Page 2 - WARNING
2 206-4142 WA R N I N G : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulate...
Page 3 - Do not; Warning: To prevent fire or shock; Do not use this product near water or mois-; IMPORTANT SAFETY INSTRUCTIONS
3 206-4142 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufac- turer's instructions. 8. Do not ins...
Page 4 - Caution: Refer all servicing to qualified
4 206-4142 (Continued from previous page) 21. Damage Requiring Service Unplug this product from the wall power out- let and refer servicing to qualified service personnel under the following conditions: a. If the power-supply cord or plug is damaged.b. If liquid has been spilled, or objects have fal...
Page 5 - The apparatus with Class I construction must; PCS100R Installation on a Flat Surface
5 206-4142 (Continued from previous page) C. Circuit Overloading Consideration should be given to the con- nection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. D. Reliable Earthing Maintain reliable ear...
Page 6 - Table of Contents / Setup Checklist; Setup Checklist; Unpack the PCS100R Pro:CentricTM server unit and all accessories.; Table of Contents
6 206-4142 Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . 2Important Safety Instructions. . . . . . . . . . . . 3 – 5Table of Contents / Setup Checklist . . . . . . . . 6PCS100R Product Description . . . . . . . . . . . . 7Rear and Front Panel Overviews . . . . . . . . . . 8Rack Insta...
Page 7 - PCS100R Product Description; Features; Remote programming capability via Ethernet
7 206-4142 PCS100R Product Description The PCS100R Pro:Centric server is a stand-alone, remotely-controlled processor/ controller for the Pro:Centric system. This device can be used to capture data from an Internet source, assemble the data as display pages, and output the pages in DTV format over t...
Page 8 - Rear and Front Panel Overviews; Rear View
8 206-4142 Rear and Front Panel Overviews POWER 12V / 5A NETWORK SOFT WARE RESE T RS-232 MAC ADDRESS: 00:0C:63:33:00:0`1 RS-232 Port ASI Out NETWORK (Ethernet) Port SOFTWARE RESET Button Power Supply/Cord . . . . . . . . . ASI- OUT Disconnect Device The AC mains plug is used as the disconnect device...
Page 9 - Rack Installation; Installing the PCS100R in a Rack; Surge Protected Power Strip Requirements; also should be connected to this same surge protected power strip.
9 206-4142 Rack Installation Installing the PCS100R in a Rack 1. Carefully slide the chassis into a standard 19-inch equipment rack.2. Use all four mounting screws to secure the chassis to the rack (see diagram below).3. Refer to “Surge Protected Power Strip Requirements” below. Although power is no...
Page 10 - Rack-mount Considerations; A. Elevated Operating Ambient
10 206-4142 Surge Protected Power Strip To AC power source ASI-OUT AC I N ASI IN . . . . . . . . . SOFTWARE RESET NETWORK POWER 12V / 5A RS-232 PCS100R Power Connector Modulator ASI IN PCS100R ASI OUT 75 ohm BNC-to-BNC coaxial cable Modulator/Upconverter Power Supply/Cord PCS100R Power Supply/Cord D...
Page 11 - System Setup; Typical Setup Flow Chart for the PCS100R; VPN Server; VPN Network Connections Overview
11 206-4142 System Setup Combiner RF Coaxial Cable RF Cable ASI Out PCS100R IF Out QAM Modulator ASI In IF In RF Out DTV Upconverter Network Room Receiver Room Receiver Room Receiver RF Distribution System ASI Coaxial Cable Typical Setup Flow Chart for the PCS100R Refer to the following diagrams, an...
Page 12 - Typical System Installation; connection once power is applied in step 7.); equipment may be required to adjust the signal level.
12 206-4142 Typical System Installation (see also Typical Setup Flow Chart and VPN Network Connections Overview on page 11) 1. Connect a 75 ohm BNC-to-BNC coaxial cable between ASI OUT on the PCS100R and ASI IN on the modulator. Note: The BNC cable must be less than 30 feet (9.2 meters) in length. 2...
Page 13 - Troubleshooting / Specifications; Dimensions; Impedance at ASI Out jack:; Troubleshooting; connection is tight and secure.; Specifications
13 206-4142 Troubleshooting / Specifications Dimensions Height: 1.692 inches (42.977 mm) Width: 19.0 inches (482.6 mm) (for EIA standard 19-inch rack mount) Depth: 8.5 inches (215.9 mm) Weight: 2.70 pounds (1.22 kgrms) rack-only weight Environmental Storage Conditions Temperature: -20° to 70° Celsiu...
Page 14 - Document Revision History / Notes; Notes; Date
14 206-4142 Document Revision History / Notes Notes Document Revision History Date Description June 2010 Revision A: New document September 2010 Revision B: Specifications update January 2011 Revision C: System setup update November 2011 Revision D: Surge protected power strip requirements added Pro...
Page 15 - Open Source Software Notice
15 206-4142 The following GPL executables and LGPL libraries used in this product are subject to the GPL Version 2.0/LGPL Version 2.1 License Agreements: GPL EXECUTABLES: Linux kernel 2.6.33, LTIB 10.1.1, bash-2.05b, busybox-1.1.3, e2fsprogs-1.34, ethtool-3, gawk- 3.1.3, lrzsz_0.12.21, lzo-2.03, mtd...
Page 16 - LG PCS100R Pro:Centric Server Warranty
206-4142 Revision D Copyright 2011, LG Electronics U.S.A., Inc. Broadcast Products Welcome to the LG family! We believe that you will be pleased with your new PCS100R Pro:Centric Server. Please read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law. This warranty giv...