Linksys SGE2010P - Manuals

SGE2010/SGE2010P Administration Guide 4 Sample Network Configuration Connecting Devices to the SGE2010/SGE2010P 3 Connecting Devices to the SGE2010/SGE2010P This chapter explains how to physically connect your network devices to the switch. • ”Sample Network Configuration,” on page 4 • ”Maximum Cabl...

SGE2010/SGE2010P Administration Guide 5 Before You Install the Switch... Connecting Devices to the SGE2010/SGE2010P Before You Install the Switch... When you choose a location for the switch, observe the following guidelines: • Make sure that the switch will be accessible and that the cables can be ...

SGE2010/SGE2010P Administration Guide 7 Connecting the Cables Connecting Devices to the SGE2010/SGE2010P Wall-Mount Placement 1. On one of the side corners, remove the four front screws on of the Ethernet switch. Retain the screws for re-installation. NOTE: The Ethernet switch, shown below, is mount...

SGE2010/SGE2010P Administration Guide 9 Connecting to Your Switch with HyperTerminal Using the Console 4 Using the Console This chapter describes the use of the switch console, which allows you to perform basic configuration of the switch. The switch features a menu-driven console interface for basi...

SGE2010/SGE2010P Administration Guide 10 Connecting to Your Switch with HyperTerminal Using the Console 1. Click the Start button. Choose Programs > Accessories > Communications > HyperTerminal . 2. On the Connection Description screen, type a name for this connection, select an icon, and t...

SGE2010/SGE2010P Administration Guide 12 Connecting to the Switch with Telnet Using the Console Connecting to the Switch with Telnet You can connect to the switch with telnet. 1. Open a command line editor and enter telnet <switch ip address> . Then, press the Enter key. 2. When the Login scre...

SGE2010/SGE2010P Administration Guide 13 Using the Switch Main Menu Using the Console Using the Switch Main Menu The Switch Main Menu provides access to screens that you can use to configure your system, view or modify port and PoE settings, and view or modify system and stacking mode. 1. System Con...

SGE2010/SGE2010P Administration Guide 14 System Configuration Using the Console 3. Username & Password Settings (see page 21) 4. Security Settings (see page 22) 5. VLAN Management (see page 25) 6. IP Configuration (see page 26) 7. File Management (see page 40) 8. Restore System Default Settings ...

SGE2010/SGE2010P Administration Guide 15 System Configuration Using the Console Versions Use the Versions screen to display the boot, software, and hardware firmware versions of the Ethernet switch. In stacking mode, this information is displayed for the stack master. To open this screen: 1. From th...

SGE2010/SGE2010P Administration Guide 16 System Configuration Using the Console To change the system contact, system name, and location: 1. Select Edit , and then make your changes. Press the Tab key to move the cursor from one field to the next. 2. Press the Esc key to return to the Action list. 3....

SGE2010/SGE2010P Administration Guide 17 System Configuration Using the Console Serial Port Configuration Use the Serial Port Configuration screen to view or change the baud rate of the Ethernet switch. To open this screen: 1. From the Switch Main Menu , select 1. System Configuration Menu . 2. From...

SGE2010/SGE2010P Administration Guide 18 System Configuration Using the Console To open this screen: 1. From the Switch Main Menu , select 1. System Configuration Menu . 2. From the System Configuration Menu , select 2. Management Settings . 3. From the Management Settings Menu , choose 2. Telnet Co...

SGE2010/SGE2010P Administration Guide 21 System Configuration Using the Console To generate the crypto key: 1. Verify that the information is correct. 2. Select Execute . 3. When the Operation complete message appears, press the Esc key to move the cursor to the Action list. SSH Keys Fingerprints Us...

SGE2010/SGE2010P Administration Guide 22 System Configuration Using the Console NOTE: The default user is “admin” with no password. To open this screen: 1. From the Switch Main Menu , select 1. System Configuration . 2. From the System Configuration Menu , select 3. Username & Password Settings ...

SGE2010/SGE2010P Administration Guide 23 System Configuration Using the Console SSL Generate Certificate Use the SSL Certificate Generation screen to view, edit, and execute device-generated certificates. To open this screen: 1. From the Switch Main Menu, select 1. System Configuration . 2. From the...

SGE2010/SGE2010P Administration Guide 24 System Configuration Using the Console Show Certificate Use the Show Certificate screen to display the internal certificate. To open this screen: 1. From the Switch Main Menu , select 1. System Configuration . 2. From the System Configuration Menu , select 4....

SGE2010/SGE2010P Administration Guide 25 System Configuration Using the Console VLAN Management The VLAN Management menu provides access to a screen where you can view or modify the default VLAN ID. 1. Default VLAN Setup (see page 25) 0.Back (Select to return to the previous menu.) To open this scre...

SGE2010/SGE2010P Administration Guide 26 System Configuration Using the Console To edit the VLAN ID: 1. Select Edit . 2. Type the VLAN ID. 3. Press the Esc key to move the cursor to the Action list. 4. Select Execute . 5. When the Operation complete message appears, press the Esc key to move the cur...

SGE2010/SGE2010P Administration Guide 27 System Configuration Using the Console IPv4 Address Configuration The IPv4 Configuration menu provides access to the IPv4 address settings and DHCP renew. 1. IPv4 Address Settings (see page 27) 2. DHCP Renew (see page 28) 0.Back (Select to return to the previ...

SGE2010/SGE2010P Administration Guide 28 System Configuration Using the Console 4. From the IPv4 Address Configuration menu, select 1. IPv4 Address Settings . To edit the IPv4 address settings: 1. Select Edit ., and then make the changes. Press the Tab key to move the cursor from one field to the ne...

