Page 2 - Regular Transmitter Operation; Operation; Transmitter
Congratulations on your purchase of a quality Marksman automotive security and remote startsystem. The information enclosed will provide a ready reference of the operation and maintenanceof your new Marksman security and remote start system. Regular Transmitter Operation Operation Lock Doors and Arm...
Page 5 - Passive Arming
5 Arming While Driving:(See Alarm Feature Programming Part 1-6) Your system can be armed while driving the vehicle! Simply press ( ) button for 2 secondswhile the vehicle is running, or the ignition is on. the system will chirp once and then once more toindicate the ignition is on. The system will n...
Page 6 - the disarm mode. You can now start and operate the vehicle normally.
6 Optional Sensor Trigger Ignition Trigger Tamper Disarming: If alarm triggered, upon disarm the system, siren chirp 4 times, parking light flash 3 times. Pathway Illumination: (See Alarm Feature Programming Part 2-4) This feature turns the parking light "ON" for 30 seconds upon a unlock sig...
Page 7 - exiting the valet mode.; Remote Door Lock; Valet Mode (System in Disarmed or Valet Mode)
The valet switch allows you to temporarily bypass all alarm function, eliminating the need to handyour transmitter to parking attendants or garage mechanics. When the system is in valet mode, allalarm function and remote start function are bypassed, however the remote panic feature andremote door lo...
Page 8 - When armed, your vehicle is protected as follows:
Doors Trigger Trunk/Hood Trigger Shock Sensor Trigger Optional Sensor Trigger Ignition Trigger When armed, your vehicle is protected as follows: 1. Light impacts will trigger the warn-away signal. A (3) long chirp from siren/horn.2. Heavy impacts, doors open, hood open, trunk open/turn on the igniti...
Page 9 - Dome Light Convenience Delay and Supervision
Passive Car Jack: It operate as below:1. Turn the ignition switch to "ON", the system will arm.2. Once the system is armed, if you are forced from the vehicle, the system will trigger when the door is opened and closed while the ignition is "ON". Trigger the Car Jack Mode: 3-timer ci...
Page 10 - Remote Start Operation; precautions that you must practice and be aware of.
When you want to check the system's present status thru the LCD screen, press the ( ) buttonon the "Two Way LCD Screen Transmitter". With one melody sound, the system's status will beshown on the LCD screen.Note: Press "SET" for 2 seconds with 2 beeps confirmation to clear the trigge...