LOEWE Modus L 32 - Manuals

5 - Antenna/cable/analogue/digital Audio output left/right (analogue) Audio input left/right (analogue) Center audio input (analogue) Headphone connection S-VHS connection (AVS) (i.e. for camcorders) Common interface (CI-Slot) Video input (AVS) Audio input right Audio input left Mainsswitch Euro-AV-...

- 6 Connections to rear panel – Xelos A 32/37 and Modus L 32/37 ✳ Set-specific equipment and retrofitting options for PIP and satellite tuners, see pages 44 and 45. Headphones connection Common Interface (CI-Slot) S-VHS connection (AVS) (i.e. for camcorders) Video input (AVS) Audio input right Audio...

7 - 89352.001 SERVICE VGA/XGA HDTV IN AUDIO OUT AUDIO DIGI TA L IN L R OUT AUDIO IN L SD/HD-COMPONENT IN C / P r r Y C / P b b R C AV 2 RGB / YUV ( ) AV 1 ANT -TV ANT -S AT 13/18 V /350 mA 5 V /80 mA HDMI DVI ( ) Common interface (CI-Slot) Headphone connection S-VHS input (AVS) (i.e. for camcorders)...

- 8 Welcome Transporting Only transport the unit in an upright position. Hold the set by the top and bottom edges of the housing. The plasma/LCD screen is made of glass and/or plastic and may break if not handled carefully. Should the LCD screen become damaged or should the liquid crystal begin to l...

9 - Call up the Index using the INFO button on the remote control, select “DRM (Digital Refresh Mode)“ and start the Refresh mode by pressing the OK button. Al- ternating full-screen colour images will be displayed now instead of the TV picture. Run the Refresh mode for about as long as a freeze pic...

- 10 For your safety For your safety and to avoid unnecessary damage to your TV set, please read and observe the following safety instructions: • This TV set is designed exclusively for reception and reproduction of video and audio signals. • This equipment is designed for domestic and office enviro...

11 - First installation Remote control Batteries To insert or change the batteries, press on the arrow. Slide the battery compart-ment cover downwards and remove it. Insert LR 03 alkaline-manganese batteries (AAA) and ensure that the + and - ends are positioned correctly.Then push the cover back on ...

- 12 First installation If the reception conditions are good, then a room antenna may be used for DVB-T. Passive and active room antennas are available on the market. The power is sup-plied for an active antenna via the antenna connection. For automatic programming or in “TV Menu – Connections – Ant...

13 - First installation Automatic programming Automatic programming of the TV set is started the first time you switch it on. Follow the menus. Settings can be selected by pressing one of the directions ... ... and confirm your settings by pressing OK . You then go to the next menu. Back to the prev...

- 14 First installation Directing DVB-T antenna Note: not with DVB-T stations in UK.If you use a room antenna to receive one or more DVB-T stations that have picture and sound interference, then you should change the location of where the antenna is set up. To help you direct your antenna or to help...

15 - Daily operation Changing stations ... with the P+/P- buttons on the remote control Stations up/down When changing, the station display is visible for a few seconds. If additional languages are broadcast with DVB stations, then the set displays the language/sound selection under the station disp...

- 16 Daily operation Set the bass tones by using . If you want to make other sound settings, move up with to “Bass“ and select with , e.g. “more...“. You can also move up further to “Sound“ by using and select other settings in the TV menu (such as picture settings). Use OK to call additional sound ...

17 - Daily operation For the info system ... For each menu point, an info text is displayed at the top of the picture to help you with the setting. This saves you from having to refer back to the operating instruc-tions. We shall demonstrate this using the station search option as an example: Call t...

- 20 Operating modes – TV TV In initial installation and daily operation, the TV set is in TV mode. This is also the case when none of the other modes of operation, such as EPG, Teletext, PIP or Radio, have been selected.Each of these operating modes has a separate menu with separate functions for t...

- 22 DVB subtitles If the station provides DVB subtitles, then you can have the TV display them permanently or suppress their display. You can also select between subtitles “for translation“ or “for impaired hearing“.1. Call the “TV menu“ via the MENU button. 2. Select the “Settings“ line and confir...

25 - Picture in picture (PIP) Note: The coloured keys do not work as described below with DVB-T stations in UK, but they operate as described on page 30 (Digital Teletext).Picture in picture displays are possible if the set has an analogue PIP tuner or a di-gital satellite tuner in addition to the a...