SGE2010/SGE2010P Administration Guide 32 System Configuration Using the Console To edit the ISATAP tunnel settings 1. Select Edit ., and then make the changes. Press the Tab key to move the cursor from one field to the next. NOTE: To enable or disable the ISATAP tunnel, move the cursor to the Status...

SGE2010/SGE2010P Administration Guide 34 System Configuration Using the Console HTTP Configuration You can use the HTTP screen to view and edit the HTTP settings.You can enable or disable the HTTP server and configure the port on which the session is enabled. To open the screen: 1. From the Switch M...

SGE2010/SGE2010P Administration Guide 35 System Configuration Using the Console To open the screen: 1. From the Switch Main Menu , select 1. System Configuration . 2. From the System Configuration Menu , select 6. IP Configuration . 3. From the IP Configuration menu, select 4. HTTPS Configuration . ...

SGE2010/SGE2010P Administration Guide 40 System Configuration Using the Console File Management The File Management Menu provides access to screens where you can download upgrade files from an IPv4 or IPv6 address. 1. Upgrade / Backup IPv4 (see page 40) 2. Upgrade / Backup IPv6 (see page 41) 3. Acti...

SGE2010/SGE2010P Administration Guide 41 System Configuration Using the Console To enter the IPv4 Upgrade/Backup file name and location: 1. Select Edit , and then make the changes. Press the Tab key to move the cursor from one field to the next. NOTE: Specify the source and destination of the file, ...

SGE2010/SGE2010P Administration Guide 42 System Configuration Using the Console To download a file from the specified location: 3. Verify that the file name and location are correct. 4. Select Execute . 5. When the Operation complete message appears, press the Esc key to move the cursor to the Actio...

SGE2010/SGE2010P Administration Guide 43 System Configuration Using the Console Restore System Default Settings You can restore the switch to the system default settings. To restore system default settings 1. From the Switch Main Menu , select 1. System Configuration . 2. From the System Configurati...

SGE2010/SGE2010P Administration Guide 44 Port Status Using the Console Stack Configuration You can use the Stack Configuration screen to specify the Stack ID for the Ethernet switch. By default, ID numbers are automatically assigned to each device. To open this screen: 1. From the Switch Main Menu ,...

SGE2010/SGE2010P Administration Guide 45 Port Status Using the Console Port Status You can use the Port Status screen to view the port connection status. You can use the up or down arrow keys to scroll through all the ports on the switch. NOTE: To configure ports, use the Port Configuration screen. ...

SGE2010/SGE2010P Administration Guide 46 Port Configuration Using the Console Port Configuration The Port Configuration Menu provides access to screens where you can view or modify port settings and PoE settings. 1. Port Settings (see page 46) 2. PoE Settings (see page 47) 0.Back (Select to return t...

SGE2010/SGE2010P Administration Guide 47 Port Configuration Using the Console To configure the ports: 1. Select Edit . 2. Proceed as needed: a. Press the down arrow key to scroll down through the list of ports. b. Press the right arrow key to move the cursor from one field to the next within a row. ...

SGE2010/SGE2010P Administration Guide 49 Help Using the Console To edit the system mode or stacking mode: 1. Select Edit . 2. Proceed as needed: a. Press the down arrow key to scroll down through the list of ports. b. Press the Tab key to move the cursor from one field to the next. c. To change a se...

SGE2010/SGE2010P Administration Guide 50 Logout Using the Console Logout The Logout command lets you logout from the Ethernet switch. NOTE: When you issue this command, you are immediately logged off the Ethernet switch.

SGE2010/SGE2010P Administration Guide 51 Connecting to the Switch with the Web-Based Utility Web Utility Configuration 5 Web Utility Configuration This chapter provides an introduction to the features of the web-based configuration utility. Linksys switch provides a complete web-based utility to con...

SGE2010/SGE2010P Administration Guide 52 Viewing On-line Help Web Utility Configuration Viewing On-line Help The Web Utility has on-line Help including field definitions for each screen. To access the on-line help for a particular screen, click the Help button on the right side of the screen.

SGE2010/SGE2010P Administration Guide 53 US/Canada Contacts A Contacts For additional information or troubleshooting help, refer to the User Guide on the CD-ROM. Additional support is also available by phone or online. US/Canada Contacts • 24-Hour Technical Support: 800-326-7114 • RMA (Return Mercha...

SGE2010/SGE2010P Administration Guide 54 B Customer Site Survey Use this Customer Site Survey to gather customer contact information and other information about the customer site that will be needed for the implementation and installation of the Linksys Solution. Site Business Address Business Name ...

SGE2010/SGE2010P Administration Guide 56 Limited Warranty C Warranty Information Limited Warranty Linksys warrants this Linksys hardware product against defects in materials and workmanship under normal use for the Warranty Period, which begins on the date of purchase by the original end-user purcha...

SGE2010/SGE2010P Administration Guide 57 Obtaining Warranty Service TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING ...

SGE2010/SGE2010P Administration Guide 58 D Federal Communication Commission Interference Statement This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against...

SGE2010/SGE2010P Administration Guide 59 E Specifications Model • SGE2010 48-port 10/100/1000 Ethernet Switch • SGE2010P 48-port 10/100/1000 Ethernet Switch with PoE • IEEE 802.3af PoE on delivered over any of the 48 10/100 ports • Power budget allows for max power of 15.4W to an Ethernet port, with...