Linn BASIK - Manuals

OPERATION The power switch is on the underside of the plinth at the front left-hand side. A label indicates direction forON and OFF. This label is removable. Lift and lower the lid carefully as it is coupled to the suspended plinth. If dropped or roughly handled it maycause the arm to jump. NOTE You...

SPEED SELECTION To change the speed of the BASIK turntable, switch off, remove the mat and outer platter and move the belt tothe other level on the stepped pulley. The larger diameter will give 45rpm, the smaller will give 33rpm. If changing to 45rpm it is advisable to start up the motor with only t...

TURNTABLE MAINTENANCE The BASIK is designed for a long operational life. To preserve the appearance and maintain the performance ofyour dock, you should note the following points: OUTER PLATTER Clean with a soft, dry cloth. DO NOT use any abrasive cleaner as this will remove the protective lacquer a...

GENERAL SYSTEM INSTALLATION TRACKING WEIGHT & BIAS Every arm and cartridge combination has an optimum tracking weight which your dealer will have advised you of. RECORD CLEANING Most record cleaning devices do more harm than good. The best method of cleaning records is to lot the stylusremove an...

GUARANTEE The unit is guaranteed under the conditions that apply in the country of purchase. Unauthorised servicing or dismantling of this turntable will invalidate the manufacturer's warranty. If you arein any doubt, please contact your nearest Linn dealer. In addition to any statutory rights the c...