LG STB1000 - Manuals - manualsarea.com

Page 2 - WARNING; RISK OF ELECTRIC SHOCK

2 206-4147 WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dan...

Page 3 - IMPORTANT SAFETY INSTRUCTIONS; re or electric shock.; Outdoor Use/Wet Location; fl

3 206-4147 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s...

Page 4 - ed electrician install a; Antenna Grounding According to NEC, ANSI/NFPA 70; ned space such as a bookcase.

4 206-4147 IMPORTANT SAFETY INSTRUCTIONS (Continued from previous page) 20. Grounding Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., an STB with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are no...

Page 5 - References; Table of Contents; Notes; • Installer Menu content is intended for use primarily by quali

5 206-4147 Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Important Safety Instructions . . . . . . . . . . . . . . . . . . . 3 – 4Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setup Checklist . . . . . . . . . . . . . . . . . . ....

Page 6 - Setup Checklist; Installation and Setup; institution and configure display features for the end user).; Software Installation

6 206-4147 Setup Checklist Installation and Setup __ Unpack the STB1000 and all accessories. Accessories provided: • 6 ft AC power cord• 5 ft RS-232C-F to RS-232C-F null-modem cable with 3.5 mm stereo plug• 5 ft RS-232C-M to RS-232C-F straight-through cable• 5 ft HDMI to DVI-M cable• 1 ft DVI-F to H...

Page 7 - Connect to standard 120V; STB1000 Rear and Front Panel Overview; Connect to LG display; slowly if a Channel Map is de

7 206-4147 DIGITAL VIDEO OUT AC IN AC OUT MAX 8A 960W USB SERVICE ONLY AV IN 2 VIDEO L/MONO -AUDIO- R AUDIO OUT INT PILLOW PILLOW SPEAKER ANT DISPLAY IR IN IR RECEIVER IN AC 120V~ 60Hz COMPONENT IN VIDEO AUDIO R L UPD ATE RESE T AUDIO (RGB/DVI) P B Y P R ......... .......... 2 1(DVI) DIGIT AL VIDEO ...

Page 8 - DIGITAL VIDEO IN; RJP; DISPLAY CONTROL; For future application.; STB1000 Jack Panel Overview

8 206-4147 COMPONENT IN VIDEO AUDIO R L UPDATE RESET AUDIO (RGB/DVI) P B Y P R . . . . . . . . . .......... 2 1(DVI) DIGITAL VIDEO IN OPTICAL DIGITAL AUDIO OUT REMOTE CONTROL OUT SPEAKER OUT 8 RJP INTERFACE RGB IN VIDEO R -AUDIO- L/MONO A V IN 1 RGB(PC) . . . . . . . . . . . . . . . TV-LINK CFG MPI/...

Page 9 - Ventilation; Proper clearance for air to; Ventilation / Mounting the STB1000; Vent Holes; Monitor/STB1000 Wall Mounting System

9 206-4147 POWER STA TUS STB1000 DIGITAL VIDEO OUT AC IN AC OUT MAX 8A 960W USB SERVICE ONL Y AV IN 2 VIDEO L/MONO -AUDIO - R AUDIO OUT INT PILLOW PILLOW SPEAKER ANT DISPLAY IR IN IR RECEIVER IN AC 120V~ 60H z STB1000 Vent Holes Ventilation The STB1000 generates heat during operation and needs to be...

Page 10 - STB1000 Cabling Connections; Wall Jack; • This diagram shows a typical

10 206-4147 STB1000 Cabling Connections Refer to the cabling diagram below, and complete the procedure on page 11 to connect the STB1000 to a compatible LG display panel. . . . . . . . . . . . . . . . . . . . . . . . . DIGITAL VIDEO OUT AC IN AC OUT MAX 8A 960W USB SERVICE ONLY AV IN 2 VIDEO L/MONO ...

Page 11 - IR Bracket; To IR RECEIVER IN

11 206-4147 STB1000 Cabling Connections (Cont.) 1. Use one of the supplied RS-232 cables—either the serial DB9-Female to DB9-Female null-modem cable or the DB9-Female to DB9-Male straight-through cable, depending on display panel requirements—to connect the DISPLAY CONTROL connector on the STB1000 j...

Page 12 - Installing Batteries in Installer Remote; Open the battery compartment cover on the back side of the remote.

