LOEWE 32 - Manuals

5 - ANT OUT (1 Connect antenna output with ANT-TV (tuner 1) ANT-TV Antenna/cable analogue/digital (Tuner 1) mains switch CONTROL (1 - rotating stand control RS-232C (1 - serial interface AUDIO IN1 L/R - audio input left/right (analogue) AUDIO OUT L/R - audio output left right (analogue) ANT SAT2 (1 ...

- 6 ANT OUT (1 Connect antenna output with ANT-TV (tuner 1) ANT-TV Antenna/cable analogue/digital (Tuner 1) mains switch CONTROL (1 - rotating stand control RS-232C (1 - serial interface AUDIO IN1 L/R - audio input left/right (analogue) AUDIO OUT L/R - audio output left right (analogue) ANT SAT2 (1 ...

7 - Welcome Thank you! Loewe sets high standards in technology, design and user friendliness. This applies equally for TV, video and accessories. Your new TV set is equipped for the TV standard "HDTV" (High Definition Television). With its high definition screen and the future-oriented digit...

- 8 Welcome Operating convenience with wizards This TV set offers user prompting with wizards that take you through the settings step-by-step.You can return to the previous step or exit the wizard at any time. The wizards in overview Initial installation The initial installation wizard helps you wit...

9 - For your own safety and to prevent unnecessary damage to your device, read and comply with the following safety instructions: Proper use and environmental conditions This TV set is intended exclusively for the reception and reproduction of video and audio signals and designed for the home and of...

11 - Installing the TV set Install as manually rotatable table unit with the Table Stand included.See accessories (page 58) for other installation options. Preparing the remote control unit Inserting or replacing batteries Press the embossed arrow and push down the battery compartment cover.Insert t...

- 12 Turning the set on/off Switching the TV set to standby mode Actuate the mains switch on the bottom of the set.The display in the control panel on the front of the set will be illuminated red, the set is now in standby mode. Switching the TV on/off on the control unit Press the centre of the on/...

13 - Normally, you do not need to change the values for high and low band, unless the LNC (LNB) of your satellite system uses a different oscillator frequency (important for the frequency display).After you have made these settings, you should receive the picture and sound of the selected satellites...

15 - Operating convenience The info display The info display shows a content-based info text for each menu item at the top edge of the screen to aid you in making the settings. In conjunc-tion with the index it makes a convenient control system. ž A menu is displayed. The factory setting is that the...

- 16 Operating convenience The index in the TV set You can start all wizards and many operating functions directly from this point. The complete function scope of the TV set can thus be easily understood.Alphabetic sorting is preceded by the items Language , Integrated features and Repeat initial in...

17 - TV menu – Overview diagram Operating convenience Radio menu – Overview diagram Settings Stations Parental lockTimer functions TV menu Picture Sound Connections Radio menu Sound Stations Timer functions Recording (7 Recording wizard (1 Timer listPre-record timePost-record time New devices/modifi...

- 18 Select station With the keys P+ and P - on the remote control P+/P– station up/down. The station display with sound identification is displayed briefly. ž If favourites are selected, the station in the favourites list is switched over with P+/P– (see page 19). ž If other languages or DVB subtit...

19 - Daily operation With the favourites lists You can save and call your favorite stations in 6 favourites lists (e.g. for multiple users). Each favourites list can contain up to 99 stations. After initial installation, 10 stations from the station list are already stored in the first list. Change ...

- 20 Daily operation Adjusting the sound Switching sound on/off Sound off;Sound on: Press button again or set volume V+ . Setting the volume V+/V– volume louder / quieter. The volume bar will be shown briefly if no other menu is displayed. Call sound adjustment Call Sound adjustment . Select sound a...

21 - Adjusting the picture Call TV menu . Select Picture , go to the menu line below. Select the desired picture function, go to the menu line below. Make changes. Explanations of the picture settings: Switches the picture parameters between standard and personal values.Adjust contrast.Adjust the co...

