Magnadyne PL30 - Manuals

Magnadyne PL30 – Manual in PDF format online.

Manuals:

Manual Magnadyne PL30

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - The security system is now fully armed!; Security System Operation:; (Using the transmitter to arm the security system); Remote Control Transmitters

2 The information enclosed will provide a ready reference of the operation and maintenance of your newremote mobile security system. 1. Exit the vehicle and close all entrances.2. Press and release the ARM/DIS or LOCK button on the transmitter. The security system will respond as follows: A. The hor...

Page 3 - Disarming the Security System Using the Transmitter

Note: The following information is valid only if your security system has been programmed to automaticallyarm. 1. Turn off the ignition key and exit the vehicle. 2. Close all protected entrances. After the last protected entrance is closed the horn/siren will chirp one time and the LED indicator wil...

Page 4 - The security system is overridden and is now in the valet mode!; How to Get Back to Security System Activation Mode:; Valet Switch in the ON Position

4 Override Operation: (Security System is Armed) 1. Enter the vehicle. (The security system will begin sounding at this point) 2. Place the ignition key into the ignition switch and turn the ignition switch to the “on” position.3. Within 5 seconds of turning the ignition key “on”, flip the valet swi...

Magnadyne Manuals