LG 98LS95A-5B - Manuals

5 ASSEMBLY AND PREPARATION ENGLISH • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of counterfeit components. CAUTION • The accessories supplied with your product may vary depending upon the model. • P...

6 ASSEMBLY AND PREPARATION ENGLISH Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Cable Holders/ Ca...

7 ASSEMBLY AND PREPARATION ENGLISH Parts and Buttons No. Description 1 Adjusts up and down. 2 Moves left and right. 3 Displays the current signal and mode. 4 Accesses the main menus, or saves your input and exits the menus. 5 Change the input signal. 6 Turns the power on or off. IR&LIGH T SENSO ...

8 ASSEMBLY AND PREPARATION ENGLISH Connecting the Speakers - For certain models only. 1 Connect an input signal cable before installing the speakers. 3 Connect the speaker cables noting the correct polarity. Use cable holders and cable ties to organize the speaker cables. 2 Mount the speakers by usi...

9 ASSEMBLY AND PREPARATION ENGLISH Connecting Wi-Fi Dongle 1 Attach the Velcro tape provided with the Wi- Fi dongle to the back of the set. 2 Connect the Wi-Fi dongle and the set using a USB cable and then attach the dongle to the set before using. Connecting IR and Light Sensor When you connect the...

10 ASSEMBLY AND PREPARATION ENGLISH Connecting the Eye-Bolt Bracket The eye-bolt bracket is designed to be used to lift the set up. Attach the bracket to the product using the two screws provided. Installing in Landscape Position Installing in Portrait Position

11 ASSEMBLY AND PREPARATION ENGLISH Attaching the Detachable Logo Use one screw, inserted from behind, to attach the detachable logo to the monitor. You can position the logo according to the monitor’s direction. When the monitor is in the horizontal position When the monitor is in the vertical posi...

12 ASSEMBLY AND PREPARATION ENGLISH How to Install the Guide Bracket Attach the media player to the guide bracket with 4 fixing screws.

13 ASSEMBLY AND PREPARATION ENGLISH Installing on a Wall For proper ventilation, allow a clearance of 10 cm (3.9 inches) on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. To ins...

14 REMOTE CONTROL ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly.To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels insid...

16 MAKING CONNECTIONS ENGLISH MAKING CONNECTIONS Connecting to a PC The illustrations may differ from the actual accessories. Some of the cables are not provided.This monitor supports the Plug & Play* feature.* Plug & Play: a feature that enables a PC to recognize devices attached by the use...

19 MAKING CONNECTIONS ENGLISH External Device Connection Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.The illustrations may differ from the actual accessories. Some of the cables are not provided. For the best picture and sound quality, connecting ext...

20 ENTERTAINMENT ENGLISH Using the Input List Remote Control (HOME) Input Mode Description HDMI1 You can watch content on a PC, DVD player, Digital set-top box, and other high definition devices. HDMI2DISPLAYPORTDVICOMPONENT ENTERTAINMENT Using My Media Connecting USB storage devices Connect a USB s...

22 ENTERTAINMENT ENGLISH Files Supported by My Media Supported External Subtitle Format • *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX) To use Select Play, Remote Control (HOME) Photos/ Videos/ Music • Play Selection: plays back selected content...

25 ENTERTAINMENT ENGLISH Viewing Videos Play video files on display. All of the saved video files are shown in your display. To play video files on display, Remote Control (HOME) Videos Tips for Playing Video Files • Some subtitles created by users may not work properly. • The video and subtitle fil...

26 ENTERTAINMENT ENGLISH Viewing Photos The displays on the screen may differ from the model. Viewing image files Remote Control (HOME) Photos Information To check the basic information of Signage Remote Control (HOME) You can see the basic information on Signage.You can also switch to Smart Energy ...

27 ENTERTAINMENT ENGLISH Listening to Music Viewing music files Remote Control (HOME) Music • Files with unsupported extensions are not displayed. • If a file is invalid, a broken image and the message ‘Unrecognizable file’ are displayed. • Damaged music files are displayed as 00:00 and will not be ...

