Magnadyne M8a - Manuals

Magnadyne M8a – Manual in PDF format online.

Manuals:

Manual

Manual Magnadyne M8a

Summary

Page 2 - WARNINGS

2 Congratulations on your purchase of a quality Marksman automotive security and remote startsystem. Marksman security products have been designed to provide the consumer with atechnologically superior product with years of trouble free operation. The information enclosed willprovide a ready referen...

Page 4 - LED

Note: The factory default setting at “Power Save Mode”, before operation the 2-way LED remotecontrol transmitter, press the button first, within 3 seconds press and hold the buttonfor 3 seconds, with two beeping sound to indicate exit the “Power Save Mode” and all remotetransmitter is on function. P...

Page 5 - Actions of the 2-Way LED Remote Control Transceiver

5 Chirp Indicators Alarm Operating Condition Parking Lights 1. Press the button on the transmitter.2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The vehicle door will lock upon arming when interfaced with the security system. Actions of the 2...

Page 6 - Hidden Alarm Function:; silenced even if the sensor is triggered in the armed status.; Passive Arming with Passive Door Locking:

6 Ajar Warning: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar (Depending on howyour system is programmed, you will hear the chirps immediately or within 30 seconds). Silent Arming/Disarming: Press the transmitter and button at the same time to arm or disarm your se...

Page 7 - Standard 5-Button Transmitter; LED indicator on the transmitter will be on for 2 seconds.; -Way LED Transmitter; second vehicle for any length of time by performing these steps:; Pathway Illumination:; seconds upon the lock signal.; Two Step Door Unlock:; the 60 second timer has elapsed.; Second Vehicle System Control

Standard 5-Button Transmitter The transmitter supplied can operate a second system in another vehicle by repeating the following steps: 1. Press the button one time prior to attempting control of the second vehicle system. The LED indicator on the transmitter will be on for 2 seconds. 2. Press the b...

Page 8 - Zz; Actions of the 2-Way LED Remote Control Transceiver Melody Sound; Melody Sound; Valet Mode (System in Disarm or Valet Mode); the disarm mode. You can now start and operate the vehicle normally.; Disarming without a Transmitter

8 The valet switch allows you to temporarily bypass all alarm functions, eliminating the need to giveyour transmitter to parking attendants or garage mechanics. When the system is in valet mode, allalarm functions and remote start functions are bypassed. However, the remote panic feature andremote d...

Page 9 - Noise Abatement Circuit:

9 The transmitter can be used as a remote panic switch to manually trigger the alarm in case ofemergency: 1. Press and hold the button for 3 seconds. The alarm will immediately sound. 2. During panic mode, the normal function of this transmitter button will be suspended. The transmitter and buttons ...

Page 10 - Override the System to Turn Off Anti-Car Jacking:; will stop and the system will be disarmed.

10 Warning: If you don't require the anti-car jacking function in this alarm system, be sure that it is setto “OFF”. The default setting for anti-car jacking is “OFF” (See Installation Guide). Active Anti-Car Jacking: 1. Press and hold the transmitter and button at the same time for 2 seconds while ...

Page 11 - Indoor Driving Paging:; sounding from your 2-way remote control transceiver.; Outdoor Driving Paging:; from your 2-way remote control transceiver.

LED Armed LED turns on for 5 seconds Disarmed LED turns on for 5 seconds Valet Mode Zz z LED turns on for 5 seconds Engine Running LED Fast flash for 15 seconds Hood/Trunk Ajar LED flash for 15 seconds Door Open LED flash for 15 seconds 11 Press the button twice to check the system’s present status ...

Page 12 - Upon disarming, the interior light will remain on for 30 seconds.

12 Press the transmitter (6) and (6) buttons at the same time to active Channel 6 function.Channel 6 is user-programmable timer output. You may program the built-in timer to send aground signal for any time duration from 1 to 120 seconds. For instance, this timer output maybe used to turn on the hea...

Page 13 - REMOTE START OPERATION; Press the button twice on the transmitter.; indicator will flash 3 times to confirm.; To Remote Start the Vehicle

13 REMOTE START OPERATION 1. Press the button twice on the transmitter. 2. The parking lights will be activated, indicating the remote start received the signal. 3. The engine will start approximately 5 seconds. 4. Once the engine is running, after a couple seconds the parking light will turn on aga...

Page 14 - seconds press the button once.; Exit the Timer Start:; Timer/Temperature Start; after you have left the vehicle.

This unit can be programmed to start and run the engine every 3 hours. The engine will run for theprogrammed time and then shut down. IMPORTANT: Timer Start should be used only in open areas. Never start and run a vehicle in anenclosed space such as a garage or carport. 3-Hour Timer Start with Tempe...

Page 15 - To stop the engine that is running by remote start:; To Turn Off the Remote Start

To stop the engine that is running by remote start: 1. Press the button twice on the remote transmitter in the Remote Start Mode. 2. Move the optional remote start enable toggle switch to the “OFF” position (if installed). 3. Press the brake pedal. The vehicle will shut down and turn off the parking...

Page 16 - Regular Remote Transmitter:; This will remind the user to replace the battery.; Transmitter Battery Replacement

16 Regular Remote Transmitter: If the range of your transmitter deteriorates, it is possible that the battery needs to be replaced. 1. Remove upper transmitter case.2. Remove old battery.3. Install two new CR2016 battery (3 volt), noting the (+) and (-) marks.4. Replace upper transmitter case with c...

Page 17 - REPLACEMENT PARTS AND ACCESSORIES

17 REPLACEMENT PARTS AND ACCESSORIES 2-Way LED Remote Transceiver M8ARF-LED $89.95 ea. Remote Transmitter M5ARF $46.96 ea. TRANSMITTERS DESCRIPTION MODEL NO. PRICE BATTERIES DESCRIPTION CR2016 - 3 Volt Lithium Battery Replacements: RadioShack: #CR2016 Duracell: #DL2016 Eveready: #ECR2016 Panasonic: ...

Page 18 - Credit Card or Money Order Only; VISA; PARTS AND ACCESSORIES ORDER FORM

18 Credit Card or Money Order Only (Sorry No Cash, C.O.D. or personal checks accepted) SHIP TO: (No P.O. Boxes) LAST NAME FIRST NAME INITIAL STREET ADDRESS ADDITIONAL ADDRESS ADDITIONAL ADDRESS CITY STATE ZIP CODE DAY TIME PHONE NUMBER PART # DESCRIPTION QTY. PRICE EACH TOTAL Sales Subtotal = ______...

Page 19 - LIMITED LIFETIME WARRANTY; are only a deterrent against possible theft.

19 LIMITED LIFETIME WARRANTY Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purchaser, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if s...