12 206-4147 STB1000 Installer Remote The LG Installer Remote is supplied with and dedicated to operate the STB1000. See next page for typical key functions. Some DVD and VCR controls may be available for selected LG DVD/VCR products. + AAA AAA + Installing Batteries in Installer Remote • Open the ba...

Page 13 - Installer Remote Control Typical Key Functions; Each analog channel may have its own SAP setting.

13 206-4147 Installer Remote Control Typical Key Functions 1 2 3 4 5 6 7 8 9 0 ABC DEF GHI JKL MNO PQRS TUV WXYZ PIP CH- PIP CH+ PIP SWAP PIP INPUT PIP SAP FLASHBK REMOVE ALPHA/NUM PAGE MUTE TIMER MENU RETURN VOL CH POWER GUIDE INPUT CC ENTER TV DVD VCR STB &@ .:/, RATIO PORTAL INFO i NUMBER But...

Page 14 - Pro:Centric Interactive Menu Features; Channel Guide

14 206-4147 Important: Pro:Centric operation requires that Installer Menu item 119 DATA CHANNEL be set appropriately and that the STB1000 be in PPV or FTG Mode. The interactive Pro:Centric STB enables guests—from the comfort of their rooms—to view and select from a complete listing of hotel/institut...

Page 15 - on the Installer; The USB menu option

15 206-4147 STB1000 Setup Menus CHANNEL PICTURE AUDIO INPUT OPTION LOCK TIME USB PICTURE Enter Move TIME Enter Move AUDIO Enter Move CHANNEL Enter Move INPUT Enter Move LOCK Enter Move OPTION Enter Move On-screen setup menus control the basic features of the STB1000/display. Press MENU on the Instal...

Page 16 - Channel Setup Options; Auto Tuning

16 206-4147 Channel Setup Options Auto Tuning (Channel Search) Auto Tuning (Channel Search) Auto Tuning automatically finds and stores all digital and analog channels available through antenna or cable inputs.1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highligh...

Page 17 - View Digital Signal Strength; CHANNEL; • A password is required to gain access to Manual

17 206-4147 Channel Setup Options (Cont.) Manual Tuning (Add/Delete Channels) / View Digital Signal Strength Manual Tuning (Add/Delete Channels) Use this option to manually add active channels or remove unwanted channels. See also “Edit Channels” on the following page.1. Press MENU on the Installer ...

Page 18 - Edit Channels / Channel Labels; Edit Channels; Channel Edit; Channel Label; The picture view at the left of the pop-

18 206-4147 Channel Setup Options (Cont.) Edit Channels / Channel Labels CHANNEL Enter Move Close Channel ANALOG 11-0 Logo PBS ► ► PBS Edit Channels Use this option to add or delete channels from the channel lineup.1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/hi...

Page 19 - Picture Setup Options; PICTURE; • The RGB-PC input source can only use the; button repeatedly

19 206-4147 Picture Setup Options Aspect Ratio (Picture Size) Control PICTURE Enter Move R G ► Aspect Ratio : 16:9 Picture Mode : Standard • Backlight 90 • Contrast 90 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 16:9 Just ScanSet By Program4:3Zoom Notes: • The RGB-PC input source can only use...

Page 20 - Picture Mode; • Most manual options are disabled (grayed out) if

20 206-4147 Picture Setup Options (Cont.) Picture Mode PICTURE Enter Move R G ► Aspect Ratio : 16:9 Picture Mode : Standard • Backlight 90 • Contrast 90 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Intelligent SensorVivid Standard NaturalCinemaSportGame Picture Mode This feature enables you to...

Page 22 - SCREEN

22 206-4147 Picture Reset This option restores the Picture Mode to factory default settings.1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the PICTURE menu option. Then, press ENTER . 2. Use the Up/Down arrows to select Picture Reset under Picture Mode, ...

Page 23 - To Set

23 206-4147 Screen Auto Con fi guration This option automatically adjusts the picture position and mini-mizes image instability. 1. In the Screen Menu, use the Up/Down arrows to select Auto Con fi g , and then press ENTER . 2. Use the Left/Right arrows to select Yes , and then press ENTER to initiat...

Page 24 - Option Settings; Menu Language / Audio Language

24 206-4147 Option Settings Menu Language / Audio Language Menu Language Use this option to select the language of on-screen menus.1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the OPTION menu option. Then, press ENTER . 2. Use the Up/Down arrows to sel...

