LG M2780D - Manuals

6 PREPARATION PR EP A R AT IO N BACK PANEL INFORMATION ■ This is a simplified representation of the back panel. The image shown may be somewhat different from your set. 1 7 8 9 10 11 12 13 2 3 4 5 6 13 13 13 M2080D / M2280D M2380D / M2780D M2080DF / M2280DF M2380DF / M2780DF M2080DN / M2280DN M2380D...

8 PREPARATION PR EP A R AT IO N STAND INSTALLATION ■ The image shown may be somewhat different from your set. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. Insert the Stand Base into the product. Use a Coin on the bottom of the ...

11 PR EP A R AT IO N DETACHING STAND ■ The image shown may be somewhat different from your set. 1 2 3 Place the set screen side down on a cushion or soft cloth. Detach the monitor to the Stand Base by turn- ing the screw to the left.Turn the screw by using a Coin . Pull the stand base. M2080D/M2280D...

14 PREPARATION PR EP A R AT IO N DETACHING STAND BODY ■ The image shown may be somewhat different from your set. ■ Remove the Stand Body in the same way as the following when using it as a Wall Hook. 1. Remove the screw 2 point.2. Pull the stand body. 3. Assemble the screw 2 point Screw M2080D / M22...

15 PR EP A R AT IO N WALL MOUNT : HORIZONTAL INSTALLATION For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installationinstructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation andSetup Guide. If you intend to mou...

16 PREPARATION PR EP A R AT IO N DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 10 cm on each side and from the wall. ■ The image shown may be somewhat different from your set. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm M2080D / M2280D M2380D ...

17 PR EP A R AT IO N POSITIONING YOUR DISPLAY SWIVEL STAND(Only M2780D / M2780DF) LOCATION ■ The image shown may be somewhat different from your set. Adjust the position of the panel in various ways for maximum comfort. ■ The image shown may be somewhat different from your set. * Tilt range -5° 10° ...

18 PREPARATION PR EP A R AT IO N KENSINGTON SECURITY SYSTEM - The product is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. - For detailed installation and use of the Kensington Security System, refer to the user’s...

19 EX TE R N A L E Q U IP M EN T S ET U P ANTENNA CONNECTION ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ■ For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied. Multi-family Dwellings /...

20 EXTERNAL EQUIPMENT SETUP EX TE R N A L E Q U IP M EN T S ET U P HD RECEIVER SETUP Connecting with a component cable ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. ■ The image shown may be somewhat different from your set. ► HDMI ...

21 EX TE R N A L E Q U IP M EN T S ET U P Connecting a set-top box with a HDMI cable Connect the digital set-top box to HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the SET Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) Select HDMI 1 or HDMI 2 input source usin...

22 EXTERNAL EQUIPMENT SETUP EX TE R N A L E Q U IP M EN T S ET U P Connect the digital set-top box to HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the SET. Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the SET. Turn on the digital set-top box.(Refer to the owner’s m...

23 EX TE R N A L E Q U IP M EN T S ET U P DVD SETUP Connecting with a component cable Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the SET. Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the SET. Turn on the DVD player , insert a DVD. S...

24 EXTERNAL EQUIPMENT SETUP EX TE R N A L E Q U IP M EN T S ET U P 1 OPTICAL DIGITAL AUDIO OUT ANTENNA / CABLE IN USB IN VIDEO VIDEO YP B P R LR AUDIO (MONO) L - AUDIO - R AUDIO IN (RGB/DVI) H / P AV IN2 (R) AUDIO (L ) AUDIO/ VIDEO Connecting with a Euro Scart cable Connect the Euro scart socket of ...

25 EX TE R N A L E Q U IP M EN T S ET U P Connecting the HDMI cable Connect the HDMI output of the DVD to the HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the SET Select HDMI 1 or HDMI 2 input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions....

26 EXTERNAL EQUIPMENT SETUP EX TE R N A L E Q U IP M EN T S ET U P VCR SETUP Connecting with a RF cable ■ To avoid picture noise (interference), allow adequate distance between the VCR and SET. Connect the ANT OUT socket of the VCR to the ANTENNA / CABLE IN socket on the SET. Connect the antenna cab...

