Page 2 - On Safety; Do not Open the Display.; Important Precautions
A1 This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential electrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this display, observe the following basic rules for itsinstallation, ...
Page 3 - On Installation; screen because over-spraying may cause electrical shock.; On Repacking; your local authority.
A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place thedisplay where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink,laundry tub, in a wet basement, or near a ...
Page 4 - Connecting the Display; Connecting with the PC; NOTE
A3 Connecting the Display Connecting with the PC 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2. Connect the signal cable . When attached, tighten the thumbscrews to secure the connection. 3. Connect the power ...
Page 5 - To attach or separate the back cap
A4 Connecting the Display To attach or separate the back cap 1 . To attach the back cap, fix into the 2 holes as picture first then press the back cap to fit to the upper groove. 2 . To separate the back cap, hold the bottom part and pull it out. Kensington Security Slot Connected to a locking cable...
Page 6 - Important
A5 Connecting the Display Important This illustration depicts the general model of connection. Your monitor may differ fromthe items shown in the picture.Do not carry the monitor upside down holding only the stand base. The monitor mayfall and get damaged or injure your foot. Tilt Range : -5˚~15˚ W ...
Page 7 - Control Panel Functions; Front Panel Controls
A6 Control Function Control Panel Functions MENU Button Use this button to enter or exit from the On Screen Display. FUN Button Use this button to enter EZ ZOOMING , 4:3 IN WIDE , PHOTO EFFECT items, for more information, refer to page A14-A15. OSD LOCKED/UNLOCKED This function allows you to lock th...
Page 9 - On Screen Display (OSD) Control Adjustment; Screen Adjustment; MENU Button
A8 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The follow...
Page 10 - On Screen Display(OSD) Selection and Adjustment
A9 NOTE The order of icons may differ depending on the model (A9~A16 ). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus. EZ ZOOMING To adjust the resolution 4:3 IN WIDE To adjust the image size PHOTOEFFECT ...
Page 11 - Press the MENU Button, then the main menu of the OSD appears.
A10 Sub-menus On Screen Display(OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptio...
Page 12 - Main menu
A11 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues d...
Page 15 - FUN
A14 A14 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description EZ ZOOMING The OSD screen will appear when you touch the FUN button on the left bottom of the monitor. EZ Zoom lowers the display’s resolution insingle-step increments. Depressing the buttononce lowers the resolut...
Page 16 - PHOTO EFFECT
A15 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PHOTO EFFECT - NORMAL: The PhotoEffect function is disabled. - GAUSSIAN BLUR: This option is to add the effect to the screenthat the dark and sharp image becomesbrighter and more blurred. - SEPIA: This option changes ...
Page 18 - Troubleshooting; Check the following before calling for service.; No image appears
A17 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power on and the power indicator blue? ● Is the pow...
Page 19 - Display image is incorrect
A18 A18 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. • Press the AUTO/SET button to automatically adjust your display ima...
Page 20 - Have you installed the display driver?; Have you installed the; The screen color is
A19 Troubleshooting Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor,Plug&Play (VESA DDC)monitor found"message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with yourdispla...
Page 21 - Specifications
A20 Specifications NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play PowerConsumption Dimensions &Weight Tilt Range Power Input AC-DC Adapter Environmental Conditions Stand Base Signal cable Power cord 22 inches (55.8 c...
Page 22 - Indicator; LED Color
A21 Specifications Indicator On Mode Sleep Mode Off Mode blue Blue and white LED blinking Off LED Color MODE Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 123456789 1011 *12 720 x 400640 x 480640 x 480800 x 600800 x 600 1024 x 7681024 x 7681152 x 864...
Page 23 - Digitally yours