LG AR702TS - Manuals - manualsarea.com

Page 2 - CAUTION concerning the Power Cord; CAUTION

2 This lightning flash with arrowhead symbolwithin an equilateral triangle is intended toalert the user to the presence of noninsulated dangerous voltage within theproduct’s enclosure that may be of sufficientmagnitude to constitute a risk of electricshock to persons. The exclamation point within an...

Page 3 - Contents

3 Contents Introduction . . . . . . . . . . . . . . . . .4-11 Before use . . . . . . . . . . . . . . . . . . . . . . . . .4Before connection . . . . . . . . . . . . . . . . . . .4Symbol Used in this Manual . . . . . . . . . . . .4Required cables . . . . . . . . . . . . . . . . . . . . .4Front Panel ...

Page 4 - Required cables; Introduction

4 Before use • To ensure proper use of this product, please read this owner’s manual carefully and keep this manualin an easily accessible place for future reference. • This manual provides information on the operation and maintenance of your unit. Should the unitrequire service, contact an authoriz...

Page 5 - MIC IN; Front Panel

5 1. POWER ( ) Sets the unit to On and Standby. 2. INPUT SELECT Select the input source.Turn this knob until the input source you wantappears in the display window. 3. AUDYSSEY (2EQ) LED indicator Lights up when Audyssey 2EQ is active. 4. DISPLAY Displays various information about the currentlyselec...

Page 6 - Rear Panel

6 1. HDMI IN 1/2 Connect the component with HDMI output. 2. HDMI OUT Connect a TV or component with HDMI input. 3. VCR IN/VCR REC. OUT Connect a VCR. 4. TV/STB IN Connect a TV, satellite tuner or set-top box. 5. DVD IN Connect a DVD player to DVD IN jacks. 6. CD IN Connect a CD player or Super Audio...

Page 7 - Speaker indicators; Display window; Active Subwoofer

7 1. SLEEP indicator Lights up when the Sleep function has been set. 2. HDMI indicator Lights up when the HDMI function has been set. 3. Listening mode & format indicators These indicators show the currently selectedlistening mode and the format of digital inputsignals. 4. TUNED indicator Lights...

Page 8 - About the remote control modes; Use the buttons supported by that mode to; RECEIVER Mode; Remote Control

8 Remote control operation range Point the remote control at the remote sensor andpress the buttons.• Distance: About 23 ft (7 m) from the front of the remote sensor • Angle: About 30° in each direction in front of the remote sensor Remote control battery installation Remove the battery cover on the...

Page 10 - DVD Mode

10 DVD Mode To set the remote control to DVD mode, pressDVD. 1. POWER ( ) Switches the unit ON and OFF. 2. STOP ( x x ) Stops playback. PLAY ( B ) Starts playback. PAUSE( X X )/STEP Pauses playback temporarily. Press this buttonrepeatedly to play Frame-by-Frame. REPEAT Repeats chapter, track, title ...

Page 11 - VCR Mode; TV Mode; To set the remote control to TV mode, press TV.; Setting Remote Control Codes for LG TV

11 VCR Mode To set the remote control to VCR mode, pressVCR. 1. POWER ( ) Switches the unit ON and OFF. 2. STOP ( x x ) Stops playback. PLAY ( B ) Starts playback. PAUSE( X X )/STEP Pauses playback temporarily. Press this buttonrepeatedly to play Frame-by-Frame. SCAN ( b bb b / B BB B ) Searches bac...

Page 12 - Connecting components with digital audio output jacks; Installation

12 Connecting components with digital audio output jacks Connecting a DVD player (or Digital device), TV monitor or satellite tuner (orSet top box etc.) 1. Connect the audio jacks. For details of the required cables, see the page 4. Notes • You can also connect the device to OPTICAL IN 3 jack on the...

Page 13 - Select the input source to play the component.; TV monitor

13 2. Connect the video jacks. For details of the required cables, see the page 4.The following illustration shows how to connect a TV or satellite tuner (Set top box, etc) and a DVD playerwith COMPONENT VIDEO (Y, C B /P B, C R /P R ) output jacks. 3. Select the input source to play the component. F...

Page 14 - Connecting components with analog audio jacks; Connecting audio components; Connect the audio jacks with analog audio cable.; Connect the video jacks with composite video cable.

14 Connecting components with analog audio jacks Connecting audio components 1. Connect the audio jacks with analog audio cable. For details of the required cables, see the page 4. 2. Connect the video jacks with composite video cable. For details of the required cables, see the page 4. 3. Select th...

