M-Audio 1010-AI - Manuals - manualsarea.com

Page 3 - Front and Back Panel Descriptions; Front Panel

Front and Back Panel Descriptions Front Panel 1. ADAT to Host “Enabled” LED: When lit, this LED indicates that “ADAT to Host” mode has been enabled. 2. ADAT to Host Button: Pressing this button and locking it to the “in” position will enable “ADAT to Host” mode. The incoming Delta 1010-AI ADAT signa...

Page 4 - Back Panel

Back Panel 1. 9v DC Power Adapter Jack: This jack accepts a 2.5 mm, 9v center positive 500 mA power supply, provided with your Delta 1010-AI . Use only the proper power supply to power your Delta 1010-AI . 2. ADAT In Jack: This TOSlink standard optical jack accepts an 8-channel ADAT optical output s...

Page 5 - Your setup should look like this:; Hooking Up Your ADAT Optical Device; the; TM; Delta

Your setup should look like this: NOTE: If you are using your Delta 1010 solely for optical transfersand do not need A/D or D/A capability, it is not necessary toc o n n e c t t h e D e l t a 1 0 1 0 r a c k m o u n t u n i t . H o w e v e r,synchronization via MTC may be desired, and your Delta sys...

Page 6 - AD

4. Plug the other end of the second optical cable into the TOSLink input jack of your ADAT or other 8-channel optical capable device. If you are using a single ADAT for this example, your setup should look likethis: Using Your Delta 1010-AI Adding the Delta 1010-AI to the Delta 1010 Recording System...

Page 7 - Note: All switches are shown in

Any device that transmits or receives the ADAT optical format may be usedwith the Delta 1010 ADAT Interface. Many digital mixers use this ADAT“standard” 8-channel format, as do other computer interface cards. The audioyou wish to transfer may come from or go to devices such as these. The Delta 1010-...

Page 9 - S t a n d a l o n e M o d e :

Analog Ins to ADAT: When “Analog Ins to ADAT” mode is enabled, the analog inputs 1 through 8 on your Delta 1010 rack mount unit are routedthrough the rack unit’s 24 bit A/D converters to the ADAT Optical output ofthe Delta 1010-AI . Select this mode when you wish to use the A/D converters on your De...

Page 10 - Master Clock Settings and the Delta 1010-AI

Analog Outs,” “Analog Ins to ADAT,” and “ADAT Thru” are the modes thatwill function independent of the host computer, hence the term “standalone.” The standalone mode functions are also available when the Delta 1010-AI is attached to the computer and the computer is powered on. However, asdescribed ...

Page 11 - Synchronizing your ADATs; You may need to keep your ADAT(s) in sync while transferring

Synchronizing your ADATs Using a BRC: You may need to keep your ADAT(s) in sync while transferring audio to the Delta 1010 Recording System. This is made simple using theAlesis BRC, by taking MTC (MIDI timecode) from the MIDI output of the BRCto the MIDI input of the Delta 1010. A digital mixer may ...

Page 12 - Limited Lifetime Warranty

Limited Lifetime Warranty MIDIMAN warrants that this product is free of defects in materials andworkmanship under normal use so long as the product is: owned by theoriginal purchaser; the original purchaser has proof of purchase from anauthorized MIDIMAN dealer; and the purchaser has registered his/...