Page 3 - Table of Contents
Microboards CopyWriter Live 3 Table of Contents Introduction ....................................................................................................................... 5 What’s Included:........................................................................................................
Page 4 - Important Safety Instructions
Microboards CopyWriter Live 4 Important Safety Instructions • Read the User’s Manual completely • Observe all warnings • Do not connect or disconnect the power cord when your hands are wet • Keep unit and power cord aware from any heat source, such as radiators, stoves, or heat registers. • Do not a...
Page 5 - Introduction
Microboards CopyWriter Live 5 Introduction The CopyWriter Live combines the flexibility of cassette tapes with the quality and longevity of CDs, in one low-cost, easy to use unit. You can record from practically any audio source, including live feed from a microphone, a cassette deck, a mixer and ma...
Page 6 - Controls
Microboards CopyWriter Live 6 Controls 1) Left CD Recorder Drive 2) Eject for Left CD Recorder Drive 3) Right CD Recorder Drive 4) Eject for Right CD Recorder drive 5) Power Button 6) Disc Change Button 7) Yes/Setup Button 8) No Button 9) Volume Up 10) Volume Down 11) Input Button 12) Play Mode Butt...
Page 7 - Connections; Important Note; connecting or disconnecting any cables.
Microboards CopyWriter Live 7 Connections Important Note : Make sure the power is turned off to the CopyWriter Live system when connecting or disconnecting any cables. Back Panel: XLR, RCA Output, RCA Input 1, and Power Input connections can be made to the XLR connection on the back, or to the RCA I...
Page 8 - Recording Procedure for Audio CD; Gap
Microboards CopyWriter Live 8 Rack Mount Installation To mount the rack mount brackets on your CopyWriter Live system, please follow these steps: 1) If you system is turned on, turn off power and unplug the power cord from the back of the system. 2) Turn the system over and remove the four feet from...
Page 9 - Playing a Disc
Microboards CopyWriter Live 9 If your audio source volume is too low, the meter may show little or no activity. In that case, you should increase your input volume by pressing the Vol Up button. If your audio source volume is too high, the meter will indicate this by displaying an asterisk ( * ) as ...
Page 10 - Input
Microboards CopyWriter Live 10 Copying a Disc To copy a disc, all you need to do is place a blank disc in one drive and the master disc in the other drive. It does not matter which drive contains the master and which drive contains the blank. Press the Disc Copy button on the CopyWriter Live front p...
Page 12 - Beep
Microboards CopyWriter Live 12 Track Extraction This menu option allows you to extract tracks from one master and burn them to a blank disc. To use this feature, follow the directions below: 1. Press Yes/Setup at the Track Extraction menu selection in the Setup menu to begin. 2. The display will rea...
Page 13 - Auto Track Index; Gap Size
Microboards CopyWriter Live 13 In the Setup menu, press the No button until System Update is selected. Press the Yes/Setup button and the left drive will eject, prompting you to place the firmware disc in the drive with the message Insert Program Disc . Place the disc in the drive and close the tray...
Page 14 - Troubleshooting
Microboards CopyWriter Live 14 Troubleshooting Playback is not appearing on the screen. Confirm the RCA connections are correct. No Audio playback Confirm the RCA connections are correct. Check the playback volume and make sure it is not too low. Disc will not play back on other player Confirm the r...
Page 15 - Contact Information; Technical Specifications; Advanced Features
Microboards CopyWriter Live 15 Contact Information For technical questions or support issues, contact Microboards Technology technical support: United States PH: 952-556-1639 FAX: 952-556-1628 [email protected] www.microboards.com Europe PH: +44 (0) 845 230 7800 www.microboards.co.uk Japan PH:...