be turned on by pressing these buttons. 1. STANDBY-ON Q button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.) 2. RED / GREEN / BLUE / YELLOW button • Press to select...

Page 9 - Either side of the center:; Installing the Batteries in the Remote Control; Using a Remote Control

9 EN INTRODUCTION Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control. Keep in mind the following when using the remote control:• Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit. • ...

Page 10 - CONNECTIONS; Connection to the TV; Best; HDMI IN; Better; Basic

10 EN CONNECTIONS (Supports up to 1080i / 1080p, 1080p24 resolution.) (Supports up to 1080i resolution.) (Supports only 480i resolution.) • Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be distorted due to the copy right protection system....

Page 11 - HDMI Video / Audio Connection; The indicators blink under the following conditions.; The indicators blink as follows for 30 seconds.; CONNE

11 EN CONNECTIONS HDMI Video / Audio Connection Component Video + Standard Audio Connection Standard Video + Standard Audio Connection 2 Connect the cables by following the descriptions below. Note • Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack...

Page 12 - To set up “HDMI Audio Out”, refer to pages 35 and 34.; Connection to an Audio System; -Channel Analog Audio Connection; RCA audio cable; stereo system; To set up “Digital Out”, refer to page 36.; HDMI Audio Connection; audio; HDMI cable; AV receiver / amplifier with an HDMI input jack

12 EN CONNECTIONS • When you change the connections, all devices should be turned off.• Refer to the manual accompanying external devices for more information. To set up “HDMI Audio Out”, refer to pages 35 and 34. Connection to an Audio System 2-Channel Analog Audio Connection Digital Audio Connecti...

Page 13 - Finding the Video Channel on Your TV

13 EN CONNECTIONS After you have completed all the connections, you must find the correct video channel (external input channel) on your TV. Finding the Video Channel on Your TV 1 After you have made all the necessary connections, press [STANDBY-ON Q ] to turn on the unit. 2 Turn on your TV. 3 Press...

Page 14 - PLAYBACK; Information on Playback; Playable Discs and Files; Note for SD Memory Cards; Unplayable Discs and Files

14 EN PLAYBACK Before you start playing back a disc, read the following information. This unit is compatible to play back the following discs / files.To play back a disc / file, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs th...

Page 15 - Color Systems; PLAY

15 EN PLAYBACK BD-video and DVD-video are recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada).This unit employs NTSC color system, so the disc you play back must be recorded in the NTSC system. You c...

Page 16 - Media icon and file name

16 EN PLAYBACK S Chapter information <Title / Chapter information for BD> <Chapter information for DVD> S Title information S Track / File information S Disc information S File name information : JPEG file S Audio format information Current title numberCurrent chapter number / Total numb...

Page 17 - How to Insert a Disc; It may take a while to load the disc.; ] to go back and forward; To remove the SD Memory Card:

17 EN PLAYBACK To eject the disc: Press [OPEN/CLOSE A ] to open the disc tray. Remove the disc. Press [OPEN/CLOSE A ] to close the disc tray. You can play back the JPEG files in an SD Memory Card.With the SD Memory Card, you can also enjoy the special additional contents for BD-ROM Profile 1 ver.1.1...

Page 18 - “Media Select” is available only when an SD Memory Card is inserted.; Selecting the Media Mode; • Selected media mode is now activated.

18 EN PLAYBACK For the playback media to be read by this unit, the correct media mode should be selected. You can switch the media mode by following the steps below. “Media Select” is available only when an SD Memory Card is inserted. Even if you turn the unit to the standby mode in “SD Card” mode, ...

Page 19 - Playback may start automatically.; To return to the normal playback:

19 EN PLAYBACK Playing Back (BD / DVD) 1 Press [STANDBY-ON Q ]. 2 Turn on the TV and select the appropriate input on the TV to which the unit is connected. 3 Insert a disc (refer to page 17 on how to insert a disc). 4 Playback may start automatically. If not, press [ B (play)] . Some discs may show ...

Page 20 - Before you begin

20 EN PLAYBACK Many of BD-video and DVD-video discs contain title menu (BD-video / DVD-video), disc menu (DVD-video) or pop-up menu (BD-video) which guides you through the available functions in the disc. The contents of the menus may differ depending on the discs. Title menu (BD-video / DVD-video) ...

Page 21 - Playback status; Tips for JPEG / Kodak Picture CD Playback

21 EN PLAYBACK It is recommended that files to be played back in this unit are recorded under the following specifications:<JPEG> This unit can also run JPEG files stored on Kodak Picture CD. You can enjoy picture images on the TV set by playing back the Kodak Picture CD. This unit conforms to...

