LG RU-60PZ61 - Manuals - manualsarea.com

Page 2 - POWER CORD POLARIZATION:; WARNING; a r n i n g

2 Plasma TV Warning WA R N I N G : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un...

Page 3 - Important safeguards for you and your new product; S a f e t y I n s t r u c t i o n s

Owner’s Manual 3 Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electricalshock or fire hazards. To avoid defeating the safeguards that have been built into your new pro...

Page 4 - S a f e t y I n s t r u c t i o n s c o n t i n u e d

4 Plasma TV Safety Instructions Antenna Lead in Wire Antenna Discharge Unit(NEC Section 810-20) Grounding Conductor(NEC Section 810-21) Ground Clamps Power Service GroundingElectrode System (NECArt 250, Part H) Ground Clamp Electric Service Equipment Example of Grounding According to NationalElectri...

Page 5 - C o n t e n t s; Introduction; S e t u p a n d O p e r a t i o n C h e c k l i s t

Owner’s Manual 5 Introduction C o n t e n t s C o n t e n t s Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 Introduction Controls . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 6 - I n t r o d u c t i o n; 60° - Wide angle range of vision

6 Plasma TV Introduction I n t r o d u c t i o n I n t r o d u c t i o n What is a Plasma Display Panel (PDP)? A plasma display panel is the latest display technology. It is currently the best way to achieve flat panel displays with excellentimage quality and large screen sizes, that are easily view...

Page 7 - C o n t r o l s; F r o n t P a n e l C o n t r o l s; Remote Control Sensor

S-VIDEO VIDEO AUDIO L/MONO R TV/VIDEO MENU VOL CH ON/OFF FRONT A/V INPUT R TruSurround XT ruSurround XT ON/OFF S-VIDEO VIDEO AUDIO L/MONO R ON/OFF S-VIDEO VIDEO AUDIO L/MONO R FRONT A/V INPUT FRONT A/V INPUT TV/VIDEO MENU VOL CH R TruSurround XT ruSurround XT TV/VIDEO MENU VOL CH R TruSurround XT ru...

Page 8 - C o n n e c t i o n O p t i o n s; Input

8 Plasma TV Introduction C o n n e c t i o n O p t i o n s C o n n e c t i o n O p t i o n s RGB INPUT Antenna AUDIO INPUT DVI INPUT REMOTE CONTROL AC INPUT R EXTERNAL SPEAKER R L RS-232C INPUT (CONTROL/SERVICE) S-VIDEO AUDIO VIDEO COMPONENT INPUT 2 COMPONENT INPUT 1 MONITOR OUTPUT A/V INPUT 1 (R) (...

Page 9 - MULTIMEDIA; SPLIT ZOOM; Installing Batteries; R e m o t e C o n t r o l K e y F u n c t i o n s; LIGHT

Owner’s Manual 9 Introduction - When using the remote control, aim it at the remote control sensor on the TV. TV/VIDEO MULTIMEDIA MODE ARC APC VOL CH MENU PIP/DW CAPTION EXIT PIP CH- PIP CH+ SWAP PIP INPUT PLAY PAUSE STOP RECORD WIN.SIZE WIN.POSITION SLEEP A.PROG ENTER MTS MEMORY/ERASE SPLIT ZOOM RE...

Page 10 - I n s t a l l a t i o n; I n s t a l l a t i o n I n s t r u c t i o n s; GROUNDING

10 Plasma TV Installation I n s t a l l a t i o n I n s t a l l a t i o n I n s t a l l a t i o n I n s t r u c t i o n s I n s t a l l a t i o n I n s t r u c t i o n s GROUNDING Ensure that you connect the grounding / earth wire to prevent possibleelectric shock. If grounding methods are not possi...

Page 11 - Joinning the TV assembly to the wall to protect the set tumbling; S p e a k e r s m o u n t e d o n t h e m o n i t o r; M o u n t i n g s p e a k e r s o n

Owner’s Manual 11 Installation - Secure the TV assembly by joinning it to a wall by using the TV/Wall brackets.- RU-60PZ61 series TV’s stand is saled, separately .- Here shown may be somewhat different from your TV. Joinning the TV assembly to the wall to protect the set tumbling • After the set mus...

