Page 2 - For Customer Use; Know these; safety; symbols; ATTENTION; Hurry
Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of own-ing a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed withyour purchase at once. And take advantage of these important benefits. Return your Warranty Registration card tod...
Page 3 - Safety and General Information 3
Safety Precautions Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this equipment void the user’s authority to operate it. Laser Safety: This unit employs a laser...
Page 4 - Table of Contents
4 Table of Contents General Information Safety and General Information . . . . . . . . . . . . . . . .3Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . .4Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Playable Discs and Videotapes . . . . . . . . . . . . ...
Page 5 - Introduction 5; This manual describes the
Introduction 5 • Automatic Channel Setup• Automatic Head Cleaner• Automatic Tracking Adjustment• Closed Captions• Daylight-Savings Time• English, Spanish, or French Setup Menus• Forward/Reverse Searching; Still• High Quality (HQ) System• Index Search • One-Touch Recording• Real-Time Videotape Counte...
Page 6 - Playable Discs and Videotapes; Region Codes
6 Playable Discs and Videotapes Region Codes This TV/VCR/DVD has a Region One ( 1 ) DVD Player. DVDs must be labeled for ALL regions or for Region 1 in order to play on the unit. You cannot play DVDs that are labeled for other regions. Look for the symbols below on your DVDs. If these regionsymbols ...
Page 7 - Remote Control Battery Installation; Remove the battery compartment lid; on the; Replace the battery compartment lid.; Battery Safety; Details are on page 16.; Helpful Hint
Before Using the TV/VCR/DVD 7 1 2 1 2 3 Remote Control Battery Installation 1 Remove the battery compartment lid on the bottom of the remote control. Slide the lid down andoff. Follow the direction of the arrow on the lid. 2 Place two AA batteries inside the battery com-partment. Align the + and – e...
Page 9 - Jacks on front of; Indoor Antenna; More details are
Hooking Up the TV/VCR/DVD (cont’d) 9 R L AUDIO VIDEO HEADPHONE STANDBY-ON SEARCH NEXT PREV PLAY F.FWD REW PLAY STOP OPEN/CLOSE REC/OTR STOP/EJECT VOLUME D V D D V D TV/VCR SELECT V C R CHANNEL OUT IN VIDEO IN OUT 3CH4CH AUDIO ANT. OUT IN VIDEO IN OUT 3CH 4CH ANT. R L AUDIO VIDEO HEADPHONE AUDIO L R ...
Page 10 - Optional Connections; Helpful Hints; Analog Stereo Hookups; Digital Stereo Hookups
ANT. L AUDIO OUT R COAXIAL L AUDIO OUT R COAXIAL 1 0 Optional Connections • You cannot use a Mini-Disc or Digital Audio Tape deck to copy5. 1 channel Dolby Digital sur- round sound Discs. • Discs recorded in Dolby Digital should show this on the Disc orcase. If the Disc is not recordedin 5. 1 channe...
Page 11 - to turn on the; Press; to; to adjust the volume.
First-Time Setup, Watching TV 11 The TV/VCR/DVD can memorize available TV channels. If you are using a Cable Box or Satellite Receiver, you do notneed to set channels at the TV/VCR/DVD. Set theTV/VCR/DVD to the output channel of the Cable Box orSatellite Receiver (channel 03 or 04 or AUX). Then sele...
Page 12 - Playing a Videotape; • If the tape you want to play is; Follow these steps to simply play a videotape.; Press STOP
1 2 Playing a Videotape • If the tape you want to play is already in the TV/VCR/DVD, turnon the power. Press SELECT tochoose TV/VCR mode (the redVCR/TV light will be on), thenpress PLAY B . • When you play an S-VHS format tape, you cannot get the highresolution that would be avail-able on an S-VHS V...
Page 13 - Playing a Disc 13; on the front of the; See page six for details.; on
Playing a Disc 13 • If you turn off the unit in DVD mode, when you turn it on again, itwill be in TV/VCR mode. • An ‘’X” will appear on the screen when you try to access a featurethat is not available.This is not aproblem with the TV/VCR/DVD. • If a Disc is dirty or scratched, the picture may be dis...