Page 15 - Connecting a camcorder or game console

15 Connecting a camcorder or game console 1. Connect the audio and video jacks. For details of the required cables, see the page 4. 2. Connect the unit’s MONITOR OUT jack to the TV’s VIDEO IN jack with composite video cable. For details of the required cables, see the page 4. 3. Select the input sou...

Page 16 - Connecting PC, Portable device, or USB device; Select the input source to play the component after connecting.

16 Connecting PC, Portable device, or USB device For details of the required cables, see the page 4. Select the input source to play the component after connecting. - For details, see the page 25. PC-LINK Connection (P) Connect the unit’s PC-LINK jack to the corresponding jack of PC with USB cable. ...

Page 17 - Connecting video components for Playback

17 Installation Connecting video components for Playback 1. Connect the audio jacks. For details of the required cables, see the page 4. 2. Connect the video jack and then connect your TV to the MONITOR OUT jack. You can watch the video from the selected input. 3. Select the input source to play the...

Page 18 - Connecting video components for Recording; Playback from the Recording VCR; Recording VCR

18 Connecting video components for Recording This section explains how to connect a VCR for recording from a TV or another VCR. 1. Connect the unit’s VCR REC. OUT jack to a video input on the recording VCR. 2. Connect the unit’s VCR REC. OUT L/R jacks to an audio input L/R on the recording VCR. 3. C...

Page 19 - Connecting TV or components with HDMI jack; HDMI compatible TV

19 Installation Connecting TV or components with HDMI jack HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easyall- digital output to an HDMI or DVI-equipped TV. Connection to an HDMI TV requires an HDMI cable while connection a DVI-equ...

Page 20 - Connecting the antennas

20 Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna. Notes • To prevent noise pickup, keep the AM Loop antenna away from the unit and other components. • Be sure to fully extend the FM wire antenna. • After connecting the FM wire antenna, keep it as horizontal as poss...

Page 21 - Connecting speakers; Front left and right speakers

21 Installation Connecting speakers The unit allows you to use 6.1 channel system. The ideal surround speaker system for this unit is 6-speaker systems, using front left and right speakers, acenter speaker, surround left and right speakers,surround center speaker, and a subwoofer. You can enjoy high...

Page 22 - Speaker System Connection; Connecting speaker wire; Surround center

22 Speaker System Connection For the best surround sound, you should connect 6 speakers and/or a powered subwoofer. Connect the your front, center, surround, surround center speakers, and subwoofer by using the speaker wires. Using a suitable cable, connect the SW (PRE OUT) to an input on optional p...

Page 23 - Turning On the unit; Plug the power cord into an AC wall outlet.; Using Headphones; Connect the speaker setup microphone to the; Operation

23 Operation Turning On the unit Before connecting the power cord, connect all yourspeakers and AV components. 1. Plug the power cord into an AC wall outlet. 2. Press the POWER ( or ) button. The unit turns on, the display window lights up. To turn off the unit, press the POWER ( or ) button. The un...

Page 25 - Selecting the input source; To mute the sound

25 Operation Selecting the input source This section explains how to select the input source(i.e., the AV component that you want to listen to orwatch). 1. Press POWER ( or ) to turn the unit on. 2. Select a source by rotating the INPUT SELECT on the front panel. The selected source appears in the d...

Page 26 - Switching the audio signal; Switching the video signal

26 Switching the audio signal This section explains how to switch the audio input/output signal about each function mode. (O: Active, X: Inactive) Note The VCR REC. audio output is outputted only when analog audio input is selected on each function mode. Switching the video signal This section expla...

Page 27 - Rotate the INPUT SELECT on the front panel; Skip; Display

27 Operation Playing media files using theUSB feature You can enjoy the media files such as image files(JPEG), video files and Music files (MP3/WMA) savedin an MP3 player or USB memory by connecting thestorage device to the USB port of this unit. Basic Operation 1. Rotate the INPUT SELECT on the fro...

Page 28 - Listening to FM/AM radio; Automatic tuning; Manual tuning; Presetting radio stations; Rotate INPUT SELECT to select tuner (FM or; Tune in the station that you want to preset; To clear all the stored stations

28 Listening to FM/AM radio You can listen to FM and AM broadcasts through thebuilt-in tuner. Before operation, make sure you haveconnected the FM and AM antennas to the unit. Automatic tuning 1. Rotate INPUT SELECT to select tuner (FM or AM).Or select TUNER with the remote control toselect tuner (F...