28 ENTERTAINMENT ENGLISH Settings You must register your product to play a DRM-protected DivX video. In order to register/deregister purchased or rented DivX ® VOD contents Remote Control (HOME) Settings DivX ® VOD In order to play purchased or rented DivX ® VOD contents, you should register your de...

29 ENTERTAINMENT ENGLISH 2 Press the red ON button on the remote control to assign the PICTURE ID . 1 Assign the Set ID to the installed monitors as shown below . 3 Assign the Set ID to the selection of your choice. • A set with a different Set ID from the Picture ID cannot be controlled by IR signa...

30 USER SETTINGS ENGLISH User Settings Main Menu Settings Quick Settings Configures frequently used settings menus. To turn your monitor on or off automatically Remote Control (SETTINGS) Quick On Timer/Off Timer You can set the On/Off Timer for your monitor. If you do not want to set the On/Off Time...

31 USER SETTINGS ENGLISH Picture Setting To Select Picture Mode Remote Control (SETTINGS) Picture Picture Mode Select the picture mode that is best suited to the video type. • Vivid: adjusts the video image for a retail environment by enhancing the contrast , brightness , and sharpness . • Standard:...

35 USER SETTINGS ENGLISH Sound Settings To select a Sound Mode Remote Control (SETTINGS) Sound Sound Mode The best sound quality will be selected automatically depending on the video type currently being watched. • Standard: this sound mode works well for content of all types. • News: optimizes soun...

36 USER SETTINGS ENGLISH To Run a sound test Remote Control (SETTINGS) Sound Sound Test Run a sound test to check that sound signals are outputted normally, then solve any problems by selecting the relevant option on the screen. If there are no problems with the Sound Test, check connected external ...

39 USER SETTINGS ENGLISH General Settings To configure the language Remote Control (SETTINGS) General Menu Language Select one of the languages on the menu displayed on the screen. • Menu Language: sets a language for Signage. To set the time/date Remote Control (SETTINGS) General Time & Date Yo...

40 USER SETTINGS ENGLISH Installing the LG Monitor Software Insert the software CD included in the product packaging into your PC's CD drive and install the Screen Split. The installation screen images are for reference only. The actual installation screen images may vary depending on the model. 3 F...

42 TROUBLESHOOTING ENGLISH TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? y y Check if the power cord is correctly plugged into the power outlet . Does the Out of range message appear? y y The signal from the PC (video card) is out of the vertical or horiz...

44 PRODUCT SPECIFICATIONS ENGLISH PRODUCT SPECIFICATIONS LCD screen Screen type 248 cm Wide Thin Film Transistor (TFT)Liquid Crystal Display (LCD) ScreenDiagonal length of the screen: 248 cm98” class (97.5” / 247.6 cm diagonal) Pixel pitch 0.562 mm (H) x 0.562 mm (V) Video signal Maximum resolution ...

49 IR CODES ENGLISH IR CODES All models do not support the HDMI/USB function. Some key codes may not be supported Depending upon the model. Code (Hex) Function Remarks 08 Remote control button C4 ON Remote control button C5 OFF Remote control button 95 Energy Saving Remote control button 0B INPUT Re...

51 TO CONTROL MULTIPLE PRODUCTS ENGLISH TO CONTROL MULTIPLE PRODUCTS Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC.In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting...

52 TO CONTROL MULTIPLE PRODUCTS ENGLISH Command Reference List COMMAND DATA (Hexadecimal) 1 2 01 Power k a 00 to 01 02 Select input x b See Select Input 03 Aspect Ratio k c See Aspect Ratio 04 Energy Saving j q See Energy Saving 05 Picture Mode d x See Picture Mode 06 Contrast k g 00 to 64 07 Bright...

54 TO CONTROL MULTIPLE PRODUCTS ENGLISH Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: identifies between the factory setting and the user setting modes.* [Command2]: controls monitor sets.* [Set ID]: Used for selecting a set you want to contr...

www.lg.com Please read this manual carefully before operating your set and retain it for future reference. webOS 1.0 USER GUIDE LG Digital Signage (MONITOR SIGNAGE)

2 ENGLISH TABLE OF CONTENTS To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available ...

4 ENGLISH Picture Settings To Select Picture Mode Picture Picture Mode Select the picture mode that is best suited to the video type. • Vivid : adjusts the video image for a retail environment by enhancing the contrast , brightness, and sharpness . • Standard : adjusts the video image for a normal e...

