Lowrance LGC-BAJA - Manuals

Lowrance LGC-BAJA – Manual in PDF format online.

Manuals:

Manual Lowrance LGC-BAJA

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - Mounting the LGC Module; Surface Mount

2 Tools and Supplies Recommended tools include pliers and a flathead screwdriver. If you need to route the module connector through a bulkhead, you will need a drill and a 7/8” (22 mm) drill bit. If you are mounting the module directly to flat, horizontal surface, you will need a #31 (3 mm) drill bi...

Page 3 - Powering Your GPS Module; Your LGC GPS module is powered by the NMEA 2000 network, so your net; Expanding a NMEA 2000 network; If you want to expand your NMEA 2000 network by adding more devices,

3 Pole Mount The GPS module attaches to the pole mount adapter with the supplied 4 mm screws. You can route the cable through the notch in the module housing and down the side of the pole or you can pass it through the pole mount adapter and run the cable inside the pole. The 1”-14 threads on the po...

Page 4 - Notes

Lowrance Manuals