Page 12 - E x t e r n a l E q u i p m e n t C o n n e c t i o n s; A n t e n n a C o n n e c t i o n

12 Plasma TV Installation - Antenna or Cable Service without a Cable Box Connections- For optimum picture quality, adjust antenna direction if needed. E x t e r n a l E q u i p m e n t C o n n e c t i o n s E x t e r n a l E q u i p m e n t C o n n e c t i o n s A n t e n n a C o n n e c t i o n A n...

Page 13 - V C R S e t u p; C a b l e

Owner’s Manual 13 Installation NOTE: All cables shown are not included with the TV - To avoid picture noise (interference), leave an adequate distance between the VCR and TV- Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time....

Page 14 - How to connect; NOTE: If your DVD player does not have component video output,; How to use; E x t e r n a l; DVD; or

14 Plasma TV Installation • Component Input ports To get better picture quality, connect a DVD player to the compo-nent input ports as shown below. How to connect Connect the audio and video cables from the externalequipment's output jacks to the TV input jacks, as shown inthe figure. When connectin...

Page 15 - Use TV/VIDEO or MULTIMEDIA on the remote control to select; D T V S e t u p; M o n i t o r O u t S e t u p

Owner’s Manual 15 Installation How to connect Use the TV’s COMPONENT (Y, P B , P R ) INPUT jacks, RGB or DVI port for video connections, depending on your set-top box connections available.Then, make the corresponding audio connections. How to use 1. Turn on the digital set-top box. (Refer to the ow...

Page 16 - P C S e t u p

16 Plasma TV Operation How to connect 1. To get the best picture quality, adjust the PC graphics card to (RU-42PZ61->1024x768, RU-42PZ71->852x480, RU-50/60PZ61->1366x768),60Hz. 2. Use the TV’s RGB INPUT or DVI (Digital Visual Interface) INPUT port for video connections,depending on your PC ...

Page 17 - Displayable Monitor Specifications

Owner’s Manual 17 Operation 48.363 56.476 60.023 68.677 47.700 59.625 47.700 59.625 54.348 63.995 67.500 77.487 68.681 47,693 60.0911 68.504 60.023 63.981 Resolution 640x350 720x400 640x480 848x480 Horizontal Frequency(KHz) Vertical Frequency(Hz) 852x480 31.468 37.861 31.469 37.927 31.469 35.000 37....

Page 18 - O p e r a t i o n; M e n u L a n g u a g e S e l e c t i o n; Turning on the TV just after installation; • Press the ON/OFF button on the TV to turn the TV on.

18 Plasma TV Operation O p e r a t i o n O p e r a t i o n - The menus can be shown on the screen in the selected language. First select your language. 1. Press the MENU button and then use D / E button to select the SPECIAL menu. 2. Press the G button and then use D / E button to select Language . ...

Page 19 - C h a n n e l M e n u O p t i o n s

Owner’s Manual 19 Operation - You can add or delete channels from the channel scan manually. 1. Use the D / E or NUMBER buttons to select the channel number you want to add or delete. 2. Press the MEMORY/ERASE button. 3. Use the MEMORY/ERASE button to select Memory or Erase . 4. Press the ENTER butt...

Page 20 - F a v o r i t e C h a n n e l s S e t u p; C h a n n e l M e n u O p t i o n s c o n t i n u e d

20 Plasma TV Operation - Favorite Channels is a convenient feature that lets you quickly scan up to 8 channels of your choice without having to wait for the TV to scan through all the in-between channels. 1. Press the MENU button and then use D / E button to select the CHANNEL menu. 2. Press the G b...

Page 21 - X D; Auto Color Temperature Control; C o l o r; Manual Color Temperature Control (; set to; Off; P i c t u r e M e n u O p t i o n s

Owner’s Manual 21 Operation - XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. - When selecting APC options (Clear, Optimum and Soft), XD is automatically change to On. 1. Press the MENU button and then use...