Page 25 - Captions; • Closed Captions typically scroll across the; button repeatedly until

25 206-4147 OPTION Enter Move Menu Language : English Audio Language : English Caption : Off Set ID : 1 Demo Mode : Off Data Broadcasting Option Settings (Cont.) Captions Captions Use this option to select the appropriate mode for displaying captions. Caption text, if provided by the broadcaster, is...

Page 27 - Audio Setup Options

27 206-4147 Audio Setup Options Auto Volume / Clear Voice II / Balance Auto Volume Each broadcasting station has its own signal conditions, which may result in different volume levels for different programs/channels. This option enables the STB1000 to make automatic adjustments to maintain a consist...

Page 28 - • With preset Sound Mode options, the STB sets

28 206-4147 Audio Setup Options (Cont.) Sound Mode Sound Mode This feature enables you to select a preset Sound Mode option and/or customize sound settings manually. 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the AUDIO menu option. Then, press ENTER ...

Page 30 - Time Setup Options; Set the STB Clock / STB On and Off Time Settings; Clock; TIME; Off Time

30 206-4147 Time Setup Options Set the STB Clock / STB On and Off Time Settings Set the STB Clock The STB1000 clock is set automatically from a digital channel signal. The signal includes clock information provided by the broadcasting station. You can also set the clock manually if the auto clock fu...

Page 31 - On Time

31 206-4147 Sleep Timer 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the TIME menu option. Then, press ENTER 2. Use the Up/Down arrows to select Sleep Timer , and then press ENTER . 3. In the Sleep Timer pop-up window, use the Up/Down arrows to select ...

Page 32 - Lock Setup Options; Lock System Overview / Enable or Disable the Lock System; LOCK; Enable or Disable the Lock System

32 206-4147 Lock Setup Options Lock System Overview / Enable or Disable the Lock System Lock System Overview Parental Control can be used to block individual channels, programs with speci fi c ratings or in speci fi c categories, and external viewing sources. It is also possible to block all program...

Page 33 - Set Password / Channel Blocking; Set Password

33 206-4147 Lock Setup Options (Cont.) Set Password / Channel Blocking LOCK Enter Move Lock System : Off Set Password Block Channel Movie RatingTV Rating-ChildrenTV Rating-GeneralDownloadable RatingInput Block Set Password Use the following procedure to set a new password for the Lock System.1. Pres...

Page 36 - PG: Parental Guidance suggested

36 206-4147 LOCK Enter Move Lock System : Off Set PasswordBlock Channel TV Rating-English TV Rating-FrenchDownloadable RatingInput Block E C C8+ G PG 14+ 18+ Blocking Off Blocking off : Permits all programs • E: Exempt • C: Children • C8+: Children eight years and older • G: General audience • PG: P...

Page 38 - Select the Input Source; Input Settings; You can also use the INPUT button on; to activate your selection.

38 206-4147 Select the Input Source 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the INPUT menu option. Then, press ENTER . 2. Use the Up/Down arrows to select the appropriate input source (see descriptions below). Then, press ENTER . 3. Press MENU to ...

Page 39 - Overview; FTG Mode; Installer Menu; Commercial Mode Setup Overview

39 206-4147 Overview This document describes how to set up the STB1000 for Commercial Mode either while in the Embedded b -LAN™ (EBL) module’s Pass-through Mode or its Free-To-Guest (FTG) Mode. Note: The b -LAN module is internal to the STB1000 and allows the institution head end equipment to commun...

Page 40 - Commercial Mode Setup for Master STB1000; Typical STB1000 Installer Menu; 03 BAND/AFC 00X

40 206-4147 Commercial Mode Setup for Master STB1000 Typical STB1000 Installer Menu Adjust the settings for these Installer Menu items. 1. Set Installer Menu items. This step provides speci fi c instruction only on the Installer Menu items that should be set on a Master TV. Refer to pages 43 to 48 f...

Page 42 - Accessing the Installer Menu

42 206-4147 Installer Menu Typical STB1000 Installer Menu Use the Installer Menu to set up or change operational settings.Refer to the table starting on the next page for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. Accessing the Installer Menu 1. ...

