Lifebreath TFP3000HEPA - Manuals

Lifebreath TFP3000HEPA – Manual in PDF format online.

Manuals:

Manual Lifebreath TFP3000HEPA

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Lift the TFP into position.; Edge of TFP must be; TYPE 1 INSTALLATION; TFP; Figure 1; Figure 2

2 TFP Directly Connected to Forced Air Heating System 1. Install 7” port collar (provided) on top and bottom of TFP (Fig. 1). Use (4) 8/32” X 3/8”screws (provided). 2. Remove protective backing from pieces offoam and stick them to the 4 corners of the TFPon the side being mounted against the plenum....

Page 3 - TFP Connected to Heat Recovery Ventilator; LOCATION; F L O O R J O I S T S; TYPE 2 INSTALLATION; Figure 3; CAUTION

TFP Connected to Heat Recovery Ventilator LOCATION The TFP should be located in the main trunk of the fresh air to house line, after the Heat Recovery Ventilator (HRV) and before any branch lines. (Fig. 3) MOUNTING 1. Locate mounting bolts (4) on side of TFP cabinet for vertical hanging (Fig. 3) and...

Page 4 - Refer to “Mounting” under Type 2 Installations.; TYPE 3 INSTALLATION

TFP Independent Installation No HRV, Radiant Heating System LOCATION 1. A TFP is usually installed in a basement area where air flow noise will be negligible to the occupants. 2. A central location between the clean air supplygrille and return grille is recommended. MOUNTING Refer to “Mounting” unde...

Lifebreath Manuals