Page 14 - Remote Control Buttons
1 4 Remote Control Buttons PLAY STOP ENTER RECORD DISC MENU RETURN TITLE SETUP A-B REPEAT SEARCH MODE CLEAR MODE ANGLE SUBTITLE AUDIO DISPLAY SPEED C.RESET STANDBY-ON PICTURE SELECT SLEEP CH. VOL. MUTE ZOOM 1 2 3 4 5 6 7 8 9 0 +10 +100 REPEAT PICTURE Button Press to access the picture controls. Deta...
Page 15 - Details are on
Remote Control Buttons (cont’d) 1 5 PLAY STOP ENTER RECORD DISC MENU RETURN TITLE SETUP A-B REPEAT SEARCH MODE CLEAR MODE ANGLE SUBTITLE AUDIO DISPLAY SPEED C.RESET STANDBY-ON PICTURE SELECT SLEEP CH. VOL. MUTE ZOOM 1 2 3 4 5 6 7 8 9 0 +10 +100 REPEAT ZOOM Button Press to enlarge the picture during ...
Page 16 - Front Panel; C A
1 6 Front Panel R L AUDIO VIDEO HEADPHONE STANDBY-ON SEARCH NEXT PREV PLAY F.FWD REW PLAY STOP OPEN/CLOSE REC/OTR STOP/EJECT VOLUME D V D D V D VCR/TV OUTPUT V C R CHANNEL R L AUDIO VIDEO HEADPHONE STANDBY-ON SEARCH NEXT PREV PLAY F.FWD REW PLAY STOP OPEN/CLOSE REC/OTR STOP/EJECT VOLUME D V D D V D ...
Page 17 - Rear Panel; Power Cord; Connect to a standard AC outlet (
Rear Panel 1 7 ANT. L AUDIO OUT R COAXIAL ANT. Jack(Antenna In) Connect an antenna or Cable TV signal here. This brings TV channels to the TV/VCR/DVD. If you do not connect an antenna or Cable TV signal to the TV/VCR/DVD (or connect to a Cable Box/Satellite Receiver through this jack), you will not ...
Page 18 - Menu Language, Resetting TV Channels; Menu Language; The selected language; Resetting TV Channels; buttons to scan memorized chan-
1 8 Menu Language, Resetting TV Channels Menu Language This affects the language of the TV/VCR/DVD’s setup menusand on-screen display terms. It does not alter the language ofTV programming, videotapes, Discs, or closed captioning. 1 Press SETUP once so the TV/VCR SETUPmenu appears. 2 Press ▲ or ▼ to...
Page 19 - Adding/Deleting Channels; The menu will disappear and a
• To confirm that a channel has been added or deleted, press theCH. ▲ / ▼ buttons to see if you can or cannot select the channel.Only memorized/added channelscan be selected with CH. ▲ / ▼ . Use the Number buttons toselect deleted channels. • If you connected an Antenna to the TV/VCR/DVD, channels 2...
Page 20 - 0 Setting the Clock; • You may have to reset the clock; Manual Clock Setting
20 Setting the Clock • You may have to reset the clock after a power failure. Helpful Hint Manual Clock Setting You must set the clock before you can do a timer recording.Set the clock manually. Afterward, use Auto Clock to moni-tor the time. Details are on pages 22-23. If you do not receive a PBS s...
Page 21 - Although seconds are not displayed,
• To adjust the clock later, follow steps 1 -3 on page 20. Then press s or B to select the item you want to change. Enter the cor-rect information by pressing ▲ or ▼ . Press SETUP when you are finished. Helpful Hint Setting the Clock (cont’d) 2 1 5 While the DAY space is flashing, press ▲ or ▼ until...
Page 22 - Auto Clock Setting; Set up the TV channels.
22 Setting the Clock (cont’d) Auto Clock Setting You can have the TV/VCR/DVD adjust the clock using yourPBS channel. Once you set the clock manually, theTV/VCR/DVD will monitor the correct time and date broad-cast by the PBS station. Before you begin ... ● Turn on the TV/VCR/DVD power. ● Connect the...
Page 23 - • During the Auto Clock Channel
Setting the Clock (cont’d) 23 4 If you already know your PBS channel number,skip ahead to step 8. If you do not know thechannel number of your PBS station, press ▼ to select AUTO CLOCK CH SEARCH. Thenpress ENTER. ● The TV/DVD/VCR will search for a channel thatcarries a time signal. Channels that car...