Page 45 - Detailed Descriptions of Installer Menu Items; 00 - INSTALLER SEQUENCE

45 206-4147 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Speci fi es entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The Power Ma...

Page 49 - Adding Channel Label Icons / Custom Channel Labels; XYZ; NETWORK

49 206-4147 Adding Channel Label Icons / Custom Channel Labels (2-5-4 + MENU Mode) Changing a Channel’s Icon on the Master STB1000 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel ID display. 3. Use the Up/Down arro...

Page 50 - Cloning Overview / Clonable Menu Features; Clonable Menu Features; Before you begin cloning:; Complete the Commercial Mode Setup procedure on pages 40 to 41.

50 206-4147 Use one of the following options to Learn and Teach the Master STB1000 Setup: • Using a USB memory device • Using a TLL-1100A clone programmer • Using a LT2002 clone programmer Each option is described in further detail on the pages that follow. As you perform cloning proce-dures, be sur...

Page 51 - Cloning Procedures

51 206-4147 Cloning Procedures Learning / Teaching a Master STB1000 Setup using a USB Memory Device Learn Setup from Master STB1000 1. Ensure the Master STB1000 is set up completely and the EBL is in Pass-through Mode. 2. Plug the USB memory device into the USB port on the Master STB1000 rear panel....

Page 52 - MPI; Rear Panel

52 206-4147 Cloning Procedures (Cont.) Learning / Teaching a Master STB1000 Setup using a TLL-1100A Clone Programmer Warning: Do not connect a clone programmer to the STB1000 MPI/GAME CONTROL port while the STB is in LodgeNet PPV Mode, as this will damage the clone programmer. CLONE SELECTION MENUSe...

Page 58 - FTG Mode of Operation; FTG Con; Application; Laptop; Jack Panel

58 206-4147 FTG Mode of Operation FTG Con fi guration Overview The following steps outline local FTG configuration of individual STB1000s. Since these models are equipped with the EBL module, they can also be broadcast configured in FTG Mode by a Free-To-Guest Management Appliance (FMA) head end dev...

Page 59 - ASPECT RATIO; Set By Program; Click to transfer the STB Channel Map; Logical Channel numbers will

59 206-4147 CHANNEL PICTURE AUDIO TIME INPUT USB OPTION LOCK STB Setup Menus Shows that the EBL is in Pass-through Mode . Function Menu Shows that the EBL is in FTG Mode . While this menu is present on-screen, Installer Menu settings can ONLY be accessed/changed using the FTG Configuration Applicati...

Page 61 - Logical Channel numbers will automatically be

61 206-4147 FTG Mode of Operation (Cont.) FTG Installer Menu Con fi guration Utility Overview LEARN Click to transfer Installer Menu settings from the PTC to the EBL and FTG Configuration Application. * INSTALLER DEFAULTS Click to reset FTG Installer Menu items shown in the FTG Configuration Applica...

Page 62 - Remote Jack Pack Setup; RJP AVAILABLE; STB Connections; Remote Jack Pack Connections & Setup; RJP INTERFACE

62 206-4147 Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 001). See Installer Menu detailed descriptions for further informati...

Page 63 - External Equipment Setup; Digital Audio Optical Connections / Component Connections; Typical Digital Audio; Component Connections

63 206-4147 External Equipment Setup Digital Audio Optical Connections / Component Connections Digital Audio Optical Connections 1. Connect an optical cable between the OPTICAL DIGITAL AUDIO OUT con-nector on the STB1000 jack panel and the digital audio input connector on the external Digital Audio ...

Page 64 - DVI Cable; RGB Hookup to PC; External Equipment; HDMI; Audio Out

64 206-4147 .......... COMPONENT IN VIDEO AUDIO R L UPDATE RESET AUDIO (RGB/DVI) P B Y P R . . . . . . . . . .......... 2 1(DVI) DIGITAL VIDEO IN OPTICAL DIGITAL AUDIO OUT REMOTE CONTROL OUT SPEAKER OUT 8 RJP INTERFACE RGB IN VIDEO R -AUDIO- L/MONO A V IN 1 RGB(PC) . . . . . . . . . . . . . . . TV-L...

