Liebherr ECBN 6156 - Manuals

Page 2 - Disposal notes; WARNING; Safety instructions and warnings

Disposal notes The appliance contains reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws. When di...

Page 3 - Description of the appliance; bm; Never cover this grille or otherwise obstruct the air flow!; Temperature and control display; touch capacitance

GB Description of the appliance 1 Operating and control elements 2 Adjustable door racks 3 Adjustable storage shelves 4 Bottle racks 5 Type plate (behind the vegetable drawer on the left-hand side) 6 Vegetable drawers 7 Water filter 8 Upper freezer drawer 9 Lower freezer drawer bl IceMaker (in the i...

Page 4 - Setup mode; To avoid the risk of bacteria growth, the water filter; The appliance is suitable solely for cooling food in; Water filter

Replace the filter when the waterdrop symbol appears in the temperature display. Filters can be obtained from your dealer.The drop symbol must be cancelled after the filter has been changed. For detailed instructions see section entitled " Setup mode ". Water filter Before switching on the a...

Page 5 - To reduce the temperature:; Installing the water filter

GB Switching the appliance on and off You are advised to clean the appliance before switching it on for the first time (see "Cleaning" ). Do not load with frozen food until the temperature shows at least -18°C. The refrigerator and freezer compartments can be oper - ated separately. Switchin...

Page 6 - Audible door alarm; SuperCool; Activating setup mode

Power failure/FrostControl display If the LED comes on on the control panel, this means that the freezer temperature has risen too high during the last few hours or days due to a power failure. If you touch the ALARM icon now, the highest temperature registered during the power failure will be displ...

Page 8 - Lower hinge heating control; Changing the heating output; Display brightness; Adjusting the display brightness; = Ice maker vacation state; Adjusting the water quantity; = Set BioFresh temperature; Setting the BioFresh temperature

= Lower hinge heating control If condensed water appears in the lower hinge area or on the base plate between refrigerator and freezer compartment, increase the output of the heating located behind the base plate. The factory setting is set to = medium output. Changing the heating output • Activate ...

Page 9 - Confirm dust filter cleaning; SuperFrost; Equipment

GB = Confirm dust filter cleaning Once the dust filter in the appliance plinth has been cleaned, the dust filter LED in the display must be cancelled. Cancelling the dust filter symbol • Activate setup mode by touching the SuperFrost icon for 5 seconds. • Touch the freezer compartment Down icon unti...

Page 10 - Arranging food; Note; Interior light

Arranging food (1) butter, cheese (2) eggs (3) bottles (4) frozen food, ice cubes (5) meat, sausage products, dairy products (6) baked goods, pre-cooked meals (7) fruit, vegetables, salads (for high humidity setting) meat, cold meats, dairy products (for low humidity setting) The adjustable humidity...

Page 11 - Notes; Humidity selection; Humid

Freezing Fresh food should be frozen to the core as rapidly as possible. Frozen food can also be given a cold boost. This is provided by the SuperFrost facility. The maximum amount of food (in kg) which can be frozen in 24 hours is shown on the type plate ("Freezing capacity"). This amount v...

Page 13 - Activating the ice maker vacation state; Ice maker vacation state

Switching the ice maker on • Touch the IceMaker icon so that the IceMaker LED comes on. After you start the ice maker for the first time, it may take up to 24 hours before the first ice cubes are ready.The production capacity depends on the temperature inside the freezer compartment. The lower the t...

Page 14 - Cleaning; Before cleaning always switch off the appliance. Pull out; Do not use steam cleaners because of the; Refrigerator compartment; Cleaning the dust filter; Disconnect the appliance from the mains.

Cleaning Before cleaning always switch off the appliance. Pull out the mains plug or switch off or unscrew the fuse. • Clean the inside, equipment and outer walls with lukewarm water and a little detergent. Do not use abrasive or acid cleaners or chemical solvents. Do not use steam cleaners because ...

Page 15 - Malfunctions; You may be able to rectify the following faults by checking; Shutting your appliance down

Malfunctions You may be able to rectify the following faults by checking the possible causes yourself: Appliance does not function: – Is the appliance switched on? – Is the plug correctly fitted in the mains socket? – Is the fuse intact? Loud running noise: – Is the appliance set up firmly on the fl...