Page 22 - M a n u a l P i c t u r e C o n t r o l (; APC; s e t t o; F l e s h t o n e ( T V; P i c t u r e M e n u O p t i o n s c o n t i n u e d

22 Plasma TV Operation - You can adjust picture contrast, brightness, color, sharpness, and tint options to the levels you prefer. 1. Press the MENU button and then use D / E button to select the PICTURE menu. 2. Press the G button and then use D / E button to select the desired picture option ( Con...

Page 23 - D A S P; S o u n d M e n u O p t i o n s; B B E

Owner’s Manual 23 Operation 1. Press the DASP button repeatedly to select the appropriate sound setup as shown below. D A S P D A S P ( D i g i t a l ( D i g i t a l A u t o S o u n d P r o c e s s i n g ) A u t o S o u n d P r o c e s s i n g ) • You can also adjust DASP in the SOUND menu. • SRS TS...

Page 24 - B r o a d c a s t s S e t u p; DASP off; o p t i o n a n d b a l a n c e ); S o u n d M e n u O p t i o n s c o n t i n u e d

24 Plasma TV Operation 1. Press the MTS button repeatedly. S t e r e o / S A P S t e r e o / S A P B r o a d c a s t s S e t u p B r o a d c a s t s S e t u p • Select mono sound mode if the signal is not clear or in poor signal reception areas.• Stereo , SAP modes are available only if included on ...

Page 25 - i m e r M e n u O p t i o n s; i m e r S e t u p; function; A u t o C l o c k S e t u p

Owner’s Manual 25 Operation T T i m e r M e n u O p t i o n s i m e r M e n u O p t i o n s CHANNEL PICTURE SOUND TIMER SPECIAL SCREEN PIP/DW LOCK Prev. Menu Auto Manual Time zone Auto PBS Channel TV 2 Daylight Saving Auto Clock G Off timer On timer Auto off CHANNEL PICTURE SOUND TIMER SPECIAL SCREE...

Page 26 - A u t o O f; i m e r M e n u O p t i o n s c o n t i n u e d

26 Plasma TV Operation CHANNEL PICTURE SOUND TIMER SPECIAL SCREEN PIP/DW LOCK Prev. Menu On Off Clock Off timer On timer Auto off G A u t o O f A u t o O f f f - If set to on and there is no input signal, the TV turns off automatically after 10 minutes. 1. Press the MENU button and then use D / E bu...

Page 27 - K e y L o c k; S p e c i a l M e n u O p t i o n s; I S M ( I m a g e S t i c k i n g M i n i m i z a t i o n ) M e t h o d

Owner’s Manual 27 Operation K e y L o c k K e y L o c k - The TV can be set up so that it can only be used with the remote control. - This feature can be used to prevent unauthorized viewing by locking out the front panel controls. - This TV is programmed to remember which option it was last set to ...

Page 28 - S p e c i a l M e n u O p t i o n s c o n t i n u e d; X D D e m o

28 Plasma TV L o w P o w e r L o w P o w e r - Low power reduces the plasma display power consumption. 1. Press the MENU button and then use D / E button to select the SPECIAL menu. 2. Press the G button and then use D / E button to select Low power . 3. Press the G button and then use D / E button ...

Page 29 - C l o s e d C a p t i o n s; Using Closed Captions; FOLLOW ME; e x t

Owner’s Manual 29 Operation C l o s e d C a p t i o n s C l o s e d C a p t i o n s 2. An old, bad, or illegally recorded tape is being played.3. Strong, random signals from a car or airplane interfere with the TV signal. 4. The signal from the antenna is weak.5. The program wasn’t captioned when it...

Page 30 - S c r e e n M e n u O p t i o n s; A u t o

30 Plasma TV Operation S c r e e n M e n u O p t i o n s S c r e e n M e n u O p t i o n s A u t o A u t o A d j u s t m e n t A d j u s t m e n t - RGB (PC) mode only; This function doesn’t work for RGB-DTV mode.- Automatically adjusts picture position and minimizes image shaking.- After adjustment...