27 EX TE R N A L E Q U IP M EN T S ET U P Connecting with a Euro Scart cable Connect the Euro scart socket of the VCR to the AV1Euro scart socket on the SET. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select AV1 input source using the INPUT button ...

28 EXTERNAL EQUIPMENT SETUP EX TE R N A L E Q U IP M EN T S ET U P 1 OPTICAL DIGITAL AUDIO OUT USB IN VIDEO YP B P R LR AUDIO AUDIO IN (RGB/DVI) H / P COMPONENT IN VIDEO (MONO) L - AUDIO - R AV IN 2 L R S-VIDEO VIDEO OUTPUT SWITCH ANT IN ANT OUT Connecting with a RCA cable Connect the AUDIO/VIDEO ja...

29 EX TE R N A L E Q U IP M EN T S ET U P INSERTION OF CI MODULE Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of SET as shown. For further information, see p.61 1 NOTE ► Check if the CI module is inserted into the PCMCIA card slot in the right di...

30 EXTERNAL EQUIPMENT SETUP EX TE R N A L E Q U IP M EN T S ET U P DIGITAL AUDIO OUT SETUP Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment. Set the “TV Speaker op...

31 EX TE R N A L E Q U IP M EN T S ET U P USB SETUP Connect the USB device to the USB IN jacks on the side of SET. After connecting the USB IN jacks, you use the USB function. (► p.113) 1 2 Memory Stick USB Cable

32 EXTERNAL EQUIPMENT SETUP EX TE R N A L E Q U IP M EN T S ET U P HEADPHONE SETUP Plug the headphone into the headphone socket. To adjust the headphone volume , press the + or - button. If you press the MUTE button, the sound from the headphone is switched off. 1 2 You can listen the sound through ...

33 EX TE R N A L E Q U IP M EN T S ET U P OPTICAL DIGITAL AUDIO OUT ANTENNA / CABLE IN USB IN VIDEO YP B P R LR AUDIO AUDIO IN (RGB/DVI) H / P COMPONENT IN VIDEO (MONO) L - AUDIO - R AV IN 2 L R VIDEO Connect the AUDIO / VIDEO jacks between SET and external equipment. Match the jack colours. (Video ...

34 EXTERNAL EQUIPMENT SETUP EX TE R N A L E Q U IP M EN T S ET U P PC SETUP When using the remote control, aim it at the remote control sensor on the SET. When connecting with a D-sub 15 pin cable Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC inpu t socke...

36 EXTERNAL EQUIPMENT SETUP EX TE R N A L E Q U IP M EN T S ET U P Connecting with an HDMI to HDMI cable Connect the HDMI output of the PC to the HDMI/DVI IN1 or HDMI/DVI IN2 jack on the SET. Turn on the PC and the SET. Select HDMI 1 or HDMI 2 input source using the INPUT button on the remote contro...

37 EX TE R N A L E Q U IP M EN T S ET U P BACK COVER FOR WIRE ARRANGEMENT Tie cables together with a cable management as shown in the illustration. M2080D / M2280D M2380D / M2780D M2080DN / M2280DN M2380DN / M2780DN M2080DF / M2280DF M2380DF / M2780DF M2080DB / M2280DB M2380DB

38 EXTERNAL EQUIPMENT SETUP EX TE R N A L E Q U IP M EN T S ET U P SUPPORTED DISPALY RESOLUTION HDMI/DVI - PC mode RGB[PC] mode Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 640 x 480 31.469 59.94 640 x 480 37.5 75 800 x 600 37.879 60.317 800 x 600 46.875 75 832 x 624 49.725 64.55 1024...

39 EX TE R N A L E Q U IP M EN T S ET U P HDMI/DVI - DTV mode Component mode Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720 x 480 31.469 31.5 59.94 60 720 x 576 31.25 50 1280 x 720 37.500 50 1280 x 720 44.96 45 59.94 60 1920 x 1080 33.7233.75 59.94 60 1920 x 1080 28.125 50.00 1920 x...

40 WATCHING TV / PROGRAMME CONTROL W AT C H IN G T V / P R O G R A M M E C O N TR O L REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the set. ꔰ (POWER) ENERGY SAVING TV/PC INPUT TV/RAD Switches the set on from standby or off to standby. Adjust the ...