Page 22 - repeatedly for fast forward.; Every time you press [; Fast Forward / Fast Reverse; Slow Forward Playback; Step by Step Playback; Repeat Playback

22 EN PLAYBACK 1 During playback, press [ D (forward)] repeatedly for fast forward. During playback, press [ E (reverse)] repeatedly for fast reverse.Every time you press [ D (forward)] or [ E (reverse)], the playback speed will change. 2 Press [ B (play)] to return to normal playback. 1 During play...

Page 23 - To exit from the program playback mode:; Program Playback; Programmed list : Track / File list in the

23 EN PLAYBACK You can play back the disc/card in your desired order. 1 In stop mode, press [MODE]. 2 Use [ K / L ] to select a track / file, then press [OK]. • For JPEG files, use [ K / L ] to select a folder, then press [OK] first, and then use [ K / L ] to select a file, then press [OK] . • Press...

Page 24 - To exit from the random playback mode:; Black level; Random Playback; Track / File list : Track / File list in the original order; Rapid Playback; “Off”; Adjusting the Picture; “On”

24 EN PLAYBACK This function shuffles the playback order of tracks / files. 1 In stop mode, press [MODE] twice. 2 Press [ B (play)] to start random playback. To exit from the random playback mode: • Press [MODE] in stop mode. This function plays back approximately at 1.3 times the normal playback wh...

Page 25 - ] to select the secondary video you; Virtual Surround; Camera Angle

25 EN PLAYBACK S Noise reduction (DVD-video only) Reduces the noise of the playback picture. 3 Press [RETURN] to exit. You can enjoy stereophonic virtual space through your existing 2 channel stereo system. 1 During playback, press [MODE]. 2 Use [ K / L ] to select your desired setting. 3 Press [RET...

Page 26 - Title Search; ) In stop mode, enter the title number you want to; Chapter Search; ) During playback of a title, enter the chapter number; Search

26 EN PLAYBACK 1 During playback, press [ G (skip)] to move to the next track / title / chapter / file. Press it repeatedly to skip to subsequent tracks. Press [ H (skip)] once to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks. • For JPEG files, press...

Page 27 - or; Switching Subtitles; Switching Audio Soundtrack

27 EN PLAYBACK You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Some BD and DVD may have subtitles in 1 or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the steps b...

Page 28 - Setting the BD Audio Mode

28 EN PLAYBACK There are 2 options for the “BD Audio Mode” setting; either by setting the output to the secondary and interactive audio accompanied by the primary audio or by setting only the primary audio. Depending on the setting of the mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, o...

Page 29 - FUNCTION SETUP; Quick” menu contains setting items extracted from; Using the Setup Menu; Quick; ] to select your desired; ” does not appear on the right side; • Use; FUNCTI

29 EN FUNCTION SETUP In the setup menu you can change the setting for audio, video, language, etc. You cannot change the setting during playback.Setting items displayed in gray indicates they are not available under the conditions at the time. “ Quick” menu contains setting items extracted from “ Cu...

Page 30 - Custom” menu contains all the setting items.; Custom; • For “Parental” menu, follow the procedure

30 EN FUNCTION SETUP “ Custom” menu contains all the setting items. Custom 1 In stop mode, press [SETUP]. 2 Use [ K / L ] to select , then press [OK]. 3 Use [ K / L ] to select your desired setting category, then press [OK]. : Language : Video : Audio : Parental : Others • For “Parental” menu, follo...

Page 31 - Language; • To select the setting items and options, refer to “; Setting items; Sets the language for audio.; Subtitle; Sets the language for subtitle.; Disc Menu

31 EN FUNCTION SETUP S Language • To select the setting items and options, refer to “ Custom” on page 30. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with . *)Settings with (*) are the default.*1) “Auto” activates the Get & Set Menu Language function. ...

Page 32 - Video; Sets the HDMI video resolution.; HDMI Deep Color

32 EN FUNCTION SETUP S Video • To select the setting items and options, refer to “ Custom” on page 30. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with . Setting items Options TV Aspect Sets the picture size according to aspect ratio of the connected TV. 1...

Page 33 - Note for “HDMI Video Resolution” and “Component Output”; press and hold

33 EN FUNCTION SETUP *)Settings with (*) are the default.*1) An individual picture on the TV screen is called “Frame”, which consists of two separate images called “Field”. Some pictures may be blurred at the auto setting in “Still Mode” setting due to their data characteristics. Setting items Optio...