Page 24 - 4 Daylight-Savings Time
24 Daylight-Savings Time When Daylight-Savings Time (D.S.T.) is ON, the clock willmove forward one hour on the first Sunday in April andmove back one hour on the last Sunday in October. To turn Daylight-Savings Time ON or OFF, follow the stepsbelow. ● Before you begin, press SELECT to put theTV/VCR/...
Page 25 - Status Displays; Closed Caption details are on page 4; Status Displays, Picture Controls 25; Picture Controls; Magnetism from
Status Displays To see the Videotape Counter, Clock, or Channel numberon the screen in TV/VCR mode, press DISPLAY repeatedly. The following will occur when Closed Captions are OFF. 1 Press DISPLAY once to see the Videotapecounter. After five seconds, only the counter will remain on the screen. 2 Pre...
Page 26 - 6 Videotape Recording; Cassette type / Playback Time
26 Videotape Recording • You cannot record DVD contents onto a videotape using this unit. • Recording options are on pages 27-32. • If you pause a recording for five minutes, the unit will startRecording again automatically. • You can change the tape speed by pressing the SPEED button while arecordi...
Page 27 - One-Touch Recording 27; Insert a videotape with its erase prevention tab in place.
One-Touch Recording 27 A One-Touch Recording (OTR) is an immediate timedrecording from 30 minutes to eight hours long. Before you begin ... ● Turn on the TV/VCR/DVD. ● Press SELECT to put the unit in TV/VCR mode. The red VCR/TV light will appear on the front of the unit. ● Insert a videotape with it...
Page 28 - 8 Timer Recording; to set the
28 Timer Recording Follow the steps below to program the TV/VCR/DVD torecord TV programs while you’re away from home. The TV/VCR/DVD will record and turn itself off automatical-ly. You can set a maximum of eight timer recordings. Before you begin, make sure ... ● The clock is set. If the clock is no...
Page 30 - AM or PM will appear with the hour.
30 Timer Recording (cont’d) 6 While END is selected, press ▲ or ▼ to select the hour at which you want recording to stop. AM or PM will appear with the hour. Then, press B and press ▲ or ▼ to select the minute at which you want recording to end.Press B . 7 Press ▲ or ▼ until the tape speed (SP or SL...
Page 31 - To cancel a timer recording that is in progress:; Checking Scheduled Timer Recordings
Timer Recording (cont’d) 3 1 Extending a Timer Recording To make a Timer Recording start and end later than originally scheduled,follow these steps. 1 With the unit on, press SETUP. Press ▲ or ▼ to select TIMER PRO- GRAMMING. Press ENTER. 2 Press RECORD, then press ▲ or ▼ to select the desired progr...
Page 32 - 2 Timer Recording Auto Return; To turn off AUTO RETURN, press
32 Timer Recording Auto Return Use this feature to rewind the tape to the beginning of acompleted timer recording. 1 Press SETUP. 2 Press ▲ or ▼ to select USER’S SET UP. Then, press ENTER. 3 Press ▲ or ▼ to select AUTO RETURN. 4 Press ENTER until ON appears beside AUTORETURN. To turn off AUTO RETURN...
Page 34 - 4 Repeat Play; • Repeat Play stays in effect after; REPEAT
34 Repeat Play • Repeat Play stays in effect after you turn off the TV/VCR/DVD.The TV/VCR/DVD keeps theRepeat Play setting even if thepower fails. • If RENTAL is ON, RENTAL PLAY B will appear on the screen instead of REPEAT PLAY B . Details are on page 35. Helpful Hints Repeat Play allows you to pla...
Page 35 - Rental Play 35; To turn off RENTAL, press ENTER to
Rental Play 35 This function enables you to improve picture quality whenplaying worn cassettes such as rented videotapes. 1 Press SETUP. 2 Press ▲ or ▼ to select USER’S SET UP. Then, press ENTER. 3 Press ▲ or ▼ to select RENTAL. Press ENTER until ON appears besideRENTAL. To turn off RENTAL, press EN...