42 WATCHING TV / PROGRAMME CONTROL W AT C H IN G T V / P R O G R A M M E C O N TR O L TURNING ON THE TV -When your TV is turned on, you will be able to use its features. PROGRAMME SELECTION VOLUME ADJUSTMENT Firstly, connect the power cord correctly.At this stage, the TV switches to standby mode. In...

43 W AT C H IN G T V / P R O G R A M M E C O N TR O L QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. ꔣ Aspect Ratio : Selects your desired picture for- mat.For Zoom Setting, ...

44 WATCHING TV / PROGRAMME CONTROL W AT C H IN G T V / P R O G R A M M E C O N TR O L ON SCREEN MENUS SELECTION AND ADJUSTMENT Your set's OSD (On Screen Display) may differ slightly from what is shown in this manual. SETUP SETUP Move Move Move OK OK OK OPTION PICTURE PICTURE LOCK AUDIO AUDIO IME USB...

45 W AT C H IN G T V / P R O G R A M M E C O N TR O L AUTO PROGRAMME TUNING Use this to automatically find and store all available programmes.When you start auto programming, all previously stored service information will be deleted.The maximum number of programmes that can be stored is 1000. But th...

46 WATCHING TV / PROGRAMME CONTROL W AT C H IN G T V / P R O G R A M M E C O N TR O L If you want to select the Antenna, AUTO PROGRAMME TUNING DVB-C Auto Tuning is a menu for users in countries that support DVB cable.Use this to automatically find and store all available programmes.When you start au...

49 W AT C H IN G T V / P R O G R A M M E C O N TR O L To watch DVB-C in the countries excluding Finland, Sweden, Denmark and Norway select '- -' as the Country in OPTION. You can select User mode or Full mode in Auto Tuning. The corresponding home frequency information may need to be changed when tu...

50 WATCHING TV / PROGRAMME CONTROL W AT C H IN G T V / P R O G R A M M E C O N TR O L CABLE DTV SETTING (IN CABLE MODE ONLY) The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country, and if number of supported Service O...

51 W AT C H IN G T V / P R O G R A M M E C O N TR O L MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. (For countries other than Finland, Sweden, Denmark and Norway & When selecting Antenna if Finland, Sweden, Denmark, Norway or “-...

53 W AT C H IN G T V / P R O G R A M M E C O N TR O L • Use NUMBER buttons to input a 4-digit password in Lock System ‘On’ . • L : SECAM L/L (France) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Afr...

54 WATCHING TV / PROGRAMME CONTROL W AT C H IN G T V / P R O G R A M M E C O N TR O L SETUP SETUP Move Move OK OK Auto TuningManual TuningProgramme EditSoftware Update : ON Diagnostics CI Information Auto TuningManual TuningProgramme EditSoftware Update : ON Diagnostics CI Information Manual Tuning ...

55 W AT C H IN G T V / P R O G R A M M E C O N TR O L • Press the MENU or EXIT button to close the menu window. • Press the BACK button to move to the previous menu screen. PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P ꕌꕍ button during TV vi...

56 WATCHING TV / PROGRAMME CONTROL W AT C H IN G T V / P R O G R A M M E C O N TR O L IN DTV/RADIO MODE IN TV MODE ■ Skipping a programme number ■ Deleting a programme ■ Moving a programme 1 1 1 2 2 2 3 3 3 Turn the programme number to blue. Turn the programme number to red. Turn the programme numbe...

57 W AT C H IN G T V / P R O G R A M M E C O N TR O L ■ Skipping a programme number ■ Auto Sort 1 1 2 3 Turn the programme number to blue. Release. Select a programme number to be skipped. Start Auto Sort. BLUE BLUE • When a programme number is skipped it means that you will be unable to select it u...

58 WATCHING TV / PROGRAMME CONTROL W AT C H IN G T V / P R O G R A M M E C O N TR O L SOFTWARE UPDATE Software Update means software can be downloaded through the digital terrestrial broadcasting system. SETUP SETUP Move Move OK OK Auto TuningManual TuningProgramme EditSoftware Update : ON Diagnosti...

59 W AT C H IN G T V / P R O G R A M M E C O N TR O L * When setting “Software Update” Occasionally, a transmission of updated digital software infor- mation will result in the following menu on the TV screen. Simple Update: for current update stream Schedule Update: for scheduled update stream When...

