LG W1943T - Manuals

LG W1943T – Manual in PDF format online.

Manuals:

Manual

Manual LG W1943T

Summary

Page 2 - On Safety; Do not Open the Display:; On Installation; Important Precautions

A1 This unit has been engineered and manufactured to ensure your personal safety,however improper use may result in potential electrical shock or fire hazards. Inorder to allow the proper operation of all safeguards incorporated in this display,observe the following basic rules for its installation,...

Page 3 - On Cleaning; screen because over-spraying may cause electrical shock.; On Repacking; your local authority.

A2 Important Precautions Do not use this display near water such as near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a swimming pool.Displays are provided with ventilation openings in the cabinet to allow the releaseof heat generated during operation. If these openings ...

Page 4 - Connecting the Display; Important; Connecting the stand; Tie down the base lock to perpendicularity direction.

A3 Connecting the Display Important This illustration depicts the general model of connection. Your monitor may differ fromthe items shown in the picture.Do not carry the product upside down holding only the stand base. The product mayfall and get damaged or injure your foot. Before setting up the m...

Page 5 - Disassembling the stand

A4 Connecting the Display Disassembling the stand 1. Put a cushion or soft cloth on a flatsurface. 3. Change your lock on the product as it follows and turn it in the arrow direction. 2. Place the monitor face down onthe cushion or soft cloth. If you can't release the stand base even the locking rib...

Page 6 - Positioning your display; Ergonomic

A5 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range: -5˚~15˚ Ergonomic It is recommend...

Page 7 - Using the Computer; Power Cord; Signal Cable

A6 Connecting the Display OR Using the Computer 1. Make sure to turn off the computer and product. Connect the cable as below sketch mapform to . 1 2 2. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automat...

Page 8 - Using the cable holder

Connecting the Display A7 Using the cable holder (This feature is not available in all models.) N E P O 1 2 3 E P O N 4 N O PE Cable holder

Page 9 - Control Panel Functions; Front Panel Controls

A8 Control Function Control Panel Functions MENU Button Use this button to enter or exit from the On Screen Display. Use this button to enter 4:3 IN WIDE , PHOTO EFFECT items, for more information, refer to page A16. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, ...

Page 10 - DVI

A9 Control Function Control Panel Functions This Indicator lights up as red when the display isoperating normally(On Mode). If the display is inSleep Mode (Energy Saving), this indicator colorchanges to flicker. Use this button to turn the display on or off. Power Button Power Indicator Use this but...

Page 11 - On Screen Display (OSD) Control Adjustment; Screen Adjustment; To make adjustments in the On Screen Display, follow these steps:

A10 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters ofthe display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls.The follo...

Page 12 - On Screen Display(OSD) Selection and Adjustment

A11 On Screen Display(OSD) Selection and Adjustment NOTE The order of icons may differ depending on the model (A11~A17 ). The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu Sub-menu A D Reference To adjust screen color mode PRESET OSDPOSITION To...

Page 13 - Press the MENU Button, then the main menu of the OSD appears.

A12 Sub-menus On Screen Display(OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed below are the icons, icon names, and icondescriptio...

Page 14 - Main menu

A13 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50On the monitor, high gamma valuesdisplay whitish images and low gammavalues d...

Page 17 - PHOTO EFFECT

A16 A16 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description The OSD screen will appear when you touch the button on the right bottom of the monitor. 4:3 IN WIDE To select the image size of the screen. • WIDE: Switch to full screen mode according toinput image signal. • 4 :...

Page 19 - Troubleshooting; Check the following before calling for service.; No image appears

A18 Troubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power indicator flickering? ● Do you see an "OU...

Page 20 - Display image is incorrect

A19 A19 Troubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, verticalbars or stripes arevisible. ● Any horizontal noise appearing in anyimage or charactersare not clearlyportrayed. • Press the AUTO/SET button to automatically adjust your display ima...

Page 21 - The screen color is; Have you installed the display driver?; Have you installed

A20 Display image is incorrect ❁ The screen color is mono or abnormal. ❁ The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. •Make sure the video card is properly inserted in the slot. •Set the color setting higher than 24 bits (true col...

Page 23 - Specifications; Indicator; LED Color

A22 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 12345678 *9 720 x 400640 x 480640 x 480800 x 600800 x 600832 x 624 1024 x 7681024 x 768 1360 x 768 31.46831.46937.50037.87946.87549.72548.36360.12347.712 706075607575607560 * Recommend ...

Page 24 - Digitally yours