LG Washer W1119 - Manuals

The appliance must be correctlyinstalled and connected before thefirst use. Please see the "Installationinstructions". For safety reasons, it is not possible torun a spin cycle before the first use. Aprogram must be run without laundry and detergent to flush out any residual water from the f...

1. Prepare and sort the laundry ^ Empty all pockets. , Foreign objects left in pockets (e.g. nails, coins, paper clips, etc.)can cause damage to clothes andthe machine. ^ Sort the laundry. Only wash items in the machine that arelabeled machine washable by themanufacturer. Most garments have afabric ...

Program guide Temperatures Fabriccaresymbol Spin speed Laundry Normal Options: Extended, Heavy Soil, Soak, Sensitive Hot 8 Max For a rapid wash of colorfast items andmixed loads made from cottons andlinen, e.g. jeans, t-shirts, underwear,socks. Very Warm E High Warm 7 Cold 6 No Heat e e Wrinkle-free...

Special spin options Hold (only for the "Custom" program) ^ Select "Hold". The laundry is not spun and remainssoaking in water. This will preventwrinkles if the laundry is not removedimmediately at the end of the washprogram. To start the final spin ^ Select the desired spin speed. ^...

Use only high efficiency, low sudsinglaundry detergent formulated forfront loading washing machines. For wool and wool blend fabrics, use adetergent specially formulated forwoolens. Follow instructions on the detergentpackaging to ensure the correct usageand dosage amount. Adjust the amountof deterg...

The amount of detergent useddepends on the level of soiling: Light soiling No soiling or stains are visible. Normal soiling Some visible soiling or a few lightstains. Heavy soiling Very visible soiling or stains. The size of the load and the waterhardness level in your area have animpact on the amou...

Fabric softener Fabric softener added to the washprogram will make fabrics feel softerand will reduce static cling in the dryer. ^ Open the lid of the fabric softenercompartment § . ^ Pour liquid fabric softener into thecompartment according to themanufacturer’s instructions. Do not exceed the maxim...

7. Select Delay Start (if needed) If you wish, the start of the washprogram can be delayed to have a loadcompleted at a later time. Delay startallows you to delay the start of aprogram for 30 minutes to a maximumof 24 hours. ^ Press the "Delay Start" button. Thedelay start time will be exten...

10. Remove the laundry The "STATUS" indicator "Anti-Crease /End" will be displayed at the end of theprogram. ^ Use the "Door" button to open thedrum door. Do not attempt to remove laundryfrom the washer if the drum isturning. You may seriously injureyourself. If the drum turn...

Canceling a program You can cancel a wash program anytime after a program starts. ^ Press the "Start / Stop T " button. The washer drains the wash water awayand the program is canceled. To add or remove laundry ^ Press the "Door" button. To select another program ^ Turn off the washe...

Electronic program lock Washer in use The program lock prevents the washerfrom being opened or the program,temperature or spin speed from beingchanged during a wash program. To activate the program lock ^ Once the wash program has started,hold the "Start / Stop T " button until the "Chil...

, Before cleaning the appliance, disconnect the power supply byunplugging the unit or manuallytripping the circuit breaker. Cleaning the washer ^ Clean the exterior of the washer witha mild solution of non-abrasivedetergent or soap and water. Wipedry with a soft cloth. ^ Clean the drum with a stainl...

Cleaning the detergent drawer Detergent residue should be cleanedout regularly. ^ Pull the detergent drawer out as faras it will go. Press down on the redrelease lever and pull the drawer outof the machine. ^ Clean the detergent drawer withwarm water. ^ Clean the siphon tube. 1 . Remove the siphon t...

Cleaning the water inlet filters The washer has two water inlet filters toprotect each inlet valve. These filtersshould be checked and cleaned ifnecessary every 6 months. This mayneed to be done more frequently withsome water supplies. ^ Turn off the water supply. ^ Unscrew the inlet hose from the v...

Clean the drain pump Occasionally, small objects (buttons,coins, etc.) may become trapped in thelint trap. If the machine does not draincompletely, the lint trap should bechecked to ensure that it is free offoreign objects. ^ Open the detergent dispenserdrawer. ^ Remove the tool. ^ Open the access p...

Changing the light bulb A burnt out light bulb will not affect theperformance of the washer. ^ Remove the tool from behind thedetergent dispenser drawer. ^ Turn the washer on and open thedoor. ^ Disconnect the power supply to thework area by unplugging the unit,tripping the circuit breaker orremovin...

Quick Guide Remove this guide for easyreference Please read allinstructions, especiallythe "Important Safety Instructions", before using the washer.

5. Select the temperature and spinspeed ^ Press the "TEMP" and "SPIN" buttonsuntil the indicator of the desired valuelights. 6. Add detergent ^ Place the recommended amount ofdetergent into the main washcompartment j . If "Heavy Soil" is selected, add 1 / 4 of the total amoun...

, Repairs to electrical appliances must only be carried out by a qualified and trained person in accordance with local and national safety regulations.Repairs and other work by unqualified persons could be dangerous. Themanufacturer cannot be held responsible for unauthorized work. The following sec...