- 26 Operating modes – PIP Functions in the PIP menu In the PIP menu, you can set the PIP type (small picture or split screen) and the position of the small picture. Call the PIP menu (PIP must be active, green bar/frame) Setting the PIP type You can have the PIP picture displayed as a small PIP or ...

27 - Operating modes – EPG When receiving digital terrestrial and digital satellite stations, you may find that two identical EPG data are displayed in the “EPG (DVB)“ menu for one station. If you call the EPG menu in the EPG mode by using the MENU button, then select “Station selection,“ you can se...

29 - Operating modes – Teletext In Multiple pages , scroll using . You can see which multip- les pages can be called in the bottom menu line. Call contents page 100 Call the TOP table The TOP table is a general list of teletext. You can only call the table for stations that use the TOP operating sys...

31 - Operating modes – Radio Radio You can only receive radio stations via DVB. If you do not have any DVB radio reception, you can play a sound signal from an external device using the TV set via the sound/AV inputs. Use the RADIO button on the remote control or the R on the control ring of the TV ...

- 32 Operating additional equipment Search for and store the station of the video recorder (if no Euro-AV cable is available) Switch on the test station on the VCR or insert a recorded tape and start playback. In some video recorders the station must be switched on by activating the modu-lator. Then...

33 - Operating additional equipment Timer recording with video or DVD recorder You can programme timer recordings on the TV set. Programming can be done with the EPG programme guide (not with DVB-T in UK), teletext or manually. Call the “Timer list“ menu with the button and press the red coloured ke...

- 34 Operating additional equipment Audio output “AUDIO DIGITAL OUT“ The digital audio signal is applied at the “AUDIO DIGITAL OUT“ socket of the TV. For example, you can connect an external digital audio amplifier or the Loewe Auro system here. An analogue audio signal from the TV set or another so...

- 36 Operating additional equipment Connecting other audio amplifiers or active speakers In the connection wizard, select “ HiFi/AV amplifier “ under “Equipment selection: audio component“. The connection wizard allows configuration of different audio amplifiers (stereo amplifiers, surround amplifie...

37 - Operating additional equipment HDMI (DVI) connection The HDMI connection (High Definition Multimedia Interface) allows digital picture and sound transmission via a connecting cable, e.g. from Loewe DVD Recorder Centros 2102/2172 HD. The digital picture and sound data are transmitted without dat...

- 38 Operating additional equipment Sound from PC or Set Top Box Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN L/R on the TV via a cinch cable. The sound is reproduced via the TV speakers.If you have connected a digital external audio amplifier, you can select the dig...

- 42 Technical data General data Type Xelos A 26 Xelos A 32 Xelos A 37 Xelos A 42 Order no., versions DVB-T/C CI 66416x87 66418x87 66419x87 66421x87 Versions DR+ DVB-T/C CI – 66418x47 66419x47 66421x47 MHEG-5 versions DVB-T CI 66416x27 66418x27 66419x27 66421x27 MHEG-5 versions DR+ DVB-T CI – 66418x...

43 - ✄ The code number 3001 cancels out a secr et code and with it the child lock. Please keep in a safe place. Technical data Electrical data Chassis name L 2650 Power supply 220 V -240V/50- 60 Hz Tuner VHF/UHF/ cable Hyperband 8 MHz 41 MHz to 860 MHz Station storage locations 1680 TV standards B/G...

- 44 Accessories Wall holders and stands Refer to the notes on the installation options on page 8. PIP tuner The PIP tuner enables picture in picture displays (PIP) for analogue terrestrial and cable reception. You can retrofit either this PIP tuner or a digital satellite tuner. The PIP function is ...

45 - Accessories Retrofitting options The following table shows the equipment and retrofitting options for the individual device versions. Device version Equipment Item no. version PIP-Tuner (1 Digital Digital single SAT tuner (1 twin SAT tuner (2 Modus L 32 DVB-T/C CI 66446x87 ° ° – Modus L 32 DVB-...

- 46 Service addresses Printed in Germany5/02.07/10,0/PsSubject to modi fi cations Kjaerulff 1 A/S C.F. Tietgens Boulevard 19 5220 Odense SØ, Denmark Tel. +45 - 66 13 54 80 Fax +45 - 66 13 54 10 Email [email protected] Gaplasa S.A. Conde de Torroja, 25 28022 Madrid, España Tel. +34 - 917 48 29 60 ...