- 22 Daily operation Button functions Every operating mode of the TV set (TV, Radio, Teletext, EPG, PIP, PhotoViewer, MusicBox and DR archive, if equipped with Digital Recorder) has its own menu and own functions for the coloured buttons. The function of the coloured buttons is shown at the bottom o...

- 24 Managing stations TV stations Various options for managing stations are available via the TV menu. For example the description for TV stations. For radio stations the same applies, except that the Radio menu is called in Radio mode (see also page 36). ž Station management is not possible if a p...

27 - Managing stations Put together / change favourites list Each favourites list can contain up to 99 stations. You can put together the favourites lists to suit your requirements (e.g. topic lists). Other persons using this TV set can create their own favourites lists. The favourites lists also ha...

- 28 Picture in Picture (PIP) The concurrent display of two different images is referred to as Picture in Picture. ž The coloured buttons do not work as described below for TV sets with TV sets with MHEG-5 Software, but they operate as described on page 33 (Digital , but they operate as described on...

- 30 Adjusting the programme list ž The selection is at the top of the specifications, if not, press the blue button . Select Date , Time , Stations or Topics . Select defaults within the respective line. Example If you are looking for the next news broadcast, select today's date, until 17.00 for ex...

31 - You can remove certain stations from the programme guide. These stations must be deactivated in the Station selection . First, all stations for which programme infor- mation can be provided are marked with a  . Stations without a  are not included in the programme guide. With the coloured but...

- 32 Additional page selection possibilities 1st possibility: Call overview page 100 . 2nd possibility: Directly enter the page number. 3rd possibility: ž The page includes 3-digit page numbers. mark desired page number. OK to call the page. 4th possibility: ž The page consists of several sub-pages ...

33 - Programming timer recordings via Teletext ž Teletext is started, if not, press the TEXT button . Call the programme pages of the current station. Green button: Go to the appropriate page. Select the desired programme, OK to programme the recording. Change the appropriate recording data in the f...

- 34 Conditional Access module (CA module) In order to be able to receive digital stations, a Conditional Access module (CA module) and a Smart Card must be inserted in the CI slot of your TV set (see pages 5 and 6). The CA module and the Smart Card are not part of the TV set's scope of delivery. Th...

35 - Select software type: Select TV base software or DVB software , OK start search. The following on-screen message appears if new versions are available. Loading new software ž New software available via search. ž If both a new TV and a new DVB software are available in the automatic search for n...

- 36 Radio Radio mode You can only receive radio stations via DVB. If you do not have DVB radio reception then you can play audio from an external device via the TV set using the audio/AV inputs . ž For TV sets with MHEG-5 software, the buttons may be configured differently by the provider. Radio mo...

37 - Yellow button: Place a check mark after the devices to be connected. OK Proceed . The connection plan is displayed again. Connect the devices to the back of the TV set (in this example the DVD player ( DVD ) to AV1 , the DVD recorder ( DVD• ) to AV2 ). Select the signal type of your set. Leave ...

39 - Operating additional equipment Connecting devices to the HDMI (DVI) connections and playback The HDMI connections (High Definition Multimedia In- terface) permit digital video and audio transmission via a connection cable from a player, e.g. from the Loewe ViewVision DVD recorder. The digital p...

41 - Operating additional equipment Sound components wizard The sound components wizard helps you to configure the components used to play the TV sound. The TV speakers alone or with active subwoofer, active speakers, analogue or digital HiFi/AV amplifier or the Loewe Sound Projector can be configur...

- 42 Connecting audio amplifiers The sound component wizard permits configuration of different audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM). See the operating manual for the audio amplif...

43 - Assignment of the digital audio input In order to be able to hear the digital sound of an external device con-nected to an AV input, an AV input can be assigned to the digital audio input socket AUDIO DIGITAL IN . When switching to this AV input, the digital audio signal applied to the AUDIO DI...

