Page 2 - Copyright and Trademarks
ADSL Modem Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and pro...
Page 3 - Table of Contents
ADSL Modem Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in this Guide? 2 Chapter 2: Getting to Know the ADSL Modem 3 The Back Panel 3 The Front Panel 4 Chapter 3: Setting Up and Connecting the ADSL Modem 5 Overview 5 Wall-Mount Option 5 Connecting the Modem 5 Chapter 4: Configuring t...
Page 4 - List of Figures
ADSL Modem List of Figures Figure 2-1: Back Panel 3 Figure 2-2: Front Panel 4 Figure 3-1: Wall-Mount Option 5 Figure 3-2: DSL Connection 5 Figure 3-3: Ethernet Connection 6 Figure 3-4: Power Connection 6 Figure 4-1: Password Screen 9 Figure 4-2: Basic Setup Tab 9 Figure 4-3: Dynamic IP 10 Figure 4-4...
Page 6 - Chapter 1: Introduction; Welcome
1 Chapter 1: IntroductionWelcome ADSL Modem Chapter 1: Introduction Welcome Thank you for choosing the ADSL Modem. The Linksys ADSL Modem gives you an instant, high-speed connection to the Internet. ADSL technology lets you access the Internet using your existing phone lines, without interfering wit...
Page 7 - What’s in this Guide?
2 Chapter 1: IntroductionWhat’s in this Guide? ADSL Modem What’s in this Guide? This user guide covers the steps for setting up and using the ADSL Modem. • Chapter 1: IntroductionThis chapter describes the ADSL Modem applications and this User Guide. • Chapter 2: Getting to Know the ADSL ModemThis c...
Page 8 - Chapter 2: Getting to Know the ADSL Modem; The Back Panel
3 Chapter 2: Getting to Know the ADSL ModemThe Back Panel ADSL Modem Chapter 2: Getting to Know the ADSL Modem The Back Panel The Modem’s ports, where cables are connected, are located on the back panel. The Modem’s reset button is also located on the back panel. DSL The DSL port connects to the DSL...
Page 9 - The Front Panel
4 Chapter 2: Getting to Know the ADSL ModemThe Front Panel ADSL Modem The Front Panel The Modem's LEDs, where information about network activity is displayed, are located on the front panel. Power Green. The Power LED lights up when the Modem is powered on. Ethernet Green. The Ethernet LED serves tw...
Page 10 - Chapter 3: Setting Up and Connecting the ADSL Modem; Overview; Connecting the Modem
5 Chapter 3: Setting Up and Connecting the ADSL ModemOverview ADSL Modem 101.6 mm (4 inches) Chapter 3: Setting Up and Connecting the ADSL Modem Overview In thi s chapter, you will connect the Modem to your DSL line and to a computer in your home or bu s ine ss . It i s not nece ss ary to mount your...
Page 12 - Chapter 4: Configuring the ADSL Modem; Setup
7 Chapter 4: Configuring the ADSL ModemOverview ADSL Modem Chapter 4: Configuring the ADSL Modem Overview Follow the steps in this chapter and use the Modem’s web-based utility to configure the Modem. This chapter will describe each web page in the Utility and each page’s key functions. The utility ...
Page 13 - Status
8 Chapter 4: Configuring the ADSL ModemOverview ADSL Modem • Port Triggering. To set up triggered ranges and forwarded ranges for Internet applications, click this tab. • NAT Mapping Table. This table displays the current NAPT address mappings. • DMZ. To allow one local user to be exposed to the Int...
Page 14 - How to Access the Web-based Utility; Internet Setup
9 Chapter 4: Configuring the ADSL ModemHow to Access the Web-based Utility ADSL Modem How to Access the Web-based Utility To access the web-based utility, launch Internet Explorer or Netscape Navigator, and enter the Modem’s default IP address, 192.168.1.1, in the Address field. Then press Enter. A ...
Page 18 - DDNS
13 Chapter 4: Configuring the ADSL ModemThe Setup Tab ADSL Modem Time Setup • Set Time Zone. Select the appropriate time zone for the Modem’s location. If appropriate, check the Automatically adjust clock for daylight saving changes checkbox. • Configure Time Server (NTP). When the Automatic Time Se...
Page 19 - Advanced Routing
14 Chapter 4: Configuring the ADSL ModemThe Setup Tab ADSL Modem When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes. Advanced Routing The Advanced Routing screen allows you to configure the dyna...
