LG GSA-4120B - Manuals - manualsarea.com

Page 2 - FCC COMPLIANCE STATEMENT; Note; English

i CAUTION : The laser used in the Super Multi DVD Drive can damage your eyes. Do not attempt to open the cover.To reduce the risk of electric shock, do not remove the cover (or back).There are no user-serviceable parts inside.Refer servicing to qualified service personnel. Use of controls or perform...

Page 3 - ii; Compact Disc ReWritable Ultra Speed

ii This unit uses CD-ROM discs with the following mark When you use this unit as a CD player, use compactdiscs with the following mark This unit uses CD-R discs with the following mark. This unit uses CD-RW discs with the following mark. This unit uses High Speed CD-RW discs with the following mark ...

Page 4 - Drive functions into one drive.; Package Items; countries by the Microsoft Corporation.; Item; - Internal Super Multi DVD Drive

1 Contents Features Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2System Environment . . . . . . . . ...

Page 5 - Important Precautions; Computer

2 Follow these precautions when handling the drive or discs.• Please take notice that the manufacturer of this equipment does not offer any warranty against data loss due to inappropriate installation or handling, or direct or indirect damages. • Please take notice that the manufacturer will bear no...

Page 6 - Software; Location and Function of Controls; Front Panel; Emergency Eject Hole; Digital Audio Output Connector; IDE Interface Connector; Rear Panel

3 ❏ Occasionally CD-R and CD-RW discs written by a CD-R/RW drive cannot be read by other CDdrives*. These unreadable discs may need to be read using the CD-R/RW drive they were created with * The disc written using the CD-R/RW drive might not be readable by CD-ROMs other than Multi-read compatible (...

Page 7 - Before installing the drive, please note the following points.; Removing the Computer Cover; Mounting the Drive; drive bay panel from the computer. Refer to the manual for the; NOTE; Jumper Setup; Before installation, set the jumper connector on the rear panel.; Installing the Drive; READ; NOTE; : If two peripheral devices with the same

4 Before installing the drive, please note the following points. ■ You will need the following:• A screw driver of a suitable size to fit the securing screws for the drive unit.• The manual for the computer, so you can find the mounting positions for the IDE controller cable. ■ Turn off all peripher...

Page 8 - Only one jumper should be installed on the jumper connector.; PC Connection; Name; Drive set as Master; Motherboard

5 NOTE : Only one jumper should be installed on the jumper connector. If more than one jumper is installed, the drive may malfunction or be damaged.Master/Slave setting is determined by jumper installation on the Jumper Connector.The following table shows the possible jumper settings. If you use CSE...

Page 9 - Beveled edge up; : Improper connection may damage; keyed and will only fit one way.

6 To Install as a Slave Drive To install the drive as a Slave, change the jumper setting on the rear panel to SL. Connecting the Power Connector Connect the power cable from the computer’s power supply to the socket on the drive unit,fitting the connector firmly into the power in connector. If there...

Page 10 - Device Drivers; Connecting the Sound Card; Please consult the following internet sites:; Add New Hardware; in Control Panel to let PC search again for new device.; Replacing the Computer Cover; Sound card

7 Device Drivers Connecting the Sound Card If the computer is using a sound card, the drive is connected to the sound card with anaudio cable. The supplied analog audio cable fits most sound cards or one can be purchased at a local computer store. W h e n u s i n g W i n d ow s 9 8 S E / 2 0 0 0 P r...

Page 11 - How to Use the Discs; Emergency Eject; Don’t use this feature; except; Turn the power to OFF.

8 How to Use the Discs When using CD-ROM discs, CD-R discs, DVD discs or CD-RW discs, don’t attach anystickers or labels to the discs. It could cause read and write errors, but data on the discmay be lost due to damage to the disc itself. DO NOT use non-standard discs. NON-standard discs may not pla...

Page 12 - Before Requesting Service; Before calling for service, check this list.; Troubleshooting

9 Before Requesting Service Before calling for service, check this list. • The drive doesn’t have power.• Is the power supply cable from the host computer plugged in?• Is the Power Connector to the drive securely attached? • The system doesn’t start.• Are the Primary and Secondary connections and th...

Page 13 - Mbytes; Specifications

CD/DVD/CD-RW DVD(Single/Dual), DVD-RW, DVD-R, DVD+RW, DVD+R, DVD+R Doublelayer, DVD- RAM, CD-Digital Audio & CD-Extra, CD-Plus, CD-ROM, CD-ROMXA-Ready, CD-I FMV, CD-TEXT, CD-Bridge, CD-R, CD-RW, Photo-CD(Single & Multi-Session), Video CD, DVD-VIDEO 12cm/ 8cm, standard size CD's E-IDE/ATAPI W...

Page 14 - Check the clear plastic on the center of the

Caution! The disc rotates at high speed in the drive unit.Use of worn, damaged, or non-standard CD-ROMdiscs can adversely affect the drive and cause thedisc to shatter or crush while in use.Disc crush can only occur when you use a damaged CD-ROM disc in the drive. It is an extremely rareoccurrence, ...