60 WATCHING TV / PROGRAMME CONTROL W AT C H IN G T V / P R O G R A M M E C O N TR O L DIAGNOSTICS This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned *MUX.This displays the s...

61 W AT C H IN G T V / P R O G R A M M E C O N TR O L • Press the BACK button to move to the previous menu screen. CI [COMMON INTERFACE] INFORMATION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module ...

62 WATCHING TV / PROGRAMME CONTROL W AT C H IN G T V / P R O G R A M M E C O N TR O L SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. • You may find some blue programmes. These have been set up to be skipped by auto pro- gramming...

63 W AT C H IN G T V / P R O G R A M M E C O N TR O L FAVOURITE PROGRAMME SETUP Favourite programme is a convenient feature that lets you quikly scan up to programmes of your choice without having to wait for the TV to scan through all the in-between programmes. ■ Selecting favourite programme ◄ Fav...

64 WATCHING TV / PROGRAMME CONTROL W AT C H IN G T V / P R O G R A M M E C O N TR O L INPUT LIST HDMI1/2, AV1/2, COMPONENT and RGB can be recognized by a detect pin and thus enabled only when an external device approves voltage.By using TV/RAD button, you can move from External Input to RF Input and...

65 EP G (E LE CT RO NIC P RO G RA M M E G UID E)( IN D IG ITA L M O DE ) Select a programme Switch on/off EPG This system has an Electronic Programme Guide (EPG) to help your navigation through all the possi-ble viewing options. The EPG supplies information such as programme listings, start and end ...

66 EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) EP G ( EL EC TR ON IC P RO GR AM M E G UID E)( IN D IG ITA L M OD E) Button Function in NOW/NEXT Guide Mode Button Function in 8 Day Guide Mode You can view a program being broadcasted and one scheduled to follow. RED RED GREEN BLUE BLUE YELLOW Y...

69 PIC TU R E C O N TR O L You can watch the screen in various picture formats: 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom . If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust ...

70 PICTURE CONTROL PIC TU R E C O N TR O L • 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio, gray bars will appear on both the left and right of the screen. • 14 : 9 You can view a picture format of 14:9 or a gen eral TV programme in the 14:9 mode. The...

71 PIC TU R E C O N TR O L This feature lets you adjust the picture quality of the original image.Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage.When you adjust the image to Low, Recom...

72 PICTURE CONTROL PIC TU R E C O N TR O L It reduces the TV’s power consumption.The default factory setting is adjusted to the comfortable level to be viewed at home.You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode. When adjusting En...

73 PIC TU R E C O N TR O L Vivid Strengthen the contrast, brightness, colour and sharpness for vivid picture. Standard The most general screen display status. Cinema Optimizes video for watching movies. Sport Optimizes video for watching sports events. Game Optimizes video for playing games. Picture...

74 PICTURE CONTROL PIC TU R E C O N TR O L Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture. You may use Contr...

75 PIC TU R E C O N TR O L You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture...

76 PICTURE CONTROL PIC TU R E C O N TR O L By segmenting categories, Expert 1 and Expert 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos. EXPE...

78 PICTURE CONTROL PIC TU R E C O N TR O L Expert Pattern (Off/Expert 1/Expert 2) ■ This is the pattern necessary for expert adjustment. ■ This function is enabled in "Picture Mode - Expert" when you watch DTV. Colour Filter (Off/Red/Green/Blue) ■ This is the function to filter the specific ...

79 PIC TU R E C O N TR O L Settings of the selected picture modes BACK to the default factory settings. PICTURE RESET Move Move OK OK PICTURE PICTURE ▲ • Brightness 50 • Sharpness 70 • Colour 50 • Tint 0 • Colour Temperature 0 • Advanced Control • Picture Reset Screen ▲ • Brightness 50 • Sharpness 7...

80 PICTURE CONTROL PIC TU R E C O N TR O L Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode.This function works in the following mode: RGB[PC] mode. <Vertical resolution : 768> <Vertical resolution : 900> <Vertical resolution : 9...

81 PIC TU R E C O N TR O L Auto Configure (RGB [PC] mode only) Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. Auto configure This function is for automatic adj...

