Page 2 - Contents; ment; Appliance range of use; Appliance at a glance
Contents 1 Appliance at a glance............................................ 2 1.1 Description of appliance and equipment.................. 2 1.2 Appliance range of use............................................. 2 1.3 Conformity................................................................ 3 1.4...
Page 3 - ance; General safety information
Misusing the appliance may lead to damage to the goods stored or they may spoil.Climate classificationsDepending on the climate classification the appliance is designed to operate in restricted ambient temperatures. The climate classifica- tion applying to your appliance is printed on the rating pla...
Page 4 - Operating and control elements; Controls and displays
- Please keep these instructions in a safe place and pass them on to any subsequent owners. - Special-purpose lamps (incandescent lamps, LEDs, fluorescent tubes) in the appliance serve to illuminate the appliance interior and are not suited for room illumination. Fire hazard: - The refrigerant R 600...
Page 5 - Transporting the appliance; Putting into operation
4 Putting into operation 4.1 Transporting the appliance CAUTION Risk of injury and danger of damage as a result of incorrect transport! u Transport the appliance in a packed condition. u Transport the appliance upright. u Do not transport the appliance without assistance. 4.2 Installing the applianc...
Page 6 - Changing over the door hinges
4.3 Changing over the door hinges You can change over the door hinges if necessary. NOTICE Risk of damage to side-by-side appliances due to condensa- tion! When a side-by-side appliance (S…) is fitted together with a second appliance (as a SBS combination), the door hinges must remain as delivered. ...
Page 7 - Insertion into a row of kitchen units
Fig. 7 u Lift the stopper (33) out of the door bearing bush and transfer it. u Dismantle the door handle (32), stoppers (33) and pressure plates* (34) and transfer to the opposite side. u When fitting the pressure plates on the opposite side, make sure they snap properly into place.* 4.3.4 Fitting t...
Page 8 - Connecting the appliance; Switching on the appliance; Brightness of the temperature; Control
4.6 Connecting the appliance NOTICE Failure to connect properly Damage to the electronics. u Do not use a standalone inverter. u Do not use an energy saving plug. WARNING Failure to connect properly Fire. u Do not use an extension cable. u Do not use distributor blocks. The type of current (alternat...
Page 9 - Food refrigeration; Setting the temperature; To prematurely deactivate SuperCool
5.5 Food refrigeration Note The energy consumption increases and the cooling perform- ance decreases if the ventilation is inadequate. u Always keep the air slits of the fan free. u Store perishable food such as ready-to-serve dishes, meat products and sausages in the coldest zone. Place butter and ...
Page 10 - Cleaning the appliance; Maintenance
5.10 Using the sectioned shelf Fig. 11 u The glass shelf with stop face (2) has to be at the back. 5.11 Door racks 5.11.1 Moving the storage rack Fig. 12 5.11.2 Dismantling door racks Fig. 13 u The door racks can be dismantled for cleaning. 5.12 Using the bottle holder u To avoid the bottles tipping...
Page 11 - Customer service; Malfunctions
NOTICE Risk of damage from stainless steel care products! The stainless steel doors and stainless steel side panels are treated with a premium surface finish. Stainless steel care products attack these surfaces. u Only use a soft, clean cloth to wipe down finished door and side panel surfaces and pa...
Page 12 - Switching off the appliance; Disposing of the appliance; Decommissioning
The outer surfaces of the appliance are warm*. → The heat of the refrigeration circuit is used to prevent condensate from forming. u This is normal. The temperature is not cold enough. → The door of the appliance is not properly closed. u Close the door of the appliance. → Insufficient ventilation. ...
Page 13 - Disposing of the appliance
Disposing of the appliance * Depending on model and options 13