Lindy 42803 - Manuals

Configuration Initial Operation To use the MiniCam, you must launch the AMCap application. Select: The lower part of the drop-down menu allows you to select the audio input device. Ensure that ‘USB Camera’ is ticked. If you don’t see anything in the AMCap window, ensure that ‘USB PC Camera with Mic’...

Configuration Setting up the microphone For correct microphone operation you must follow the procedure below. Open the windows Sound Recorder application: Start > Control Panel > Sounds and Audio Devices 1. Click on the Audio tab; make sure that USB Camera is set as the default sound recording...

Configuration Video Capture Pin To change video compression, output size and frame rate settings, select Video Capture Pin… from the Options menu. Select the Color Space / Compression setting here, you can choose from ‘RGB 24’ or ‘I420’. The RGB 24 setting allows a higher display output to be select...

Configuration Video Capture Filter The Video Capture Filter menus allow you to change various settings and apply special effects. To open, select Video Capture Filter... from the Options menu and click the Settings tab. Here you can change the settings for indoor / outdoor operation, refresh rates (...

Configuration Click the Zoom tab to use the digital zoom and pan controls. up, down, left and right Use the arrows to pan Move the slider up to zoom in and down to zoom out Tick the check box to enable the zoom controls

Recording & Capture Creating a Capture File Before capturing video and audio, you should create a capture file. 1. Select File > Set Capture File... Choose a name and location for the capture file. Be sure to add the .avi extension to the file name. As an example you could name the file: Capt...

Recording & Capture Capturing Video & Audio 1. If you want to capture audio as well as video, ensure that Capture Audio is ticked under the Capture menu. 2. Select Capture > Start Capture and click OK or press the Enter key. 3. To stop capture, press the Esc key or click Capture > Stop...

Recording & Capture Snapshot Function 1. Press the button on the side of the MiniCam to take a photo snapshot. 2. A new window will appear showing the photo. Click on the Rotate menus to rotate the image in various ways; select File > Save As... to save the image. Press this button to take a ...

Recording & Capture Using the MiniCam with NetMeeting Note: For more information about installing and using NetMeeting on your PC, please use Windows Help. Click to place a call to the computer identified in the IP address field. Type the IP address of the computer you want to contact in this bo...