14 ENGLISH ENTERTAINMENT Using My Media Connecting USB Storage Devices Connect a USB storage device such as a USB flash memory or an external hard drive to the display and use multimedia features. CAUTION • Do not turn off the monitor or remove a USB storage device when the My Media screen is activa...

21 ENGLISH SuperSign Contents Plays stored files using the Export option in SuperSign Editor. To play back the stored files using the Export option Only contents distributed by SuperSign Manager are displayed and selectable. NOTE • If there is an AutoPlay folder in the USB storage device and its fil...

22 ENGLISH PICTURE ID Settings PICTURE ID is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each monitor is identified by a Set ID . If you a...

25 ENGLISH TO CONTROL MULTIPLE PRODUCTS Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC.In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the Cable Connect the RS-232...

www.lg.com Please read this manual carefully before operating your set and retain it for future reference. webOS 1.0 INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE)

2 ENG ENGLISH CONTENTS ACCESSING INSTALLATION MENU ...... 3 INSTALLATION MENU ........................... 4 - Signage Setup ................................................................. 4 - USB Cloning .................................................................... 8 - Password Change ........

3 ENG ENGLISH ACCESSING INSTALLATION MENU NOTE y y Images in the manual may look different from the actual product. 1 Press and hold the SETTINGS button for 5 seconds. S.MENU AUTO MUTE MENU 2 When Toast (The top right corner ) is displayed, enter your password. (The default value is 0, 0, 0, 0 ) 3 W...

4 ENG ENGLISH INSTALLATION MENU NOTE y y Some features described in the Installation manual may not be supported in certain models. Signage Setup Use this menu to configure the digital signage after installation. Power On Status y y You can select the operating status of the monitor when the main po...

6 ENG ENGLISH Power On Delay (0 ~ 250) y y This feature delays power on in order to prevent overload when multiple monitor sets are turned on simultane-ously. y y You can set the delay interval in the range of 0 to 250 seconds. Digital Audio Input y y HDMI/DISPLAYPORT: you can hear the sounds of dig...

7 ENG ENGLISH BLU Maintenance Mode y y Enables or disables the luminance maintenance function. y y If turned On, the luminance maintenance function is enabled. (XF2B, XF3C: Luminance 2500 nit) y y If turned Off, the luminance maintenance function is disabled. (XF2B: Luminance 2500 nit, XF3C: Luminan...

8 ENG ENGLISH USB Cloning You can copy the product settings to other sets. Send to USB y y You can save the current settings in file format to a USB device. y y Select the file name and press the OK button to complete y y You cannot save the following items: Advanced Control under PICTURE, Clock, Sl...

9 ENG ENGLISH Tile Mode You can configure the integrated screen in the same way as each screen is configured. To use this function - Must be used with multiple monitors. - Must be operated after connecting the monitors using DP Cable and distributor. - Tile mode: row x column (r = 1 to 15, c = 1 to ...

10 ENG ENGLISH Tile Mode This monitor can be tiled with additional monitors to create a large tiled display. OffWhen the Tile Mode option is disabled 1X2When using 2 monitors ID 1 ID 2 Tile ID 2X2When using 4 monitors 3X3When using 9 monitors ID 1 ID 2 ID 3 ID 4 ID 1 ID 2 ID 4 ID 5 ID 3 ID 6 ID 7 ID...

11 ENG ENGLISH Fail Over The input source with the highest priority will be selected. Off y y The Auto-Fail Over feature is disabled. Auto y y The input source changes according to the specified order. When several input sources are found, the input source with the highest priority will be selected....

12 ENG ENGLISH ISM Method If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Mode y y Selects the desired ISM Method mode. y y Normal : Disables the ISM method. y y Inversion: Inverts screen ...

14 ENG ENGLISH Server Set Automatically y y The monitor set will be set automatically so that the SuperSign server can search it. Server IP y y This is a menu where you can set an IP address for the SuperSign server. Server Status y y Server Status displays the status of the connection between your ...