Page 31 - M a n u a l C o n f i g u r e ( R G B - P C m o d e o n l y ); S e l e c t i n g V G A; S e l e c t i n g X G A

Owner’s Manual 31 Operation CHANNEL PICTURE SOUND TIMER SPECIAL SCREEN PIP/DW LOCK Prev. Menu Auto config. ARC Position Manual config G Reset M a n u a l C o n f i g u r e ( R G B - P C m o d e o n l y ) M a n u a l C o n f i g u r e ( R G B - P C m o d e o n l y ) - If the image still isn’t clear a...

Page 33 - I n i t i a l i z i n g ( R e s e t t o o r i g i n a l f a c t o r y v a l u e ); S c r e e n M e n u O p t i o n s c o n t i n u e d

Owner’s Manual 33 Operation CHANNEL PICTURE SOUND TIMER SPECIAL SCREEN PIP/DW LOCK Prev. Menu To set Screen adj. ARC Cinema YNR Reset G 1. Press the MENU button and then use D / E button to select the SCREEN menu. 2. Press the G button and then use D / E button to select Reset . 3. Press the G butto...

Page 34 - L o c k M e n u O p t i o n s; Ratings for Movies previously shown in theaters:; P a r e n t a l L o c k S e t u p

34 Plasma TV Operation L o c k M e n u O p t i o n s L o c k M e n u O p t i o n s Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block pro-gram viewing based on the ratings sent by the broadcastingstation...

Page 35 - P I P; PIPCH- button to select a channel for; Main Picture Source

Owner’s Manual 35 Operation - PIP lets you view 2 different inputs pictures (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. - Double Window mode splits the screen into 2, allowing 2 picture sources to be shown on the TV sc...

Page 36 - y p e o f C o n n e c t o r D - S u b 9 - P i n M a l e; E x t e r n a l C o n t r o l D e v i c e S e t u p; R S - 2 3 2 C S e t u p; PC

36 Plasma TV External Control Device Setup No. Pin name 1 No connection 2 RXD (Receive data) 3 TXD (Transmit data) 4 DTR (DTE side ready) 5 GND 6 DSR (DCE side ready) 7 RTS (Ready to send) 8 CTS (Clear to send) 9 No Connection 1 5 6 9 2354678 RXD TXD GND DTR DSR RTSCTS TXD RXD GND DSR DTR CTSRTS PC ...

Page 37 - S e t I D; r a n s m i s s i o n / R e c e i v i n g P r o t o c o l; C o m m a n d R e f e r e n c e L i s t

Owner’s Manual 37 External Control Device Setup S e t I D S e t I D - Use this function to specify a monitor ID number. - Refer to ‘Real Data Mapping 1’. See page 37. • Baud rate :9600 bps (UART)• Data length : 8 bits• Parity : None * Use a crossed (reverse) cable. • Stop bit : 1 bit• Communication ...

Page 38 - * Real data mapping 1

38 Plasma TV External Control Device Setup 02. Input Select (Command2:b) (Main Picture Input) G To select input source for the TV. You can also select an input source using the TV/VIDEObutton on the TV's remote control. Transmission Data 0 : TV 1 : Video 12 : Video 23 : Component 1 4 : Component 25 ...

Page 39 - * Real data mapping 2

Owner’s Manual 39 External Control Device Setup 17. Treble (Command2:r) G To adjust treble. You can also adjust treble in the Sound menu. Transmission Data Min: 0 ~ Max: 64 • Refer to ‘Real data mapping 1’. See page 38. [k][r][ ][Set ID][ ][Data][Cr] Acknowledgement [r][ ][Set ID][ ][OK][Data][x] 09...

Page 40 - * Real data mapping 3

40 Plasma TV External Control Device Setup 21. Red Adjustment (Command2:v) G To adjust red in color temperature. Transmission Data Min: 0 ~ Max: 3C • Refer to ‘Real data mapping 3’ as shown right. [k][v][ ][Set ID][ ][Data][Cr] Acknowledgement [v][ ][Set ID][ ][OK][Data][x] 22. Green Adjustment (Com...