- 44 Operating additional equipment The direct way to record You can programme timer recordings for Digital Recorder or connected recorders available according to the equipment on the TV set. The record- ing wizard is integrated at several places for programming a recording. You will find further in...

45 - Operating additional equipment Programming the timer with the timer overview A timer recording can also be programmed manually. Call Timer list . You see a list of all previously programmed timers: Green button: Change timer recording. Yellow button: Delete timer recording. Red button: New time...

- 46 PhotoViewer You can look at photos in standard JPEG format which are saved on a USB stick or a memory card in a card reader. You can also collect photos in a slide show. Connecting ž Certain USB memory media may not be supported by this set under some circumstances. Plug a card reader (via a US...

49 - Operating additional equipment Functions of the control buttons ž Title is played. STOP button: once: resume stop, twice: stop. Play button: After resume stop: continue playing at place where playback was interrupted.After stop: start playing the first title according to the set sorting.For pla...

- 50 Operating additional equipment MusicBox – Play lists You can save and call your music titles in play lists. Change and create play lists as you like.The play lists are created on the memory medium in the common M3U format for simple exchange with the PC. Call / play play list ž The MusicBox lis...

- 52 Operating Loewe equipment Using the remote control for the TV mode of the TV set Press the TV button, the display above it will light for approx. 5 seconds. Using the remote control for a recorder Press the REC button, the display above it will light for approx. 5 seconds. Using the remote cont...

- 54 Rotating the TV set (upgradable interface) Your TV set can be upgraded with the connection for a rotating foot control. If the set is assembled with a Loewe stand with motor drive, you can align it to suit your sitting position using the remote control. ž A motor unit is connected. ž In normal ...

55 - Troubleshooting Problem Possible cause Remedy All menus are displayed in the wrong language . The menu language was set incorrectly. Set the menu language: Press the INFO button in TV mode ( Index ). Mark the first key word and call it with OK . Then select the language and confirm it with OK ....

57 - Technical data Jack 3.5 mm: ........................................................ Headphones 32-2000 ohm Mini-DIN (AVS) Video IN: ...........................................................Y/C (S-VHS/Hi 8) ........................................................CVBS (VHS/8 mm) Cinch (yellow)...

- 58 Setup possibilities Connect 42 Table Stand (delivery status) delivery status)) Wall Mount WM 54Floor Stand 4 (1 Floor Stand 5 MU (1 (2 Floor Stand Trapeze C42 Connect 37 Table Stand (delivery status) delivery status)) Wall Mount WM 54Floor Stand 4 (1 Floor Stand 5 MU (1 (2 Floor Stand Trapeze C...

59 - z ex factory { available as a upgrade kit – not available Accessories Equipment variants and upgrade kits Upgrade kit Digital Single Satellite Tuner (Art.No. 89565.081): You can receive digital satellite and HDTV stations with the upgrade kit. The tuner is integrated in the TV set and is operat...

- 60 Glossary 0-924p movie display: Modern movie makers produce movies with 24 (full) pictures per second (24p), conventional TV sets (and most DVDs) show 50 (half) pictures per second. To play the movie, the original number of pictures is doubled and the film sped up. This is optimal for sports bro...

63 - Index 0-9 24p format 39 A Adjusting the picture 21 Adjusting the sound 20 Alarm 17 Assist+ 8, 16 Audio adjustment 20 Audio ampli fi ers 42 Auro Loewe Preceiver 41 Auto format 21 Automatic dimmer 21 AV audio signal 20 AV selection 19 B Batteries 11 Brightness 21 Button functions 22 C CA module 3...

64 Loewe Austria GmbH Parkring 12 1010 Wien, Österreich Tel +43 - 1 22 88 633 - 0 Fax +43 - 1 22 88 633 - 90 Email [email protected] International Dynamics Australasia Pty Ltd. 129 Palmer Street Richmond 3121, Victoria, Australia Tel +61 - 3 - 94 29 08 22 Fax +61 - 3 - 94 29 08 33 Email mail@interna...