82 PICTURE CONTROL PIC TU R E C O N TR O L 2. Using Auto Config. (Remocon) This function is available for RGB signals only. <1600 x 900 Resolution> <Others Resolution> <Others Resolution> <1920 x 1080 Resolution> Press Auto Config. M2080D / M2080DF / M2080DB / M2080DN M2280D ...

83 PIC TU R E C O N TR O L Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode: RGB[PC]. Move OK PICTURE ▲ • Brightness 50 • Sharpn...

84 PICTURE CONTROL PIC TU R E C O N TR O L Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode: RGB[PC]. Move OK PICTURE ▲ • Brightness 50 • Sharpness 70 • Colour 50 • Tint 0 • Colour Temperature 0 • Advanced Control • Picture Rese...

85 SO U N D C O N TR O L SOUND CONTROL 1 2 3 4 MENU Select Auto Volume. Select On or Off. Select AUDIO. • Press the MENU or EXIT button to close the menu window. • Press the BACK button to move to the previous menu screen. AVL automatically remains on the same level of volume if you change programme...

86 SOUND CONTROL SO U N D C O N TR O L 1 2 4 3 5 MENU Select Clear Voice II. Select Level. Select On or Off. Make desired adjustment. Adjustment for Clear Voice Level With selecting On Select AUDIO. • Press the MENU or EXIT button to close the menu window. • Press the BACK button to move to the prev...

87 SO U N D C O N TR O L 1 2 3 MENU Select Balance. Make desired adjustment. Select AUDIO. • Press the MENU or EXIT button to close the menu window. • Press the BACK button to move to the previous menu screen. You can adjust the sound balance of the speakers to preferred levels. BALANCE Move Move OK...

88 SOUND CONTROL SO U N D C O N TR O L 1 2 3 4 MENU • Press the MENU or EXIT button to close the menu window. • Press the BACK button to move to the previous menu screen. You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass . So...

89 SO U N D C O N TR O L Move Move Move OK OK OK AUDIO AUDIO AUDIO Auto Volume : Off Clear Voice II : Off ꕅ3 Balance 0 Sound Mode : Standard • Surround X : Off • Treble 50 • Bass 50 • Reset ▼ Auto Volume : Off Clear Voice II : Off ꕅ3 Balance 0 Sound Mode : Standard • Surround X : Off • Treble 50 • B...

90 SOUND CONTROL SO U N D C O N TR O L 1 2 3 MENU Select Reset. Initialize the adjusted value. Select AUDIO. • Press the MENU or EXIT button to close the menu window. • Press the BACK button to move to the previous menu screen. AUDIO RESET Move Move OK OK AUDIO AUDIO ▲ Sound Mode : Music • Surround ...

91 SO U N D C O N TR O L 1 2 3 4 MENU Select Digital Audio Out. Select Auto or PCM. Select AUDIO. • Press the MENU or EXIT button to close the menu window. • Press the BACK button to move to the previous menu screen. DIGITAL AUDIO OUT Move Move OK OK AUDIO AUDIO ▲ Sound Mode : Music • Surround X : O...

92 SOUND CONTROL SO U N D C O N TR O L 1 2 3 4 MENU Select TV Speaker. Select On or Off. Select AUDIO. • Press the MENU or EXIT button to close the menu window. • Press the BACK button to move to the previous menu screen. TV SPEAKERS ON / OFF SETUP Move Move OK OK AUDIO AUDIO ▲ Sound Mode : Music • ...

94 SOUND CONTROL SO U N D C O N TR O L I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears with the programme num- ber and station name. ■ Mono sound selection If the stereo signal is weak in stereo reception, you can switch ...

95 SO U N D C O N TR O L NICAM Reception (In Analogue Mode Only) Speaker Sound Output Selection If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the t...

96 TIME SETTING TIM E S ET TIN G The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. When you select a Time Zone city, the TV time is set by the time off...

97 TIM E S ET TIN G The Off time function automatically switches the TV to standby at a preset time.Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On time function i...

98 TIME SETTING TIM E S ET TIN G You do not have to remember to switch the TV off before you go to sleep.The sleep timer automatically switches the TV to standby after the preset time has elapsed. SLEEP TIMER SETTING • When you switch the TV off, the preset sleep timer is cancelled.• You can also ad...