Page 34 - On

34 EN FUNCTION SETUP S Audio • To select the setting items and options, refer to “ Custom” on page 30. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with . *)Settings with (*) are the default.• Under following circumstances, “HDMI Multi(Normal)” and “HDMI Mu...

Page 35 - HDMI Audio Out Setting; maybe limited by the device that is connected.

35 EN FUNCTION SETUP HDMI Audio Out Setting When using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the specifications of the device to be connected. Refer to page 34. Normally, set it to “HDMI Multi(Normal)” so that the unit automatically picks and outputs the best au...

Page 36 - Digital Out setting; • This setting is not effective when the HDMI audio signal is output.; Audio signals output from DIGITAL OUT (COAXIAL) jack

36 EN FUNCTION SETUP Digital Out setting When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be mute and the audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting. • This setting is not effective when the HDMI audio signal is output. Audi...

Page 37 - ] to select your desired menu item then; Speaker Size

37 EN FUNCTION SETUP Speaker setting (Available when you have HDMI cable connected to HDMI OUT jack) This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround. To make the most of its feature, set up your speakers appropriately by referring to the followin...

Page 38 - Menu

38 EN FUNCTION SETUP *)Settings with (*) are the default.• For “Speaker Size” setting, the settings of each speaker size may be adjusted automatically corresponding to each setting. (e.g. If “Front” is set to “Small”, you cannot set “Center”, “Surround”, and “Surround Back” to “Large”.) • For “Delay...

Page 40 - Others; Selects the media to playback.; Software Update

40 EN FUNCTION SETUP S Others • To select the setting items and options, refer to “ Custom” on page 30. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with . Others Angle Icon Auto Power Off HDMI CEC Media Select On On Off Disc Software Update Setting items O...

Page 41 - HDMI CEC; One Touch Play; when the; Standby; When you press and hold; System Information; Current Version; You can confirm the current software version.

41 EN FUNCTION SETUP S HDMI CEC HDMI CEC allows integrated system control over HDMI and is part of the HDMI standard.This function may not work properly depending on a device to be connected.When “HDMI CEC” setting is set to “On”, functions listed below will be available. One Touch Play When this un...

Page 42 - • Confirmation message will appear.; Insert the firmware update disc created at step 1.

42 EN FUNCTION SETUP S Software Update This unit lets you update the firmware yourself using a firmware update disc.To update the firmware, you must first download the latest firmware to a disc, then execute “Software Update”. 1 Prepare a firmware update disc: Please access www.magnavox.com, and dow...

Page 43 - • Loading of the firmware will start.; The indicators blinks for this procedure.

43 EN FUNCTION SETUP 7 Use [ s / B ] to select “Yes”, then press [OK]. • Loading of the firmware will start. 8 After the firmware update finishes, this unit will restart, and eject the disc automatically. • Software updating is now complete. Please take out the firmware update disc. Current Version ...

Page 45 - OTHERS; Troubleshooting; Problem

45 EN OTHERS If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist. Troubleshooting Problem Solution No power - Check if the AC cord is properly connected.- Unplug the AC cord once, and wait for 5-10 seconds and then plug...

Page 46 - Glossary

46 EN OTHERS Analog Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3...

Page 47 - Language Code List

47 EN OTHERS Language Code List Language Code A-B Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 Bashkir 4847 Basque 5167 Bengali;Bangla 4860 Bhutani 5072 Bihari 4854 Bislama 4855 Breton 4864 Bulgarian [BUL] 485...

Page 48 - General; Video output

48 EN OTHERS General Signal system NTSC color Power requirements 120 V AC, 60 Hz Power consumption 20 W (standby: 0.5 W) Dimensions (width x height x depth) 14-3/16 x 2 x 8-16/8 inches (360 x 50 x 215mm) Weight 4.2 lbs. (1.9 kg) Operating temperature 41°F (5°C) to 104°F (40°C) Operating humidity Les...

Page 49 - Maintenance

49 EN OTHERS Servicing • Please refer to relevant topics on “Troubleshooting” on page 45 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please contact 1-...

Page 50 - MEMO

50 EN MEMO E5P00UD_01UD_EN.book Page 50 Friday, September 11, 2009 10:03 AM

Page 52 - LIMITED WARRANTY; original retail purchase.; LIMITS AND EXCLUSIONS:; Printed in China

E5P00UD_E5P01UD1VMN27793 ★ LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of origi...