Magnavox MBP1100 - Manuals

5 EN INTRODUCTION HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. ...

6 EN INTRODUCTION Full high-definition video playback Watch movies in the highest picture quality available for your HDTV. This unit offers full high-definition video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased sharpness delivers a more ...

7 EN INTRODUCTION (*) The unit can also be turned on by pressing these buttons. 1. Disc tray • Place a disc when opening the disc tray. 2. A OPEN/CLOSE button* • Press to open or close the disc tray. 3. DISC IN indicator • This indicator lights up in blue when a disc is in this unit. 4. Infrared sen...

8 EN INTRODUCTION (*) The unit can also be turned on by pressing these buttons. 1. STANDBY-ON Q button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.) 2. RED / GREEN / BLUE / YELLOW button • Press to select...

9 EN INTRODUCTION Install AAA (1.5V) battery × 2 matching the polarity indicated inside battery compartment of the remote control. Keep in mind the following when using the remote control:• Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit. •...

10 EN CONNECTIONS (Supports up to 1080i / 1080p, 1080p24 resolution.) (Supports up to 1080i resolution.) (Supports only 480i resolution.) • Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be distorted due to the copy right protection system....

11 EN CONNECTIONS HDMI Video / Audio Connection Component Video + Standard Audio Connection Standard Video + Standard Audio Connection 2 Connect the cables by following the descriptions below. Note • Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack...

12 EN CONNECTIONS • When you change the connections, all devices should be turned off.• Refer to the manual accompanying external devices for more information. To set up “HDMI Audio Out”, refer to pages 35 and 34. Connection to an Audio System 2-Channel Analog Audio Connection Digital Audio Connecti...

13 EN CONNECTIONS After you have completed all the connections, you must find the correct video channel (external input channel) on your TV. Finding the Video Channel on Your TV 1 After you have made all the necessary connections, press [STANDBY-ON Q ] to turn on the unit. 2 Turn on your TV. 3 Press...

14 EN PLAYBACK Before you start playing back a disc, read the following information. This unit is compatible to play back the following discs / files.To play back a disc / file, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs th...

15 EN PLAYBACK BD-video and DVD-video are recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada).This unit employs NTSC color system, so the disc you play back must be recorded in the NTSC system. You c...

16 EN PLAYBACK S Chapter information <Title / Chapter information for BD> <Chapter information for DVD> S Title information S Track / File information S Disc information S File name information : JPEG file S Audio format information Current title numberCurrent chapter number / Total numb...

17 EN PLAYBACK To eject the disc: Press [OPEN/CLOSE A ] to open the disc tray. Remove the disc. Press [OPEN/CLOSE A ] to close the disc tray. You can play back the JPEG files in an SD Memory Card.With the SD Memory Card, you can also enjoy the special additional contents for BD-ROM Profile 1 ver.1.1...

18 EN PLAYBACK For the playback media to be read by this unit, the correct media mode should be selected. You can switch the media mode by following the steps below. “Media Select” is available only when an SD Memory Card is inserted. Even if you turn the unit to the standby mode in “SD Card” mode, ...

19 EN PLAYBACK Playing Back (BD / DVD) 1 Press [STANDBY-ON Q ]. 2 Turn on the TV and select the appropriate input on the TV to which the unit is connected. 3 Insert a disc (refer to page 17 on how to insert a disc). 4 Playback may start automatically. If not, press [ B (play)] . Some discs may show ...

20 EN PLAYBACK Many of BD-video and DVD-video discs contain title menu (BD-video / DVD-video), disc menu (DVD-video) or pop-up menu (BD-video) which guides you through the available functions in the disc. The contents of the menus may differ depending on the discs. Title menu (BD-video / DVD-video) ...

21 EN PLAYBACK It is recommended that files to be played back in this unit are recorded under the following specifications:<JPEG> This unit can also run JPEG files stored on Kodak Picture CD. You can enjoy picture images on the TV set by playing back the Kodak Picture CD. This unit conforms to...

22 EN PLAYBACK 1 During playback, press [ D (forward)] repeatedly for fast forward. During playback, press [ E (reverse)] repeatedly for fast reverse.Every time you press [ D (forward)] or [ E (reverse)], the playback speed will change. 2 Press [ B (play)] to return to normal playback. 1 During play...

23 EN PLAYBACK You can play back the disc/card in your desired order. 1 In stop mode, press [MODE]. 2 Use [ K / L ] to select a track / file, then press [OK]. • For JPEG files, use [ K / L ] to select a folder, then press [OK] first, and then use [ K / L ] to select a file, then press [OK] . • Press...

24 EN PLAYBACK This function shuffles the playback order of tracks / files. 1 In stop mode, press [MODE] twice. 2 Press [ B (play)] to start random playback. To exit from the random playback mode: • Press [MODE] in stop mode. This function plays back approximately at 1.3 times the normal playback wh...

25 EN PLAYBACK S Noise reduction (DVD-video only) Reduces the noise of the playback picture. 3 Press [RETURN] to exit. You can enjoy stereophonic virtual space through your existing 2 channel stereo system. 1 During playback, press [MODE]. 2 Use [ K / L ] to select your desired setting. 3 Press [RET...