99 O PT IO N S ET TIN • When France is selected for Country, password is not '0' , '0' , '0' , '0' but '1' , '2' , '3' , '4' . OPTION SETTING The installation guide menu appears on the TV screen when it is switched on for the first time. • If you want to change Language/ Country selection ON-SCREEN ...

100 OPTION SETTING O PT IO N S ET TIN The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played.Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selec...

101 O PT IO N S ET TIN This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio. When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Des...

102 OPTION SETTING O PT IO N S ET TIN (This menu is enabled only in Ireland. ) This function allow users to choose between MHEG (Digital Teletext) and Teletext if both exist at the same time.If only one of them exists, either MHEG or Teletext is enabled regardless of which option you selected. DATA ...

103 O PT IO N S ET TIN Selects a label for each input source. If you want to use HDMI-PC mode, you must set the input label to PC mode.(Refer to the below figure) INPUT LABEL 1 2 3 4 MENU Select Input Label. Select the source. Select the label. Select OPTION. OPTION OPTION OPTION Menu Language : Eng...

104 OPTION SETTING O PT IO N S ET TIN Select the power indicator on of off. Power indicator On - Normal Mode: Blue LED On.- Off Mode: LED Off Power indicator Off - Normal Mode: Blue LED Off.- Off Mode: LED Off POWER INDICATOR 1 2 3 4 MENU Select Power Indicator. Select On or Off. Select OPTION. OPTI...

105 O PT IO N S ET TIN Display the slide show to explain the various logo of this TV.It is not possible to use Demo Mode in Home Use mode. In Store Demo, Demo Mode is automatically set to On . Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset. The screen...

106 OPTION SETTING O PT IO N S ET TIN We recommend setting the TV to “Home Use” mode for the best picture in your home environment. “Store Demo” mode is an optimal setting for displaying at stores.. MODE SETTING 1 2 3 4 MENU Select Mode Setting. Select Store Demo or Home Use. Save. Select OPTION. OP...

107 O PT IO N S ET TIN This function initializes all settings.But the settings of ꕋ Day and ꕋ Night of the Picture Mode cannot be initialized. It is useful to initialize the product or when you move to other city or country.When the Factory Reset is completed, you must restart the Initializing setup...

108 PA RE NT AL C O NT RO L / RA TIN G S PARENTAL CONTROL / RATINGS Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset.When France is selected for Country, password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’,’2’,’3’,’4’.When France is selected for Country, password cannot be set as ‘0...

109 PA RE NT AL C O NT RO L / RA TIN G S RADIO Blocks any programmes that you do not want to watch or that you do not want your children to watch. This function is available in Lock System “On” . Enter a password to watch a blocked programme. BLOCK PROGRAMME LOCK Move OK Set PasswordLock System : ON...

111 PA RE NT AL C O NT RO L / RA TIN G S Save Enables you to block an input. It is available to use this function in Lock System ”On” . INPUT BLOCK LOCK LOCK Move Move OK OK Set PasswordLock System : ON • Block Programme • Parental Guidance • Input Block Key Lock : Off Set PasswordLock System : ON •...

112 PARENTAL CONTROL / RATINGS PA RE NT AL C O NT RO L / RA TIN G S LOCK LOCK Move Move OK OK Set PasswordLock System : Off • Block Programme • Parental Guidance • Input Block Key Lock : Off Set PasswordLock System : Off • Block Programme • Parental Guidance • Input Block Key Lock : Off Key Lock : O...

113 TO U SE A U SB D EV IC E TO USE A USB DEVICE WHEN CONNECTING A USB DEVICE When you connect a USB device, this pop up menu is displayed, automatically.“POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated or while the Bluetooth Headset is connected.Wh...

114 TO USE A USB DEVICE TO U SE A U SB D EV IC E Precautions when using the USB device ► Only a USB storage device is recognizable. ► If the USB storage device is connected through a USB hub, the device is not recognizable. ► A USB storage device using an automatic recognition programme may not be r...

115 TO U SE A U SB D EV IC E You can view photo files on USB storage device.The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.When you are watching the photo by the Photo List function, you can not change the picture mode. Moves to upper level...