Page 65 - Composite Connections; Connect a composite cable between the

65 206-4147 External Equipment Setup (Cont.) Composite Connections L R VIDEO COMPONENT IN VIDEO AUDIO R L UPDATE RESET AUDIO (RGB/DVI) P B Y P R . . . . . . . . . .......... 2 1(DVI) DIGITAL VIDEO IN OPTICAL DIGITAL AUDIO OUT REMOTE CONTROL OUT SPEAKER OUT 8 RJP INTERFACE RGB IN VIDEO R -AUDIO- L/MO...

Page 66 - Reference: Upgrading STB Software using a USB Memory Device; Checking the Software Versions; CPU Version; Upgrading TV/PTC Software

66 206-4147 Reference: Upgrading STB Software using a USB Memory Device Checking the Software Versions Note: This function is not accessible while the TV is in FTG or PPV Mode. You can check the software versions of the STB by accessing the Installer Menu with the Installer Remote: Press MENU repeat...

Page 67 - Reference: Downloading a Splash Screen using a USB Memory Device; Splash Screen Image File Guidelines

67 206-4147 Reference: Downloading a Splash Screen using a USB Memory Device Splash Screen Image File Guidelines • The splash screen image must be a 24-bit (RGB 8 x 8 x 8) BMP. • The image should be no larger than 3 MB. • The ideal resolution for the image is 1366 x 768 pixels. • The image fi le mus...

Page 68 - Reference: RS-232 Display Panel Requirements; RS-232 Null Configuration

68 206-4147 Reference: RS-232 Display Panel Requirements DB9 Male LG monitors/displays listed below require an RS-232 serial null-modem DB9 cable with female connectors at each end. 3-Wire Configuration(serial Female-Female null-modem cable) RS-232 Null Configuration DISPLAY CONTROL RS-232 Pin Con f...

Page 69 - PANEL TYPE Setting

69 206-4147 Reference: Display Panel Type Speci fi cations The following table identifies the Installer Menu item 113 PANEL TYPE setting for each of the compatible monitors/TVs listed in the “RS-232 Display Panel Requirements” Reference. PANEL TYPE Setting Monitor/Display 0 1 2 3 4 M3203CCBA X M3204...

Page 70 - START AUX

70 206-4147 Reference: STB1000 Aux Input Con fi guration DIRECT ACCESS Tuning STB ENABLE MPI DATA START AUX SOURCE ASSIGN- MENT Installer Menu MPI DATA STATUS TYPE 0x41 SOURCES ENABLED (R/W) DATA STATUS TYPE 0xD2 CURRENT AV SOURCE (R) DATA STATUS TYPE 0x0D AUX SOURCE (R) OLD_ OCV = 0 OLD_ OCV = 1 So...

Page 71 - Reference: STB1000 Camport Auto Sense Operation; Selectable; : Can be accessed with INPUT key, direct; Auto Sense; : STB switches to this input when connector is; CAMPORT (AV IN 2 Video) Functionality Control

71 206-4147 Reference: STB1000 Camport Auto Sense Operation The Camport Auto Sense function is enabled when:1. Installer Menu item 034 CAMPORT EN is set to 1 AND2. Installer Menu item 040 AUTO CAMPORT is enabled (1). Selectable : Can be accessed with INPUT key, direct access, etc. Auto Sense : STB s...

Page 73 - Reference: RJP Model List and Input Auto-sensing Hierarchy; Digital Video In

73 206-4147 Reference: RJP Model List and Input Auto-sensing Hierarchy RJP Model List Legacy Models Scaler Models RJP-101M RJP-201M RJP-101ML N/A RJP-110F N/A RJP-110FW N/A RJP-110W N/A RJP-110WBR N/A RJP-110S N/A RJP-120G N/A RJP-120T N/A RJP-201B RJP-301B, RJP-401W RJP-202B N/A RJP Input Auto-sens...

Page 74 - Reference: Programming the Installer Remote; and; on the remote to store the code.

74 206-4147 Reference: Programming the Installer Remote The Installer Remote can be programmed to operate most remote-controllable devices. Note that the Installer Remote may not control all models of other brands.1. Test the remote to fi nd out whether it can operate other components without progra...

Page 75 - Reference: Remote Control Codes; CURTIS MATHES; Brand; VCR Codes

75 206-4147 Reference: Remote Control Codes Brand Code(s) AIWA 034 AKAI 016, 043, 046, 124, 125, 146 AMPRO 072 ANAM 031, 033, 103 AUDIO DYNAMICS 012, 023, 039, 043BROKSONIC 035, 037, 129 CANON 028, 031, 033 CAPEHART 108 CRAIG 003, 040, 135 CURTIS MATHES 031, 033, 041 DAEWOO 005, 007, 010, 064, 065, ...