26 EN PLAYBACK 1 During playback, press [ G (skip)] to move to the next track / title / chapter / file. Press it repeatedly to skip to subsequent tracks. Press [ H (skip)] once to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks. • For JPEG files, press...

27 EN PLAYBACK You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Some BD and DVD may have subtitles in 1 or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the steps b...

28 EN PLAYBACK There are 2 options for the “BD Audio Mode” setting; either by setting the output to the secondary and interactive audio accompanied by the primary audio or by setting only the primary audio. Depending on the setting of the mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, o...

29 EN FUNCTION SETUP In the setup menu you can change the setting for audio, video, language, etc. You cannot change the setting during playback.Setting items displayed in gray indicates they are not available under the conditions at the time. “ Quick” menu contains setting items extracted from “ Cu...

30 EN FUNCTION SETUP “ Custom” menu contains all the setting items. Custom 1 In stop mode, press [SETUP]. 2 Use [ K / L ] to select , then press [OK]. 3 Use [ K / L ] to select your desired setting category, then press [OK]. : Language : Video : Audio : Parental : Others • For “Parental” menu, follo...

31 EN FUNCTION SETUP S Language • To select the setting items and options, refer to “ Custom” on page 30. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with . *)Settings with (*) are the default.*1) “Auto” activates the Get & Set Menu Language function. ...

32 EN FUNCTION SETUP S Video • To select the setting items and options, refer to “ Custom” on page 30. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with . Setting items Options TV Aspect Sets the picture size according to aspect ratio of the connected TV. 1...

33 EN FUNCTION SETUP *)Settings with (*) are the default.*1) An individual picture on the TV screen is called “Frame”, which consists of two separate images called “Field”. Some pictures may be blurred at the auto setting in “Still Mode” setting due to their data characteristics. Setting items Optio...

34 EN FUNCTION SETUP S Audio • To select the setting items and options, refer to “ Custom” on page 30. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with . *)Settings with (*) are the default.• Under following circumstances, “HDMI Multi(Normal)” and “HDMI Mu...

35 EN FUNCTION SETUP HDMI Audio Out Setting When using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the specifications of the device to be connected. Refer to page 34. Normally, set it to “HDMI Multi(Normal)” so that the unit automatically picks and outputs the best au...

36 EN FUNCTION SETUP Digital Out setting When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be mute and the audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting. • This setting is not effective when the HDMI audio signal is output. Audi...

37 EN FUNCTION SETUP Speaker setting (Available when you have HDMI cable connected to HDMI OUT jack) This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround. To make the most of its feature, set up your speakers appropriately by referring to the followin...

38 EN FUNCTION SETUP *)Settings with (*) are the default.• For “Speaker Size” setting, the settings of each speaker size may be adjusted automatically corresponding to each setting. (e.g. If “Front” is set to “Small”, you cannot set “Center”, “Surround”, and “Surround Back” to “Large”.) • For “Delay...

40 EN FUNCTION SETUP S Others • To select the setting items and options, refer to “ Custom” on page 30. • “ Quick” menu consists of the setting menus frequently used, and they are accompanied with . Others Angle Icon Auto Power Off HDMI CEC Media Select On On Off Disc Software Update Setting items O...

41 EN FUNCTION SETUP S HDMI CEC HDMI CEC allows integrated system control over HDMI and is part of the HDMI standard.This function may not work properly depending on a device to be connected.When “HDMI CEC” setting is set to “On”, functions listed below will be available. One Touch Play When this un...

42 EN FUNCTION SETUP S Software Update This unit lets you update the firmware yourself using a firmware update disc.To update the firmware, you must first download the latest firmware to a disc, then execute “Software Update”. 1 Prepare a firmware update disc: Please access www.magnavox.com, and dow...

43 EN FUNCTION SETUP 7 Use [ s / B ] to select “Yes”, then press [OK]. • Loading of the firmware will start. 8 After the firmware update finishes, this unit will restart, and eject the disc automatically. • Software updating is now complete. Please take out the firmware update disc. Current Version ...

45 EN OTHERS If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist. Troubleshooting Problem Solution No power - Check if the AC cord is properly connected.- Unplug the AC cord once, and wait for 5-10 seconds and then plug...

46 EN OTHERS Analog Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3...

47 EN OTHERS Language Code List Language Code A-B Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 Bashkir 4847 Basque 5167 Bengali;Bangla 4860 Bhutani 5072 Bihari 4854 Bislama 4855 Breton 4864 Bulgarian [BUL] 485...

48 EN OTHERS General Signal system NTSC color Power requirements 120 V AC, 60 Hz Power consumption 20 W (standby: 0.5 W) Dimensions (width x height x depth) 14-3/16 x 2 x 8-16/8 inches (360 x 50 x 215mm) Weight 4.2 lbs. (1.9 kg) Operating temperature 41°F (5°C) to 104°F (40°C) Operating humidity Les...

49 EN OTHERS Servicing • Please refer to relevant topics on “Troubleshooting” on page 45 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn the unit to the standby mode, unplug the power pl...

50 EN MEMO E5P04UD_EN.book Page 50 Tuesday, October 6, 2009 8:04 PM

E5P04UD_E5P05UD1VMN28573 ((((( LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanshipas follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the dateof ori...