Magnadyne MV1020 - Manuals - manualsarea.com

Page 2 - Region Management Information:

2 Safety Information . . . . . . . . . . . . . . . . . . . . 2-3 Disc and SD Card Notes . . . . . . . . . . . . . . . . . 4 Screen and DVD/CD Functions . . . . . . . . . . 5-7 Location of Functions . . . . . . . . . . . . . . . . . . 5 Turning the Unit On . . . . . . . . . . . . . . . . . . . 6 Adju...

Page 4 - Disc and SD Card Notes; Label side up; Disc Handling

Disc Formats Supported by this Player: Discs which cannot be played with this player: • DVD-ROM • DVD-R/DVD-RAM • CDV • CD-G 4 Disc and SD Card Notes V I D E O (Single-sided disc only) 8 cm disc 8 cm disc Label side up Do not touchthe undersideof the disc Do not bend Wipe the disc from centertoward ...

Page 5 - Screen and DVD/CD Functions

5 Screen and DVD/CD Functions 1. POWER Button: Press this button to turn the unit On/Off. 2. SOURCE Button: Press this button to change the play source between DVD/CD player and an auxiliary input source. 3. STOP Button: Stops play of picture or audio. 4. Power On LED Indicator 5. Infrared Remote Se...

Page 6 - BRIGHTNESS; Label Side; Changing to an Auxiliary Input Source; Format Selection

Turning the Unit On: Press the POWER on either the remote or thescreen housing. Adjusting the Monitor: 1. Press the MODE button on the remote to activate the monitor adjustment menu. Thefollowing will be displayed on the screen: 2. Press the MODE button again to select the adjustment bar. 3. Use the...

Page 7 - Infrared Remote Control Sensor:; Selecting the Wireless Transmitter Frequency:; FM

Screen and DVD/CD Functions 7 Dome Light Switch Infrared Remote Control Sensor: The Infrared remote control sensor receivesthe signals from the remote control. Wireless Transmitter Modules Wireless Transmitter Modules: The audio signal is converted to an infraredlight and FM frequency that is transm...

Page 8 - Remote Control Locations and Operation

8 1 9 10 6 18 19 11 13 22 23 24 14 15 17 5 2 3 4 16 20 21 8 12 7 25 POWER AUDIO ANGLE SUBTITLE DISPLAY SETUP PLAY/PAUSE PROG CLEAR PREV REV SLOW SD TITLE NEXT FWD A-B REPEAT SOURCE VOL– ZOOM PBC MENU SEARCH ENTER RETURN STOP EJECT VOL+ MODE TFT FUNCTION UP MUTE DOWN 1 4 7 2 5 8 0 10+ 3 6 9 Remote Co...

Page 10 - Basic Operation and Special Functions; PLAY FUNCTION

Slow Play Each time the SLOW button is pressed during DVD play the speed is reduced as follows: 10 Basic Operation and Special Functions Display DVD Menu Screen 1. Press the MENU button to display the DVD menu screen. 2. Use the cursor button to select item.3. Press ENTER or PLAY to play the selecte...

Page 14 - Setup Menu; Last Play Function; OTHER FUNCTION SETTINGS; OTHERS setting selections. Press the ENTER

14 Setup Menu Last Play Function The Last Play function automatically book- marks the position on a DVD/CD disc and remembers the playback settings. Playback will resumes at the position which the player was turned off, the disc was ejected, or the power was cut off. Turning Off Last Play Function P...

Page 15 - Installation; Custom Bracket Mounting System (Optional)

15 Installation When installing the MV1020 using a Custom Bracket Mounting System refer to the instructions included with with the bracket. Warning: Take extra care not to penetrate the roof of your vehicle during installation. Vehicle’s Ceiling Support Beams Custom Bracket Mounting System (Optional...

Page 16 - Wiring Diagram; Mini DIN Connector

16 Wiring Diagram Black (Video Out) White (L-Audio Out) Red (R-Audio Out) Audio Video Output (Female RCA) Mini DIN Connector Black Wire - Ground Red Wire - Ignition Yellow Wire - Battery Blue Wire - Door (+) Yellow (Video In) White (L-Audio In) Red (R-Audio In) Audio Video Input (Female RCA) 3A

Page 17 - Wiring Instructions

17 Power Harness Wiring: The 4-wire harness provides battery and ignition 12 volts as well as a chassis ground. Route the power harness to the point in the vehicle that you will make the connections. Red Wire: The red wire in the harness should be connected to a +12 volt power wire that is turned on...

Page 18 - Troubleshooting

18 Only qualified service personnel can removethe cover or service this player. Otherwise thewarranty will become invalid. No Power: • Check to see if the player is set to “On”.• Check to see that the power plug of the main unit is properly connected. • Check to see if that power to the outlet is pr...

Page 19 - Replacement Parts Order Form

19 Replacement Parts Order Form Send Orders To : Magnadyne Corporation We Accept Checks, Money Orders, Visa and Master Card ATTN: Consumer Parts Sales Make Checks Payable to: Magnadyne Corporation P. O. Box 5365Carson, CA 90749-5365 SHIP TO: (No P.O. Boxes) LAST NAME FIRST NAME INITIAL STREET ADDRES...

Page 20 - DESCRIPTION; DVD Remote Control; agents. Such cost are the sole responsibility of the purchaser.; Warranty

Order By Mail Replacement Parts for MovieVision ® Systems DESCRIPTION MODEL # PRICE DVD Remote Control MV-1020RM $39.95 Ea. ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within 1 year from the date of sale to you, repair, replace or refund the retail sales price o...