Page 2 - FCC COMPLIANCE STATEMENT; Note; receiver is connected.; English
i CAUTION : The laser used in the CD-RW/DVD-ROM drive can damage your eyes.Do not attempt to open the cover.To reduce the risk of electric shock, do not remove cover (or back).No user-serviceable parts inside.Refer servicing to qualified service personnel. Use of controls or performance of procedure...
Page 3 - ii; Compact Disc ReWritable Ultra Speed
ii This product is manufactured to comply with the radio interference requirements ofEEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. CAUTION - INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM. VARNING-OSYNLIG LASERSTRÄLNING NÄR DENNA DEL ÄR ÖPPNAD STRÄLEN ÄRFARLIG. CLASS 1 LASER PRODUCT...
Page 4 - DirectCD; Introduction; Contents
DirectCD TM v2.5b(s) 1 Introduction Installation Operation Appendix Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System Environment . . . . . . . . . . . . . . . ....
Page 5 - Thank you for; Package Items; Features; Ultra Speed Write/ReWritable discs; Item; - CD Recording Software
DirectCD TM v2.5b(s) Introduction 2 Thank you for purchasing this CD-RW/DVD- ROM Drive. Package Items Features • Enhanced-IDE (ATAPI) interface. • Power tray loading and ejection of disc. (The disc can also be ejected manually.) • Combination CD-R/RW and DVD-ROM Drive functions into one drive. • Sup...
Page 6 - Important Precautions
DirectCD TM v2.5b(s) Introduction 3 Precautions Installation Operation Important Precautions Follow these precautions when handling the drive or discs. • Please take notice that the manufacturer of this equipment does not offer any warranty against data loss due to inappropriate installationor handl...
Page 7 - System Environment
DirectCD TM v2.5b(s) Introduction 4 Computer Software ❏ Occasionally the CD-R and CD-RW discs written by the CD-R/RW drive cannot beread by other CD drives*. These unreadable discs may need to be read using theCD-R/RW drive on which they were written. * The disc written using the CD-R/RW drive might...
Page 8 - Location and Function of Controls; Digital Audio Output Connector; Power Connector
DirectCD TM v2.5b(s) Introduction 5 Front Panel Rear Panel Location and Function of Controls DIGITAL AUDIO ANALOG AUDIO INTERF ACE POWER D G 3940 1 +5 GND +12 2 C S MS L A R G L 1 2 3 4 5 1. Digital Audio Output Connector 2. Analog Audio Output Connector 3. Jumper Connector This jumper determines wh...
Page 9 - Installation; Installing the Drive; NOTE
DirectCD TM v2.5b(s) Installation 6 Before Installation Removing the Computer Cover Mounting the Drive Installing the Drive Before installing the drive, please note the following points. ■ You will need the following: • A screw driver of a suitable size to fit the securing screws for the drive unit....
Page 10 - : If two peripheral devices with the same settings are both con-; Only one jumper should be installed on the jumper connector.; Name; Drive set as Master
DirectCD TM v2.5b(s) Installation 7 Jumper Setup Before installation, set the jumper connector on the rear panel.The drive can be connected as the Master or Slave on an EIDE (ATAPI)interface. When several (up to four) EIDE devices are connected, eachmust be set in a unique way. Specific knowledge of...
Page 11 - A hard disk is normally installed as the Primary Master on the
DirectCD TM v2.5b(s) Installation 8 PC Connection To Install as a Master Drive The CD-RW/DVD-ROM drive connects to the motherboard of the hostcomputer using an IDE interface cable. You may connect the CD-RW/DVD-ROM Drive as a Slave or Master device, depending on your computer. NOTE : A hard disk is ...
Page 12 - Primary connector; Beveled edge up; : Improper connection may damage the drive and void the
DirectCD TM v2.5b(s) Installation 9 To Install as a Slave Drive Connecting the Power Connector To install the drive as a Slave, change the jumper setting on the rearpanel to SL. DIGITAL ANALOG INTERFACE POWER D R C S MS L A G L G 39 1 +5 +12 GND 40 2 AUDIO AUDIO Master drive(Booting hard disk) Slave...
Page 13 - : Generally, the IDE connector is keyed and will only fit one way.; Sound card
DirectCD TM v2.5b(s) Installation 10 Connecting the Interface Connector Connecting the Sound Card Replacing the Computer Cover Connect the 40-pin IDE cable to the back of the CD-RW/DVD-ROMDrive, making sure the coloured (red) stripe on the IDE cable isconnected to pin 1 on the CD-RW/DVD-ROM drive. P...
Page 14 - Device Drivers; Add New Hardware
DirectCD TM v2.5b(s) Installation 11 For Windows 95/98/2000/ME/ XP Users For Windows NT Workstation Ver.4.0 Users Device Drivers When using Windows 95/98/2000/Me/XP or Window NT WorkstationVer.4.0, no special device driver is required.Your system, upon Power On and bootup after installing and connec...
Page 15 - Operation; How to Use the Discs
DirectCD TM v2.5b(s) Operation 12 Emergency Eject How to Use the Discs When using CD-ROM discs, CD-R discs, DVD discs or CD-RW discs,don’t attach any stickers or labels to the discs. Using discs with themattached not only causes read and write errors, but data on the disc maybe lost due to damage to...
Page 16 - Appendix; Troubleshooting; Before calling for service, check this list.; Please Note; : Since this product supports Region Playback Control
DirectCD TM v2.5b(s) Appendix 13 Before Requesting Service Troubleshooting Before calling for service, check this list. • The drive doesn’t have power.• Is the power supply cable from the host computer plugged in?• Is the Power Connector to the drive securely attached? • The system doesn’t start.• A...
Page 17 - Specifications
14 Specifications The drive’s appearance and specifications may change without prior notice. CD/DVD/CD-RW CD-ROM, CD-ROM XA, Audio CD, Mixed Mode (Audio andData Combined), CD-I FMV, Video CD, Photo CD (Singleand Multi -Session), CD-Plus/CD-Extra, CD-Text DVD-Single/Dual, DVD-R/RW, DVD+R/RWCD-ROM, CD...