LG W2363V - Manuals

LG W2363V – Manual in PDF format online.

Manuals:

Manual

Manual LG W2363V

Summary

Page 2 - On Safety; Do not Open the Display:; Important Precautions

1 This unit has been engineered and manufactured to ensure your personal safety,however improper use may result in potential electrical shock or fire hazards. Inorder to allow the proper operation of all safeguards incorporated in this display,observe the following basic rules for its installation, ...

Page 3 - On Installation; Avoid high temperatures and humidity.

2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not placethe display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a s...

Page 4 - On Cleaning; screen because over-spraying may cause electrical shock.; On Repacking; your local authority.

Important Precautions 3 On Cleaning Unplug the display before cleaning the face of the display screen.Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub...

Page 5 - Accessories; IMPORTANT

4 Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with yourmonitor. If any items are missing, contact your dealer. User's Guide/Cards Power Cord (Depending on the country) 15-pin D-Sub Signal Cable (To set it up, this signal cable may be attache...

Page 6 - Connecting the Display; Connecting and Disassembling the stand; Place the monitor face down on the soft cloth.

5 Connecting the Display Before setting up the monitor, ensure that the power to the monitor,the computer system, and other attached devices is turned off. Connecting and Disassembling the stand 1. Place the monitor face down on the soft cloth. 2. Assemble the Stand Base into the Stand Body in the c...

Page 7 - Then fold the screw handle flat.

6 Connecting the Display IMPORTANT This picture depicts the general model of connection. Your monitor may differ from the itemsshown in the picture.Do not carry the product upside down holding only the stand base. The product may fall andget damaged or cause injury. 4. Then fold the screw handle fla...

Page 8 - Positioning your display; After installation, adjust the angle as shown below.; ERGONOMIC

7 Connecting the Display Before setting up the monitor, ensure that the power to the monitor,the computer system, and other attached devices is turned off. Positioning your display After installation, adjust the angle as shown below. 1. Adjust the position of the panel in various ways for maximum co...

Page 9 - system, and other attached devices is turned off.; Connecting with the PC/AV equipment; NOTE

8 Connecting the Display A B Connect DVI-D (Digital signal) CableConnect D-sub (Analog signal) CableConnect VIDEO and AUDIO CableConnect HDMI Cable (HDMI1, HDMI2) 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2....

Page 10 - is executed automatically.

9 Connecting the Display NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts thedisplay to optimal settings for individual input signals. ‘AUTO/SET’ Function? Wh...

Page 11 - Control Panel Functions; Front Panel Controls; SOURCE Button; Use this button to enter or exit the On Screen Display.; The message; MENU button; for several seconds. The message; Button; Use this button to enter; AUTO BRIGHT

10 Control Panel Functions Front Panel Controls SOURCE Button When two or more input signals are connected, firstmonitor automatically detects one signal as main input,then you can select the input signal (DSUB/DVI/HDMI1/HDMI2/COMPONENT) you want. MENU Button Use this button to enter or exit the On ...

Page 12 - AUTO IMAGE ADJUSTMENT; When adjusting your display settings, always press the; Buttons; Use this button to turn the display on or off.; Power Button

11 Control Panel Functions Use this button to enter a selection in the On Screen Display. AUTO/SETButton AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). (Only DSUB and component mode)This will automatically adju...

Page 13 - On Screen Display (OSD) Control Adjustment; Screen Adjustment; To make adjustments in the On Screen Display, follow these steps:

12 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operatingparameters of the display is quick and easy with the On ScreenDisplay Control system. A short example is given below to familiarize you with the use of thecontrols. The followi...

Page 14 - On Screen Display(OSD) Selection and Adjustment

13 NOTE The order of icons may differ depending on the model (13~21). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and settingmenus. Main menu Sub-menu Reference THRU MODE SRS TRUSURROUND HD ARC AUTO BRIGHT PICTURE COLOR...

Page 15 - The OSD screen will appear when you press the; Turn off SRS function.