Page 36 - 6 Zero Return, Sleep Timer; Zero Return; or; Sleep Timer; Each press; To Cancel the Sleep Timer; Press SLEEP until “SLEEP 0 MINUTE” appears.
36 Zero Return, Sleep Timer Zero Return The videotape counter shows the elapsed recording or play-back time in hours, minutes, and seconds from the point atwhich the counter was set to zero. The counter time will notchange on a blank tape or blank portions on a tape. The “–”before the tape counter i...
Page 37 - Time Search 37; Each press of
Time Search 37 Time Search lets you quickly advance the videotape to a posi-tion simply by entering the amount of playback time you wantto skip.In the example below, Time Search is set to 2 hours, 50 min-utes from the present position. 1 Insert a videotape. 2 Press SETUP. Press ▲ or ▼ to select TIME...
Page 38 - 8 Index Search; To cancel an Index Search at this point, press SETUP.
This feature lets you quickly rewind or fast forward to thestart of recordings. ● Index Marks are made automatically at the start of allrecordings. They are not made where recording pauses.The time gap between Index Marks should be greater thanone minute for SP recording and three minutes for SLPrec...
Page 39 - Videotape Playback Features 39; Slow Motion; • During forward and reverse
Videotape Playback Features 39 Slow Motion 1 Press k (pause) during play to pause the videotape. Then press i / g to start slow motion. Sound will be mute during slow motion. Slow motion will stop automatically after five minutesto prevent damage to the tape. 2 Press PLAY B to return to normal playb...
Page 40 - 0 Automatic Operation Features; Details are on page 34.; Automatic Tracking Adjustment
40 Automatic Operation Features The following videotape features are available. Automatic Rewind, Eject, Off When you play, fast forward, or record a videotape to itsend, the TV/VCR/DVD will rewind the tape, stop, turn itselfoff, and eject the tape.If REPEAT PLAY is activated, play will start again ...
Page 41 - Closed Captions 4; • If a black box appears on the
Closed Captions 4 1 Follow the steps below to select closed captions for TV pro-gramming. Not all TV programs and commercials have closedcaptions or all types of closed captions (second language,half-screen text, etc.). If closed captioning is not broadcast,you cannot receive it. This does not indic...
Page 42 - TV Rating Explanations; dren; TV Rating Settings; When entering the access code
42 Setting V-Chip TV Rating Explanations • TV-Y - Appropriate for all chil- dren • TV-Y7 - Appropriate for chil- dren seven and older • TV-G - General Audience• TV-PG - Parental Guidance suggested. • TV- 1 4 - Unsuitable for children under 1 4 • TV-MA - Mature audience only TV Rating Settings V-CHIP...
Page 43 - ings for that category will appear.
Setting V-Chip (cont’d) 43 4 Press ▲ or ▼ to select the TV Rating level at which you want to block viewing, then pressENTER once. If you press ENTER again, the subrat- ings for that category will appear. Details are on pages 44-45. When you select the rating category and set it toBLOCK, the higher r...
Page 44 - TV Rating Subratings; The default code is 0000 (if you
44 Setting V-Chip (cont’d) TV Rating Subratings When you select TV-Y7, TV-PG, TV- 1 4, or TV-MA, you can use the subratings to block specific elements of program-ming, such as language or violence. 1 Press SETUP. 2 Press ▲ or ▼ to select V-CHIP SET UP. Press ENTER. 3 Press the Number buttons to ente...
Page 45 - Press SETUP; to save your settings and remove the
Setting V-Chip (cont’d) 45 • Dialog (D) is not an available subrating for TV-MA. • Blocked subratings will appear beside the rating category in theTV ratings menu. • You cannot BLOCK a subrating (D, L, S, or V) if the main catego-ry is set to VIEW. However, youcan set a subrating to VIEW evenwhen th...
Page 46 - MPAA Rating Settings; MPAA Rating Explanations; • To disable all the MPAA Ratings,
46 Setting V-Chip (cont’d) MPAA Rating Settings You can block TV channel viewing according to the MotionPicture Association ratings. To do so, follow these steps. 1 Press SETUP. 2 Press ▲ or ▼ to select V-CHIP SET UP. Then, press ENTER. 3 Press the Number buttons to enter the four-digit access code....