Page 41 - Picture Size Setting for Double Window

Owner’s Manual 41 External Control Device Setup 26. ISM Method (Command2:p) G To avoid having a fixed image remain on screen. Transmission Data 0: Normal 1: White wash 2: Orbiter3: Inversion [ j ][p][ ][Set ID][ ][Data][Cr] Acknowledgement [p][ ][Set ID][ ][OK][Data][x] 27. Low Power (Command2:q) G ...

Page 42 - H o w t o C o n n e c t; I R C o d e s

42 Plasma TV IR Codes G Connect your wired remote control to the Remote Control port on the Monitor. G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz G Configuration of frame G Repeat code G Lead code • 1st frame Low custom code Lead code High custom code Data code Data code...

Page 43 - Note

Owner’s Manual 43 IR Codes Code (Hexa) Function Note 0001020308C4C509101112131415161718190B98D65AD0BFD4C6D50E43444D52606163646271727B797677AF1E1A54550A3999 R/C ButtonR/C ButtonR/C ButtonR/C ButtonR/C Button (Power On/Off)Discrete IR Code (Only Power On)Discrete IR Code (Only Power Off)R/C ButtonR/C ...

Page 44 - P r o g r a m m i n g a c o d e i n t o a r e m o t e m o d e; P r o g r a m m i n g t h e R e m o t e; Press the MENU button to store the code.

44 Plasma TV Programming the Remote G The remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers.Note that the remote control may not control all models of other brands. P r o g r a m m i n g a c o d e i n ...

Page 45 - P r o g r a m m i n g C o d e s; V C R s

Owner’s Manual 45 Programming Codes P r o g r a m m i n g C o d e s P r o g r a m m i n g C o d e s V C R s V C R s C A C A T V T V AIWA 034 AKAI 016 043 046 124125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CU...

Page 46 - A u d i o; H D S T B

46 Plasma TV Programming Codes A u d i o A u d i o APEX DIGITAL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027JVC 012 LG 001 010 016 025 MAGNAVOX 013 MARANTZ 024 MITSUBISHI 002 NAD 023 ONKYO 008 017 PANASONIC 003 009 PHILIPS 013 PIONEER 004 026 PROCEED 021 PROSCAN 005 006 RCA 005 006 SAMSUNG 011 015...

Page 47 - r o u b l e s h o o t i n g C h e c k l i s t

Owner’s Manual 47 Troubleshooting Checklist No output from one of the speakers • Adjust Balance in the Sound menu. (Refer to p.24) Unusual sound from inside the TV • A change in ambient humidity or temperature may result in an unusual noise when the plasma display is turned on or off and does not in...

Page 48 - C l e a n i n g t h e S c r e e n; M a i n t e n a n c e

48 Plasma TV Maintenance 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe thescreen. 2. Make sure the excess water...

Page 49 - P r o d u c t S p e c i f i c a t i o n s; MODEL; S p e a k e r

Owner’s Manual 49 Specification P r o d u c t S p e c i f i c a t i o n s P r o d u c t S p e c i f i c a t i o n s • The specifications shown above may be changed without notice for quality improvement. MODEL RU-50PZ61 57.7 / 1465 33.3 /845.6 13.2 / 335 117.5 / 53.3 1366 x 768 (Dot) AC100-240V, 60H...

Page 51 - HOW SERVICE IS HANDLED:

Your LG Plasma TV will be repaired or replaced in accordance with the terms of this warranty, at LGE’s option, if itproves to be defective in material or workmanship under normal use, during the warranty period (“Warranty Period”)listed below, effective from the date (“Date of Purchase”) of original...

Page 52 - CUSTOMER INTERACTIVE CENTER NUMBERS:

P/N : 3828VA0470Q TO CONTACT THE LGE CUSTOMER SERVICE CENTER BY MAIL: LGE Customer Interactive Center P.O. Box 240007 201 James Record Road Huntsville, Alabama 35824 http://www.lgservice.com FOR SERVICE: Before you call for warranty service, check your operating guide – you may avoid a service call....