Liebherr ICNH5123RH - Manuals

NOTICE identifies a dangerous situation which, if not obviated, may result in damage to property. Note It contains useful instructions and tips. 3 Putting into operation 3.1 Switching on appliance Ensure that the following conditions are met: q Appliance is installed and connected according to insta...

Before freezing goods, please make sure of the following: q SuperFrost is activated (see 6.3 Functions) when the amount of food to freeze exceeds approx. 2 kg. q With a small amount to freeze: SuperFrost is on for about 6 hours beforehand. q With a maximum amount to freeze: SuperFrost is on for abou...

Confirm Fig. 5 (2): - Activating/deactivating a function. - Open a submenu. - Confirm a selection. After confirmation the display switches back to the menu. Back to Status display: in the fastest manner: - Close and open the door. - or wait 10 seconds. The display switches to the Status display. 6.1...

u Tap the navigation arrows Fig. 5 (1) repeatedly until the func- tion is displayed. u Press Confirm Fig. 5 (2). u Select the setting value with the navigation arrows Fig. 5 (1). Setting the temperature u Press Confirm Fig. 5 (2). w You hear the confirmation tone. w Status: On Fig. 6 (1) appears bri...

E-Saver This function reduces energy consumption. If you activate this function, the cooling temperature increases. Temperature zone Recommended setting (see Temperature) Temperature when E-Saver activated Fridge compart- ment 5 °C 7 °C Freezer compart- ment -18 °C -16 °C Use: - Save energy. Activat...

Fig. 10 w There is no connection: The symbol is displayed constantly. Restoring the connection u Restore settings (see 6.2 Control concept) . Fig. 11 w Connection and other settings are restored to factory settings. Entry lock This setting prevents unintentional use of the appliance, e.g. by childre...

Turn off appliance This setting turns off the whole appliance.Switching off the entire appliance Fig. 12 u Turning off the IceMaker .* u Activating/deactivating (see 6.2 Control concept) . w Off: Display goes black. 6.5 Warnings Warnings are issued with an acoustic signal and visually with a symbol ...

Fig. 21 u Remove the drawer. u Slide back at the height you want Fig. 21 (1) or Fig. 21 (2). 7.4.2 Repositioning the VarioSafe You can shift the height of the entire VarioSafe. Fig. 22 u Pull forwards. w Line up the side runner. u Lift or lower to the height you want. u Slide to the rear. 7.4.3 Remo...

7.7.1 Removing the compartment cover Fig. 36 When the drawers are removed: u Pull the lid up at the front to the opening in the retaining parts Fig. 36 (1). u Lift from the back and pull it up and out Fig. 36 (2). 7.7.2 Inserting the compartment cover Fig. 37 If the text THIS SIDE UP points upwards:...

7.9.2 Producing ice cubes The volume depends on the freezing temperature. The colder the temperature, the more ice cubes the system can produce in a certain time period.After the IceMaker is turned on for the first time, it can take up to 24 hours for the first ice cubes to be made. u Activate the I...

u Clean the drain opening regularly (see 8.3 Cleaning the appliance) . 8.2.2 Defrosting the freezer compartment with NoFrost Defrosting is performed automatically with the NoFrost system. The moisture is deposited on the evaporator, is periodically defrosted and evaporates.The appliance does not nee...

8.3.4 Clean the components NOTICE Improper cleaning! Damage to the appliance. u Only use soft cleaning cloths and ph-neutral all-purpose cleaners. Clean with a soft, clean cloth, lukewarm water and some detergent:- Door rack - Shelf - Dividing shelf* - VarioSafe* - EasyFresh-Safe cover - Drawer Plea...

9.2 Operating noises The appliance makes different noises when it is on. - At higher temperatures the appliance uses less energy but works for longer. It is quieter. - At lower temperatures the food is cooled faster. It is louder.Examples: • Functions on (see 6.3 Functions) • Fan running • Food rece...

Defect Cause Remedy → The appliance was not correctly installed in the recess. u Check if the appliance was installed correctly and that the door closes properly. The door seal is defective or needs to be replaced for another reason. → The door seal can be replaced. It can be replaced without the ne...

Fig. 47 (1) Appliance description (3) Serial no. (2) Service no. u Note the data on the model plate. 10 Shutting down u Empty the appliance. u Turn off the IceMaker .* u Turn off the appliance (see 6.4 Settings) . u Remove mains connector. u Remove appliance connector if required: Remove and move fr...

home.liebherr.com/fridge-manuals Integrated fridge/freezer Issue date: 20220111 Part number index: 7088280-00 Liebherr-Hausgeräte Ochsenhausen GmbH Memminger Straße 77-79 88416 Ochsenhausen Deutschland