Page 47 - Changing the Access Code; When doing this for the first time, use; Again, Xs will appear instead of the
• If you enter the wrong code in the CONFIRM CODE space, repeatstep 5. Enter the same new codeexactly in the CONFIRM CODEspace. • If you unplug the power cord or if the power fails, the default codewill be active again (0000).Change your access code again asnecessary. Helpful Hints Setting V-Chip (c...
Page 48 - 8 Multi-Channel Television Sound; Press DISPLAY to see the sound status.; During
48 Multi-Channel Television Sound 1 Press DISPLAY to see the sound status. During TV viewing, press DISPLAY twice. During tape play,press DISPLAY once. When a TV program is broadcast in stereo, STEREOappears in the top right corner of the screen. When aTV program is broadcast in second audio, SAPapp...
Page 49 - Selecting HiFi or Monaural Sound
Multi-Channel Television Sound (cont’d) 49 • Non-HiFi tapes will play in monaural sound automatically. • MTS broadcasts automatically record in HiFi unless you selectSAP before recording. Details areon page 50. Helpful Hints Selecting HiFi or Monaural Sound You can play videotapes in either High Fid...
Page 50 - • If you select second audio when
50 Multi-Channel Television Sound (cont’d) • If you select second audio when second audio is not available,the TV/VCR/DVD will receive andrecord normal audio. Helpful Hint Setting the TV/VCR/DVD to receive orrecord TV programs in Stereo, SecondAudio, or Monaural Sound Because TV channels can broadca...
Page 51 - Title Menus; to select a Title, then press; Play will begin at the Title you selected.; Disc Menus, Title Menus 5; Disc Menus; The DVD’s Disc menu will appear.; o p s B; to select an item, then press; Continue this process to set up all the fea-
Title Menus Some DVDs have a Title Menu, which lists the Titles avail-able on the Disc. Use the Title Menu to play a specific Title. ● Before you begin, press SELECT to put theTV/VCR/DVD in DVD mode. 1 While Disc play is stopped, press TITLE. The Title Menu will appear.If a Title menu is not availab...
Page 52 - 2 Fast Forward/Reverse Search; During Disc play, press and hold
52 Fast Forward/Reverse Search 1 During Disc play, press and hold i / g or j / h on the remote for two seconds. ● During DVD play, pressing and holding i / g or j / h will forward or reverse the picture at two, eight, 50, or 1 00 times the normal playback speed.An h 2, h 8, h 50, or h 1 00 will appe...
Page 53 - Title/Chapter Playback, Time Playback 53; Title/Chapter Playback; During DVD play, press SEARCH MODE; Time Playback
• Title/Chapter playback is not available with some DVDs. Title/Chapter Playback, Time Playback 53 Title/Chapter Playback 1 During DVD play, press SEARCH MODE until CH (for Chapter) or TT (for Title) appears on theTV screen. The number of available Titles orChapters will appear at the right ( /4, fo...
Page 54 - 4 Track Play; and; Using; • The
54 Track Play There are three ways to play a Track on an Audio CD. Usethe Number buttons, the SEARCH MODE button, or i / g and j / h . ● Before you begin, press SELECT to put theTV/VCR/DVD in DVD mode. Make sure an AudioCD is in the disc tray. A Using the Number ButtonsPress the Number buttons to en...
Page 55 - Resume On; • In some cases, you need to press
Paused and Step-by-Step Play, Resume On 55 Paused and Step-by-Step Play 1 During Disc play, press F (pause). Play will pause and the sound will be mute. 2 When playing a DVD, press F (pause) repeat- edly to see the picture advance one frame (orstep) at a time. The sound will remain mute. Pressing PA...
Page 56 - Repeat Play; During DVD or Audio CD play, press REPEAT; • Repeat play is not available with; OFF appears on the TV screen.; Regular play will resume.
56 Repeat Play, A-B Repeat Play Repeat Play 1 During DVD or Audio CD play, press REPEAT until the repeat mode you want appears on the TV.On a DVD, select CHAPTER, TITLE, or OFF. On anAudio CD, select TRACK, ALL (all Tracks on theDisc), or OFF. With MP3 files you can selectTRACK, ALL, or GROUP (all T...
