M-Audio CX8 - Manuals

7 English Studiophile TM CX8 User Guide 5. Hardware Controls and Indicators Rear Panel 1 Input Gain Knob : This knob adjusts the gain level of the XLR/TRS 3 and RCA 2 inputs. The gain is at minimum when the knob is turned fully counter-clockwise; the gain is set to its maximum level when the knob is...

8 7 Acoustic Space Switch : This switch allows you to set a “shelf” EQ to tailor low frequency response to your specific studio. See the section entitled “About the Rear-Panel EQ Contour Switches” to learn more about this switch. 8 HF Trim Switch : This switch allows you to adjust the high-frequency...

9 English Studiophile TM CX8 User Guide 6. Connection Diagram M-Audio CX monitors feature balanced XLR/TRS “Combo” and unbalanced RCA-type analog inputs on the rear panel. Connect the outputs of your mixer, audio interface, or other line-level device to these inputs. Audio Interface (Balanced TRS to...

10 7. Setting up CX Monitors The configuration and placement of your CX monitors within your studio may affect the performance of the speakers. Use the following tips to achieve the best possible performance out of your CX monitors: Speaker Placement Place the CX monitors so that the two speakers an...

11 English Studiophile TM CX8 User Guide About the Rear-Panel EQ Contour Switches These switches allow you to tailor the EQ curve of your CX monitors to complement the frequency response of your studio. Since studio monitors (including the CX series) are designed to have a flat frequency response, y...

12 3. Using a subwoofer: If you plan to use a subwoofer with your CX monitors, you will need to filter out low frequency sounds so that only the subwoofer plays low-frequency sounds (the CX monitors will only play midrange and high-frequency sounds, in this scenario). This needs to be done so that t...

13 English Studiophile TM CX8 User Guide HF Trim Switch 8 This control allows you to boost or attenuate (reduce) your CX monitors’ high frequency response above 3kHz. This switch can be set in the following ways: 0dB This default setting leaves high-frequency signals unaffected (high frequency sound...

14 LF Cutoff Switch 10 This control allows you to engage a high-pass filter that removes low-frequency sounds from the monitors. This switch can be set in the following ways: Flat This default setting allows your monitors to play their entire frequency spectrum with no low-frequency filtering. 60Hz ...

15 English Studiophile TM CX8 User Guide 8. Appendix A - Technical Specifications Frequency response: 38Hz-30kHz (+/-3dB) Crossover frequency: 2.7kHz Low-frequency amplifier power: 80 watts with 14 gauge wiring to this transducer High-frequency amplifier power: 40 watts with 14 gauge wiring to this ...

16 CX8 - Frequency Response 20 Hz 50 100 200 500 1K 2K 5K 10K 20K 30K dBSPL 65 70 75 80 85 90 95 100 105

17 English Studiophile TM CX8 User Guide 9. Warranty Warranty Terms M-Audio warrants products to be free from defects in materials and workmanship, under normal use and provided that the product is owned by the original, registered user. Visit www.m-audio.com/warranty for terms and limitations apply...

M-Audio USA | Avid Technology • M-Audio | www.m-audio.com 5795 Martin Rd., Irwindale, CA 91706 Technical Support web www.m-audio.com/tech tel (pro products) (626) 633-9055 fax (shipping) (626) 633-9032 tel (consumer products) (626) 633-9066 Sales e-mail [email protected] tel (866) 657-6434 fax (626)...