116 TO USE A USB DEVICE TO U SE A U SB D EV IC E Photo List Page 2/3 Drive1 SGKIM001 1366x768, 125KB Up Folder Up Folder SG101 02/12/2010 SG102 02/12/2010 SGKIM001 02/12/2010 SGKIM002 02/12/2010 SGKIM003 02/12/2010 SGKIM004 02/12/2010 SG103 02/12/2010 SG104 02/12/2010 SG105 02/12/2010 SGKIM005 02/12...

117 TO U SE A U SB D EV IC E How to view photo ➩ 1 2 3 5 4 Select the desired photos. Show the Pop-Up menu. Select View. The selected photo is displayed in full size. Select the target folder or drive. • Press the BACK button to move to the previous menu screen. • Use the P ꕌꕍ button to navigation i...

119 TO U SE A U SB D EV IC E Using the Photo List function ◄ 1/17 ► Slideshow ꘡ BGM ꘡ Delete Q.MENU Option Hide ꘤ Choose Options. Set Photo View Set Video. Set Audio. ꕉ Previous Set Photo View. Slide Speed Music Folder RepeatRandom Fast ◄ ► On ◄ ► Off ◄ ► ... ꕉ Previous 1 1 2 2 Select Set Photo View...

120 TO USE A USB DEVICE TO U SE A U SB D EV IC E Set Audio. Sound Mode • Auto Volume• Clear Voice II• Balance 0 Standrd ◄ ► Off ◄ ► Off ◄ ► ꕉ Previous 1 1 2 Make appropriate adjustments. (Refer to p. 85 to 89) Show the Sound Mode, Auto Volume, Clear Voice II, Balance. Make appropriate adjustments.(R...

121 TO U SE A U SB D EV IC E Music List Page 2/3 Music SGKIM003 00:00/01:34 Up Folder Title Duration Up Folder SGKIM001 SGKIM002 SGKIM003 SGKIM004 SGKIM005 03:33 04:45 01:30 02:37 01:58 No Marked You can play music files on USB storage device.Purchased music files(*.MP3) may contain copyright restri...

122 TO USE A USB DEVICE TO U SE A U SB D EV IC E Music List Page 2/3 Music SGKIM003 00:00/01:34 Up Folder Title Duration Up Folder SGKIM001 SGKIM002 SGKIM003 SGKIM004 SGKIM005 03:33 04:45 01:30 02:37 01:58 No Marked Popup Menu Navigation Mark Page Change Exit MARK Music List Page 2/3 Music SGKIM003 ...

123 TO U SE A U SB D EV IC E ■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘ Screen Saver’ ? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a exten...

124 TO USE A USB DEVICE TO U SE A U SB D EV IC E Set Audio Play. RepeatRandom ◄ On ► Off ꕉ Previous ►When you select the Set Audio Play, 1 2 Make appropriate adjustments. Show the Set Audio Play. • When “ Off ” is selected in Repeat menu, replay will stop once the last file in the list finishes play...

125 TO U SE A U SB D EV IC E You can play movie files on a USB storage device.The movie list is activated once USB is detected. It is used when playing movie files on TV.Displays the movies in the USB folder and supports Play.Allows playback of all movies in the folder and user desired files.It is a...

126 TO USE A USB DEVICE TO U SE A U SB D EV IC E Page 2/3 Movie SGKIM002 640x480, 720KB Up Folder Title Duration Up FolderFavorite MusicSGKIM001SGKM002SGKIM001SGKIM001 01:34:1501:35:3001:30:20 No Marked Movie List Popup Menu Navigation Mark Page Change Exit MARK F i l e xtension name Video Decoder A...

127 TO U SE A U SB D EV IC E Page 2/3 Movie SGKIM002 640x480, 720KB Up Folder Title Duration Up FolderFavorite MusicSGKIM001SGKM002SGKIM001SGKIM001 01:34:1501:35:3001:30:20 No Marked Movie List Popup Menu Navigation Mark Page Change Exit MARK Page 2/3 Movie SGKIM002 640x480, 720KB Up Folder Title Du...

128 TO USE A USB DEVICE TO U SE A U SB D EV IC E Using the Movie List function, play Q.MENU Option Choose Options. Set Video Play. Set Video. Set Audio. ꕉ Previous 1 2 Select Set Video Play, Set Video or Set Audio. Show the PopUp menu.