Page 29 - Setting the Display Brightness; repeatedly to select the required sleep time.; Displaying Source Information; * Interpreting Surround Channel values; A B C

29 Operation Setting the Display Brightness You can adjust the brightness of the display window. Press RECEIVER, and then press DIMMER on theremote control repeatedly. The brightness of the display window is on/off. Using the Mute Function You can temporarily mute the output of the unit. Press RECEI...

Page 30 - Selecting setup menu; Setup configuration

30 Selecting setup menu By using the Setup menu, you can make variousadjustments to items such as sound. Setup configuration General operation of setup menu 1. Press RECEIVER, and then press SETUP. The Setup menu appears in the display window.The default setting is . 2. Use b b / B B to select the d...

Page 31 - CENTER

31 Operation 2. SPK TYPE (Setting speaker type) You can set the size of the speakers connected to thisunit. FRONT LR (FRONT LEFT/RIGHT) Set the FRONT L/R speaker to LARGE or SMALL. • LARGE : If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”. Normally, sel...

Page 33 - LOAD INIT; Enjoying the listening mode; SURROUND mode

33 Operation 8. LOAD INITIAL This procedure can be used to initialize settings youhave made to their factory. LOAD INIT • NO : The unit does not initializes settings you have to the made to their factory default settings. • YES : The unit initializes settings you have to the made to their factory de...

Page 35 - BYPASS; About Listening mode

35 Operation Function Buttons RCA/TUNER/spdif/HDMI/USB/ PC-LINK/Portable BYPASS SURROUND DSP ENHANCER Listeningmode Signal Channels Front LFront R About Listening mode The following table lists all the listening modes and shows which modes can be selected for each input signalformat.(O: Active, X: I...

Page 36 - Adjusting the speaker level; TEST TONE; Adjusting the tone control

36 Adjusting the speaker level You can adjust the level of each speaker. 1. Press RECEIVER, and then press SPK LEVEL. 2. Use v v / V V / b b / B B to adjust the level of each speaker. For details, see “5. SPK LEVEL (Setting speakerlevel)” on the page 32. To cancel it, press SPK LEVEL again. TEST TON...

Page 37 - repeatedly to select:; Storing the settings

37 Operation Using the NIGHT function(Dolby Digital only) With the NIGHT function, you can reduce the dynamicrange of Dolby Digital material so that you can stillhear quiet parts even when listening at low volumelevels—ideal for watching movies late at night whenyou don’t want to disturb anyone. 1. ...

Page 38 - Dolby Pro Logic II MOVIE; Mini Glossary for Audio Stream & Surround mode; Reference

38 Dolby Digital EX Dolby Digital EX creates 6 full-bandwidth outputchannels from 5.1-channel sources. This is doneusing a matrix decoder that drives three surroundchannels from the two in the original recording. Forbest results, Dolby Digital EX should be used withmovies soundtracks recorded with D...

Page 40 - Troubleshooting

40 Check the following guide for the possible cause of a problem before contacting service. PROBLEM No power. No sound. No sound from the surround speakers. No sound from the(front) center speaker. No sound from the surround centerspeakers. Stations cannot bereceived. Preset stations cannotbe receiv...

Page 41 - Specifications; General; FM

41 Reference Specifications General Power supply Refer to main label. Power consumption 130 W Net Weight 4.94 kg External dimensions 430 x 150 x 300 mm (W x H x D) Operating conditions Temperature: 5°C to 35°C Amplifier Frequency response 10 - 22000 Hz Signal-to-noise ratio More than 80 dB (Analog :...

Page 42 - Speaker

42 Speaker Front Speaker Center speaker Surround Speaker ( SR72TT-F ) ( SR72TT-C ) ( SR72TT-F ) Type Impedance 8 Ω 8 Ω 8 Ω Frequency Response 40 - 20000 Hz 80 - 20000 Hz 40 - 20000 Hz Sound Pressure Level 83 dB/W (1m) 81 dB/W (1m) 83 dB/W (1m) Rated Input Power 140 W 140 W 140 W Max. Input Power 280...

Page 43 - Front Speaker

43 Reference Front Speaker Center speaker Surround Speaker ( SR72BR-L ) ( SR72BR-B ) ( SR72BR-S ) Type Impedance 8 Ω 8 Ω 8 Ω Frequency Response 80 - 20000 Hz 80 - 20000 Hz 100 - 20000 Hz Sound Pressure Level 81 dB/W (1m) 81 dB/W (1m) 81 dB/W (1m) Rated Input Power 70 W 70 W 70 W Max. Input Power 140...