The program was interrupted and a fault message appears. Issue Possible cause Solution* The buzzer sounds, andthe "Drain" indicatorflashes."- - -". appears in thedisplay. The drain is blocked. Clean the drain pump and lint trap. See "Washer care -Cleaning the drain pumpand lint t...

General issues with the washer Issue Possible cause Solution The "Oversudsing"indicator lights. The machine has oversudsed. Use less detergent in thenext wash program. The "Main wash"indicator flashes. There is a fault. Restart the program.If the fault message appearsagain, call Miel...

Poor wash results Issue Possible cause Solution The wash does notcome clean withliquid detergent. Liquid detergents do notcontain bleachingagents. Fruit, coffee andtea stains cannot beeffectively removed. – Use powdered bleach. – Do not put liquid detergentand stain remover together inthe same wash ...

The door will not open when the "Door" button is pressed. Possible cause Solution The washer has nopower. Insert the plug into the outlet. The washer is notturned on. Turn on the washer using the "On / Off" button. The program lock isactivated. Deactivate the program lock as describe...

Opening the door during apower failure or when the drainis blocked ^ Turn off the appliance with the"On / Off" button. Draining the wash water If the main drain hose is clogged, waterwill be retained in the machine (max. 6.5 gal [25 l]) . , Caution: If laundry has been washed at a high tempe...

Opening the drum door , Always make sure the drum is stationary before reaching in toremove laundry. A moving drum isextremely dangerous. Door hinges on the right side ^ Insert a screwdriver into the notch ofthe left opening and pull downwards.The door will now open. Door hinges on the left side ^ I...

Repairs In the event of a fault which you cannotfix yourself, please contact the servicenumber on the back of this manual. When contacting the Technical ServiceDepartment, please quote the modeland serial number of your appliance.Both can be found on the data platevisible above the front glass on th...

Installation Instructions To prevent accidentsand machine damageread these instructions before installation or use.

Disposal of the packingmaterial The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable. Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of children, asthey pose a danger of su...

Front view a Hot water intake hose b Cold water intake hose c Power cord d - g Drain hose (drain options shown i.e adjustable and removableelbows). h Control panel i Detergent dispenser drawer j Drum door k Access panel to lint trap and drain pump l Access panel for draining and opening the machine ...

Back view a Lid excess end with transport grips b Power cord c Shipping struts with rotary protection d Hot water intake hose e Cold water intake hose f Drain hose Installation 40

^ Close the holes with the rotaryprotectors, making sure to close thecaps. ^ Fasten the shipping struts to the rearof the washer. Take care to insert thedrill holes correctly, b , into the clamps, a . , Do not move the washer without the shipping struts in place. Installing the shipping struts Reins...

Level the washer To ensure smooth operation, the washermust be level. Failure to level the machine can resultin increased water and energyconsumption, loud noises during thespin cycle or "walking" across the floorduring use. Adjust the four leveling feet The washer is leveled by adjusting th...

Installing the decor panel The door can be fitted with acustomized door panel (optionalaccessory) to match the adjacentcabinets. Decor panel measures : Width 23 1 / 4 " (591 mm) Height 23 1 / 4 " (590 mm) Thick 1 / 16 " - 3 / 16 " (0.6 - 4 mm) ^ Open the door. ^ Unscrew the 4 screws ...

Shortening the door panel The door panel can be shortened tomatch the height of the adjacentcabinetry. The measure X equals the space from the bottom of the washer door to thebottom of the adjacent cabinet. ^ Cut the bottom of the door panel witha jigsaw according to X . ^ Cut the side decor bars wi...

Installation beneath a counter If a countertop is placed over thewasher, at least a 1 / 4 " gap must be left between the top of the machineand bottom of the countertop;nothing should be within 1 / 2 " of any side of the washing machine. The niche height should be 32 5 / 16 " to 36 5 / 8 ...

Washer/ Dryer Stack The Miele washing machine can beinstalled as part of a washer-dryerstack in combination with a Mieletumble dryer. An appropriate "stackingkit*" is required. (* available from your Miele dealer orMiele.) Note: a Safety distance to the wall:minimum 13 / 16 " (2 cm) b He...

The washing machine can beconnected to a portable water supply.A non-return valve is not needed unlessrequired by building code. The washing machine has ½" (13 mm)pressure hoses with ¾" (19 mm) femalehose thread connections. If there is nowater hookup, contact a plumber toinstall a connectio...

Water connection ^ Connect the cold water intake hose(blue mark) to the cold water valveand the hot water intake hose (redmark) to the hot water valve. If the machine is being connected only to a cold water supply, both the hot andcold water intake hoses must beattached to the cold water valvethroug...

Drainage The 5 foot (1.5 m) drain hose may beconnected as follows: 1. Directly into a sink: hook the hose over the edge of the sink and secureit firmly (e.g. by tying the hose to thewater faucet). 2. To a stand pipe: place the drain hose into a 1 ½" (4 cm) stand pipeand secure it firmly. 3. To a...

GROUNDING INSTRUCTIONSThis appliance must be grounded. Inthe event of a malfunction orbreakdown, grounding will reducethe risk of electric shock byproviding a path of least resistancefor electric current. This appliance isequipped with a cord having anequipment-grounding conductorand a grounding plu...