Page 57 - at the top of the TV screen.; Within 30 seconds, press; appears beneath the number.; Disc play will continue from
Markers 57 Use Markers to remember your favorite places on an AudioCD or DVD. To set the Markers, follow these steps. 1 Play the Disc to within 30 seconds prior to the pointat which you want to set the Marker. During play, press SEARCH MODE until the Markersappear at the top of the TV screen. DVD ex...
Page 58 - Camera Angles; The number of available angles appears at the; 8 Subtitles, Camera Angles; Subtitles; The number of available languages
Camera Angles Some DVDs contain scenes recorded from different angles.The camera angle will not change if the DVD does not con-tain sequences recorded from different camera angles. 1 During play, press ANGLE to select a differentangle. The number of available angles appears at the right of the Angle...
Page 59 - Slow Motion, Zoom 59; Zoom; • The sound will be mute during
Slow Motion 1 Press F (pause) during DVD play. 2 Press and hold i / D or H / h for two sec- onds. Slow motion play will begin. Press and hold i / D or H / h repeatedly during slow motion play to play the DVD forward or backward at 1 / 1 6, 1 /8, or 1 /2 the normal speed. 3 Press PLAY B to return to ...
Page 60 - 0 Parental Password; Press SETUP twice
60 Parental Password The Parental feature prevents viewing of DVDs that exceedyour rating limits. This feature will not limit viewing if theDVD is not rated or coded. Check your DVDs and settingsbefore letting children access the TV/VCR/DVD. Follow thesesteps to change your password. ● Before you be...
Page 61 - The password numbers will appear on the; • The default password is 4737.
4 Press p to select CHANGE, then press ENTER. 5 Press the Number buttons to enter a four-digitpassword. The password numbers will appear on the screen. Write down the password so you will not for-get it. Press ENTER. The previous menu will reap- pear. 6 Press SETUP to exit the menu. PARENTAL O K PAR...
Page 62 - 2 Parental Levels; while play is stopped.
62 Parental Levels Follow these steps to set the rating level for your DVDs.DVDs whose ratings exceed the level you set will not play. ● Before you begin, press SELECT to put theTV/VCR/DVD in DVD mode. 1 Press SETUP twice while play is stopped. 2 Press B to select CUSTOM at the top of the menu, then...
Page 63 - The rating levels continue on two menu; Press SETUP to exit the menu.; • When you try to play a DVD
6 Press o or p to select a level, then press ENTER. The rating levels continue on two menu screens. Press o or p repeatedly to move to the next or previous screen to find the rating level youwant. After making your selection, the previousmenu will appear. The level you selected will appearbeside PAR...
Page 64 - 4 Audio Language, Stereo Sound; Audio Language; The new; • If a language is not available after; Stereo Sound; The display will disap-
64 Audio Language, Stereo Sound Audio Language You can select a language for DVDs during play if multiplelanguages are available. 1 During DVD play, press AUDIO repeatedly tochoose one of the available languages. The new audio will be heard. The display will disappear afterabout five seconds.The Aud...
Page 65 - Programmed Play; Random Play, Programmed Play 65; Random Play
Programmed Play You may determine the order in which Audio CD Trackswill play. You also can program MP3 or JPEG files to play ina special order. To set a Program, follow these steps. 1 While play is stopped, press MODE until the PROGRAM screen appears. Audio CD example 2 Press o or p to select a tra...
Page 66 - 6 MP3/JPEG Playback
66 MP3/JPEG Playback The DVD Player will play MP3 or JPEG files that you recordand finalize on a CD-RW (Compact Disc-Rewritable) orCD-R (Compact Disc-Recordable). These Discs may contain pictures in a JPEG format or audioTracks in an MP3 format. For example, you may have photo-graphic film developed...
Page 67 - MP3/JPEG Displays 67; Press DISPLAY; The following may appear to indicate Repeat play.; Press DISPLAY again to remove the display.; • During MP3 playback, the
MP3/JPEG Displays 67 You can review MP3 and JPEG Track (File) information dur-ing playback. 1 Press DISPLAY until the current Track/File number, total Tracks/Files available, and elapsed playing timeof the current Track appear. The elapsed playing timewill not show during JPEG play. The following ma...