129 TO U SE A U SB D EV IC E ► Picture Size: Selects your desired picture format during movie play. ► Audio Language & Subtitle Language : Changes the Language Group of the audio/subtitle during movie play. ► Sync : Adjusts the time synchronisation of the subtitle from -10 secs to +10 secs by st...

131 TO U SE A U SB D EV IC E Using the remote control ◄◄ / ►► When playing, repeatedly, press the REW( ◄◄ ) button to speed up ◄◄ (x2) → ◄◄◄ (x4) → ◄◄◄◄ (x8) → ◄◄◄◄◄ (x16) → ◄◄◄◄◄◄ (x32) . repeatedly, press the FF( ►► ) button to speed up ►► (x2) → ►►► (x4) → ►►►► (x8) → ►►►►► (x16) → ►►►►►► (x32). ...

132 TO USE A USB DEVICE TO U SE A U SB D EV IC E Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod . With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only Di...

133 TO U SE A U SB D EV IC E The purpose of deactivation is to allow deactivation of devices for users who have activated all the avail-able devices through the web server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but t...

134 TE LE TE XT TELETEXT Teletext is a free service broadcast by most TV stations which gives up-to- the-minute information on news, weather, television programmes, share prices and many other topics.The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard te...

135 TE LE TE XT Press the T.OPT button and then use ꕌꕍ button to select ꔻ menu. Display the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.AS with SIMPLE teletext mode, you can select a page by entering its three digit page numbe...

136 D IG ITA L T EL ET EX T DIGITAL TELETEXT The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc.This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should selec...

137 A PP EN D IX APPENDIX TROUBLESHOOTING The operation does not work normally. The remote control doesn’t work ■ Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the set. ■ Ensure that the batt...

138 APPENDIX A PP EN D IX The audio function does not work. Picture OK & No sound ■ Press the + or - button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? No output from one of the speakers ■ Adjust Bala...

139 A PP EN D IX No image is displayed. Power is on, power indictor is blue but the screen appears extremely dark. ■ Adjust brightness and contrast again. Does the ‘Invalid format’ message appear? ■ The signal from the PC (Video card) is out of the vertical or horizontal frequency range of the produ...

140 APPENDIX A PP EN D IX Screen color is abnormal. Screen has poor color res- oluion (16_colors). ■ Set screen color resolution to more than 24 bits (true color) Select control Pane → Display → Settings → Color Table menu in Windows. Screen color is unstable or mono color. ■ Check the connection st...

141 A PP EN D IX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new set.Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. A good way to keep the dust off your screen for a while is to wet a so...

142 APPENDIX A PP EN D IX ■ The specifications shown above may be changed without prior notice for quality improvement. PRODUCT SPECIFICATIONS M2080D / M2080DF / M2080DB / M2080DN LCD Panel S c r e e n Ty p e 508.5 mm Wide (20.0 inch) TFT (Thin Film Transistor)LCD (Liquid Crystal Display) PanelVisib...

146 APPENDIX A PP EN D IX IR CODES • This feature is not available for all models. Code (Hexa) Function Note 95 Energy Saving R/C BUTTON 08 POWER R/C BUTTON (POWER ON/OFF) 50 TV / PC R/C BUTTON 0B INPUT R/C BUTTON 79 RATIO R/C BUTTON F0 TV/RAD R/C BUTTON 45 Q.MENU R/C BUTTON 43 MENU R/C BUTTON AB GU...

147 A PP EN D IX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s func- tions externally.Connect the serial port of the control device to the RS-232C jack on t...

149 A PP EN D IX Communication Parameters ■ Baud rate: 9600 bps (UART) ■ Data length: 8 bits ■ Parity : None ■ Stop bit: 1 bit ■ Communication code: ASCII code ■ Use a crossed (reverse) cable. Transmission * [Command 1] : First command to control the TV. (j, k, m or x) * [Command 2] : Second command...

152 APPENDIX A PP EN D IX 15. Balance (Command: k t) ► To adjust balance. You can also adjust balance in the AUDIO menu. Transmission Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 153. [k][t][ ][Set ID][ ][Data][Cr] Ack [t][ ][Set ID][ ][OK/NG][Data][x] 16. Colour Temperature ...