14 On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you press the button on the front of the monitor. Main menu Sub menu Description SRS TRUSURROUND HD ON Turn on SRS function, offer 3D surroundfor live sound effect. OFF Turn off SRS function. is a trademark of SRS Lab...

Page 17 - Press the; MENU; Button, then the main menu of the OSD appears.; Menu Name

16 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appear...

Page 18 - PICTURE; BRIGHTNESS; To adjust the brightness of the screen.

17 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE MENU : Exit : Decrease : Increase SET : Select another sub-menu BRIGHTNESS CONTRAST GAMMA BLACK LEVEL WHITEBALANCE To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamm...

Page 19 - COLOR

18 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PRESET RED GREEN BLUE HUE SATURATION COLOR RESET • sRGB: Set the screen color to fit the sRGB standard colorspecification. • 6500K: Slightly reddish white.• 9300K: Slightly bluish white. Set your own red color levels. ...

Page 20 - TRACKING; CLOCK; To adjust the clearness of the screen.; HORIZONTAL; To move image left and right.

19 On Screen Display(OSD) Selection and Adjustment TRACKING Main menu Sub menu Description MENU : Exit : Decrease : Increase SET : Select another sub-menu CLOCK PHASE SHARPNESS To minimize any vertical bars or stripesvisible on the screen background.The horizontal screen size will alsochange. To adj...

Page 21 - SETUP; LANGUAGE; OVERSCAN

20 On Screen Display(OSD) Selection and Adjustment Press the , buttons to reset immediately. SETUP MENU : Exit : Adjust : Adjust SET : Select another sub-menu Main menu Sub menu Description To choose the language in which the controlnames are displayed. To adjust position of the OSD window on thescr...

Page 22 - PIP; PIP INPUT; To select PIP on or off.; PIP SOUND

21 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PIP Select the PIP display location. Everytime you touch the button, it will movefrom to , , . Every time youpress the button, it will move fromto , , . You can use this menu toselect the PIP display location you want....

Page 23 - Troubleshooting; Check the following before calling for service.; No image appears

22 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power indicator blinking? ● Do you see an "OUT O...

Page 24 - Display image is incorrect

23 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. • Press the AUTO/SET button to automatically adjust your display image to...

Page 25 - Have you installed the; The screen color is; The Audio function is not working

24 Troubleshooting Do you see an "Unrecognized monitor, Plug&Play (VESA DDC)monitor found" message? ● Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with yourdisplay. Or, you can also download the driver ...

Page 26 - Specifications

25 Specifications 23.0 inches (58.4 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.4 cm0.265 x 0.265 mm (Pixel Pitch) Horizontal Freq. Analog, Digital: 30 - 83 KHz (Automatic)HDMI: 30 - 83 KHz (Automatic) Vertical Freq. Analog, Digital: 56 - 75 Hz (Automatic)HDMI: ...

Page 27 - HDMI Timing

26 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 123456789 10111213 *14 640 x 350720 x 400640 x 480640 x 480800 x 600800 x 600 1024 x 7681024 x 7681152 x 864 1280 x 10241280 x 10241680 x 10501680 x 10501920 x 1080 31.46931.46831.46937....

Page 28 - Indicator; LED Color

27 Specifications Indicator On Mode Sleep Mode Off Mode Blue Blue Blinking Off LED Color MODE Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 12345678 480i576i 480P576P720P720P 1080i1080i 15.7515.6231.5031.2537.5045.0028.1233.75 6050605050605060 Preset Modes (Resolution) Compon...

Page 29 - Installing the Wall mount plate

28 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plateor the interchange device. 1. Place the monitor face down on the soft cloth. 2. To disconnect the Stand Base from the Stand Body, unfold the screw handle andturn it to the left. 3. Pull out the Stand ...

Page 30 - Install the Wall mount plate.

Installing the Wall mount plate 29 4 . Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and isconnectable with Wall mount plate.Please refer to the installation guide for more details,which is provided when Wall mount plate ispurchased. Kensingt...

Page 31 - Digitally yours