Page 2 - Safety Warnings
2 Safety Warnings This instructions are for your safety. Please read them thoroughly prior to installation and retain them for future reference. The appliance is not to be used by persons sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision o...
Page 7 - Using the Touch Controls
7 A Word on Induction Cooking Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by electromagnetic vibrations generating heat directly in the pan, rather than indirectly through heating the glass surface. The glass becomes hot only because the pan eventual...
Page 8 - Choosing the right Cookware
8 Choosing the right Cookware • Only use cookware with a base suitable for induction cooking. Look for the induction symbol on the packaging or on the bottom of the pan. • You can check whether your cookware is suitable by carrying out a magnet test. Move a magnet towards the base of the pan. If it ...
Page 9 - Using your Induction Hob To start cooking
1. Touch the ON/OFF control for 3 seconds. After power on, the buzzer beeps once, all displaysshow"一", indicating that the induction hob has entered the state of standby mode. 2. Place a suitable pan on the cooking zone that you wish to use. • Make sure the bottom of the pan and the surface ...
Page 10 - Beware of hot surfaces; Using the Boost function; Actived the boost function; • The function can work in any cooking zone.
If the display flashes· ::: 巴 乏 alternately with the heat setting This means that: •You have not placed a pan on the correct cooking zone or,•The pan you're using is not suitable for induction cooking or,•The pan is too small or not properly centred on the cooking zone. No heating takes place unless...
Page 11 - Using the Keep warm Function; Using the Pause Functio; Flexible area
Using the Keep warm Function I.Touch the cooking zone selection button that you wish to use keep warm,an indicator next to the key will flash. 2.Touch the button, 卢and hold for 3 seconds, the cooking zone indicator willdisplay'e 3.If you want to cancel the keep warm, select the cooking zone you wish...
Page 13 - Over-Temperature Protection; Using the Timer
13 Power level 1~3 4~6 7~8 9 Default working timer (min) 360 180 120 90 To unlock the controls 1. Make sure the Induction hob is turned on.2. Touch and hold the keylock control for a while3. You can now start using your Induction hob. Over-Temperature Protection A temperature sensor equipped can mon...
Page 15 - When using “the timer as an alarm” and “the timer to swith off the
15 3. Using the “+” and “-” buttons, you can realize the setting of timing from 1 to 99 minutes. Hint: Touch the “-” or “+” control of the timer once will decrease or increase by1 minute.Touch and hold the “-” or “+”control of the timer will decrease or increaseby 10 minutes.Touching the “-” and “+”...
Page 16 - Failur; Technical Specification; Zones; Supply Voltage
16 Error Message Possible Cause What to do No pot or pot not suitable; Replace the pot; ER03 Water or pot on the glass over the control Clean the user interface F1E The connection between the display board and the left mainboard is fail (the cooking zone which indicator showing “E”) 1.Connection cab...
Page 17 - Installation; Selection of installation equipment
17 Installation Selection of installation equipment Cut out the work surface according to the sizes shown in the drawing.For the purpose of installation and use, a minimum of 5 cm space shall bepreserved around the hole.Be sure the thickness of the work surface is at least 30 mm. Please selectheat-r...
Page 18 - When you have installed the hob, make sure that; locating the fixing brackets; Th e uni t shoul d b e place d o n a stable , smoot h surfac e (us e th e
18 Before locating the fixing brackets The unit should be placed on a stable, smooth surface (use the packaging). Donot apply force onto the controls protruding from the hob. Before you install the hob, make sure that • The work surface is square and level, and no structural members interfere with s...