Page 20 - The Security Tab; Firewall; Access Control
15 Chapter 4: Configuring the ADSL ModemThe Security Tab ADSL Modem The Security Tab Firewall When you click the Security tab, you will see the Firewall screen. You can add Firewall Protection and Filter Multicast. • Firewall Protection. To add Firewall Protection, click Enabled. If you do not want ...
Page 21 - Schedule Rule
16 Chapter 4: Configuring the ADSL ModemThe Security Tab ADSL Modem Schedule Rule To set time periods for filtering or access, click Add Schedule Rule . The Schedule Rule Table displays these scheduling rules. • Name/Comment. Choose a name for the rule (example: NoSurfingAfter10PM) and enter it in t...
Page 22 - URL Blocking; Intrusion Detection; VPN
17 Chapter 4: Configuring the ADSL ModemThe Security Tab ADSL Modem URL Blocking This screen allows the user to block access to certain web sites from a particular PC by entering either a full URL address or just a keyword of the web site. If you want to remove all the URLs and Keywords from the lis...
Page 23 - The Applications and Gaming Tab; Port Range Forwarding
18 Chapter 4: Configuring the ADSL ModemThe Applications and Gaming Tab ADSL Modem • IPSec Passthrough. Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP layer. To allow IPSec Passthrough, click the Enabled option. To disable IPSec Pass...
Page 24 - Port Triggering
19 Chapter 4: Configuring the ADSL ModemThe Applications and Gaming Tab ADSL Modem When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes. Port Triggering Port Triggering is used for special applica...
Page 25 - The Administration Tab; SNMP
20 Chapter 4: Configuring the ADSL ModemThe Administration Tab ADSL Modem When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes. The Administration Tab Management This section of the Administration...
Page 27 - Diagnostics
22 Chapter 4: Configuring the ADSL ModemThe Administration Tab ADSL Modem Diagnostics The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network components. Ping Test . The Ping test will check the status of a connection. Click the Ping button to open the Ping Test...
Page 28 - Firmware Upgrade
23 Chapter 4: Configuring the ADSL ModemThe Administration Tab ADSL Modem Firmware Upgrade Firmware can be upgraded by clicking the Upgrade button after browsing for the firmware, which you can download from the Linksys website. Do not upgrade your firmware unless you are experiencing problems with ...
Page 29 - The Status Tab; Modem; Local Network
24 Chapter 4: Configuring the ADSL ModemThe Status Tab ADSL Modem The Status Tab Modem This screen displays information about your Modem and its Internet connection. Modem Information Modem Information displays the Software Version, ADSL Version, Boot Code Version, and MAC Address. DSL Status The DS...
Page 30 - Appendix A: Troubleshooting; Common Problems and Solutions
25 Appendix A: TroubleshootingCommon Problems and Solutions ADSL Modem Appendix A: Troubleshooting This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” Provided are possible solutions to problems that may occur during the installation and operation o...
Page 33 - Frequently Asked Questions
28 Appendix A: TroubleshootingFrequently Asked Questions ADSL Modem 7. The Power LED flashes continuously. The Power LED lights up when the device is first powered up. In the meantime, the system will boot up itself and check for proper operation. After finishing the checking procedure, the LED rema...
Page 35 - Appendix B: Upgrading Firmware
30 Appendix B: Upgrading Firmware ADSL Modem Appendix B: Upgrading Firmware The ADSL Modem allows you to upgrade firmware for the Modem through the Web-Utility's Firmware Upgrade tab from the Administration tab. Follow these instructions:. Firmware Upgrade 1. Click the Browse button to find the firm...
Page 41 - Appendix D: Specifications
36 Appendix D: Specifications ADSL Modem Appendix D: Specifications Standards IEEE 802.3, IEEE 802.3u, G.992.1 (G.dmt), G.992.2 (G.lite), G.922.3, G.992.5, T1.413i2 Ports Power, DSL, Ethernet Buttons Reset Cabling Type UTP CAT 5 or better, Phone Cable (RJ-11) LEDs Power, Ethernet, DSL, Internet Dime...
Page 42 - Appendix E: Warranty Information
37 Appendix E: Warranty Information ADSL Modem Appendix E: Warranty Information Linksys warrants to You that, for a period of two years (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys...
Page 43 - Appendix F: Regulatory Information
38 Appendix F: Regulatory Information ADSL Modem Appendix F: Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against h...
Page 49 - Appendix G: Contact Information
44 ADSL Modem Appendix G: Contact Information Appendix G: Contact Information Need to contact Linksys?Visit us online for information on the latest products and updates to your existing products at:http://www.linksys.com/international If you experience problems with any Linksys product, you can e-ma...