Page 76 - DVD Codes

76 206-4147 DVD Codes Brand Code(s) APEX DIGITAL 022ONKYO 008, 017 PANASONIC 003, 009 PHILIPS 013 PIONEER 004, 026 PROCEED 021 PROSCAN 005, 006 RCA 005, 006 SAMSUNG 011, 015 SONY 007 THOMPSON 005, 006 TOSHIBA 008, 019 YAMAHA 009, 018 ZENITH 010, 016, 025 Reference: Remote Control Codes (Cont.)

Page 77 - Single pulse, modulated with 37.917KHz signal at 455KHz

77 206-4147 Reference: IR Codes Con fi guration of Frame 1st frame Repeat frame Lead Code Repeat Code Bit Description Frame Interval: Tf The waveform is transmitted as long as a key is depressed. Bit “0” Bit “1” Remote Control Connection Connect your wired remote control to the REMOTE CONTROL OUT po...

Page 79 - Troubleshooting; General Troubleshooting; Some Quick and Easy Tips for Resolving Problems

79 206-4147 Troubleshooting General Troubleshooting Some Quick and Easy Tips for Resolving Problems Software Problems Cannot direct enter channel number or “No Signal” appears. Channel not included in channel lineup in internal STB controller (PTC). After 2-5-5 + MENU, only channels included in STB ...

Page 80 - Troubleshooting Flow Chart

80 206-4147 Controller Quick Check Bad STB Yes No No Yes Press POWER on Installer Remote. STB responded? No Yes End Bad STB Display panel ON? Yes No Press VOLUME UP/ DOWN or MUTE key on LG Installer Remote. STB conected to AC Power? Plug into AC Power outlet. 1. 2. 3. No Yes Make sure the display pa...

Page 81 - Commercial Mode Check / FTG Operation Troubleshooting; Press; FTG Operation Troubleshooting; Symptom; Check and connect communication cables.; Commercial Mode Check

81 206-4147 Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting Press POWER on Installer Remote. STB responded? Bad STB Yes No STB stopped responding or continued to respond? STB is in Commercial Mode. Stopped responding STB is not in Commercial Mode. Call Technical Support...

Page 82 - Clone Programmer Troubleshooting; Reset Clone Programmer; Clone Programmer

82 206-4147 Troubleshooting (Cont.) Clone Programmer Troubleshooting Warning: Do not connect a clone programmer to the STB1000 MPI/GAME CONTROL port while the STB is in LodgeNet PPV Mode, as this will damage the clone programmer. Reset Clone Programmer After Static Shock After replacing exhausted ba...

Page 83 - Specifications; -4 to 122 degrees Fahrenheit; Note: Design and speci

83 206-4147 Specifications Dimensions Height: 1.77 inches (45 mm)Width: 13.875 inches (352.42 mm)Depth: 9.72 inches (247 mm) Weight: 6.4 pounds (2.90 kgrms) Environmental Storage Conditions Temperature: -20 to 50 degrees Celsius -4 to 122 degrees Fahrenheit Humidity: 10% to 90% Environmental Operati...

Page 84 - Glossary of Terms; A list of de

84 206-4147 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV. 300 TO 75 OHM ADAPTER A small device that connects a 2-wire 300...

Page 85 - Document Revision History / Notes; Date; Revision A: New document; Literature & Downloads; tab at the bottom of the STB1000 page, and select the required

85 206-4147 Document Revision History / Notes Notes Document Revision History Date Description February 2011 Revision A: New document Product documentation is available online at: www.LGsolutions.com/products . From the Products page, select TVs, Systems & Solutions , then Interface / Control Bo...

Page 86 - Revision A; One year parts and labor from date of purchase or delivery date.; LG STB1000 HD Commercial Interface STB Warranty; -LAN is a trademark of LodgeNet Interactive Corporation. All other

© Copyright 2011, LG Electronics U.S.A., Inc. 206-4147 Revision A Broadcast Products Welcome to the LG family! We believe that you will be pleased with your new STB1000 HD Commercial Interface STB. Please read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law. This war...