Page 68 - 8 Language Settings; While play is stopped, press SETUP twice.; The; The language options for
68 Language Settings You can use the LANGUAGE settings to select different lan-guages for the Audio or Subtitles of DVDs, as well as languagesfor DVD Disc menus. ● Before you begin, press SELECT to put theTV/VCR/DVD in DVD mode. 1 While play is stopped, press SETUP twice. The QUICK SETUP screen appe...
Page 69 - Language Codes
Language Settings (cont’d) 69 5 Press o or p to select a language, then press ENTER. The language lists may continue on multi- ple screens. Press o or p to move to the other screens. ● If you select OTHER, press four Number buttons to enter the code for the language you desire. Usethe Language Codes...
Page 70 - 0 Display Settings; The QUICK SETUP screen will appear.
• Selecting a different TV MODE setting is only effective if it isavailable on the DVD. Check theDVD Disc menu or case fordetails. • You also can adjust TV MODE in the QUICK SETUP menu. WithQUICK selected, press ENTER.TV MODE will be selected, sopress ENTER. Press o or p to choose a setting, then pr...
Page 72 - 2 Audio Settings
72 Audio Settings Change Audio settings based on other equipment you con-nected to the TV/VCR/DVD or according to your Discsound features. ● Before you begin, press SELECT to put theTV/VCR/DVD in DVD mode. 1 While play is stopped, press SETUP twice. The QUICK SETUP screen will appear. 2 Press B to s...
Page 73 - On-Screen Displays 73; Audio CD Display
On-Screen Displays 73 Audio CD Display 1 Press DISPLAY repeatedly to see the followingdisplays during Audio CD play. 2 Press DISPLAY repeatedly or press RETURNto remove the display. 2 Press DISPLAY repeatedly or press RETURNto remove the display. BIT RATE: The amount of audioand video data currently...
Page 74 - 4 Black Level, Virtual Surround; Black Level; Adjust Black Level to brighten the DVD picture.; During DVD play, press MODE; so the Black; Within; ON brightens the dark parts of the; ON; Virtual Surround; During Disc play, press MODE; so the Virtual; OFF; • Virtual Surround is available only
74 Black Level, Virtual Surround Black Level Adjust Black Level to brighten the DVD picture. 1 During DVD play, press MODE so the Black Level icon shows in the top left corner of the TVscreen. 2 Within 1 0 seconds, press ENTER to choose ON or OFF. ON brightens the dark parts of the picture. OFF show...
Page 76 - 6 Helpful Hints; Location
76 Helpful Hints If you are having problems with your product, check this list of problems and possible solutions beforerequesting service. You may be able to solve the problem yourself. Location For safe operation and satisfactory performance of your TV/VCR/DVD, remember the following:• Shield it f...
Page 78 - 8 Specifications; General DVD
78 Specifications Designs and specifications are subject to change without notice and without our legal obligation. General TV/VCR CRT:19MDTR20: 1 9 inch in-line gun, 90˚ deflection tube 27MDTR20: 27 inch in-line gun, 11 0˚ deflection tube Closed Caption system: §15.119/FCC Video Heads: Rotary four-...
Page 79 - Limited Warranty 79
Limited Warranty 79 WHO IS COVERED? You must have proof of purchase to receive warrantyservice. A sales receipt or other document showingthat you purchased the product is considered proofof purchase. WHAT IS COVERED? Warranty coverage begins the day you buy yourproduct. For 90 days thereafter, all p...
Magnavox MRD410B/F7
User Manual
Magnavox 55PW936317F
User Manual
Magnavox 26MF605W/17
User Manual
Magnavox 20MT133S
User Manual
Magnavox CDR785
User Manual
Magnavox CVT325AV01
User Manual
Magnavox MS3652S
User Manual
Magnavox VRT344AT22
User Manual
Magnavox DVDR77/17
User Manual
Magnavox VRZ255AT01
User Manual
Magnavox 34PW850H
User Manual
Magnavox 27DV693R
User Manual
Magnavox PR1310
User Manual
Magnavox 6P4841
User Manual
Magnavox 20MS334R
User Manual
Magnavox VRX262AT21
User Manual