LG 86TN3F-B - Manuals

6 ENGLISH Precautions for Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. • When lifting or moving the product...

7 ENGLISH Precautions for Using/Cleaning the Product WARNING • Do not attempt to disassemble, repair or modify the product yourself. - Fire or electric shock can occur. - Contact LG Customer Service for repair. • When cleaning the product, unplug the power cord and scrub gently with a soft cloth to ...

8 ENGLISH ASSEMBLY AND PREPARATION CAUTION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of counterfeit components. NOTE • The accessories provided with your product may vary depending on the model o...

9 ENGLISH Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. OPS kit KT-OPSA Screws (Diameter 3.0 mm (0...

10 ENGLISH Parts and Buttons The image may be different according to the model. Buttons Door Buttons Turns the power on or off. Activates the Launcher Door Open the door part to use the front input terminal and put the active pen inside.

11 ENGLISH Using Active Pen Name of Each Part 1 2 3 4 1 Pen tip 2 Button 1 The behavior depends on the operating system and program settings. 3 Button 2 The behavior depends on the operating system and program settings. 4 Pen cap How to Use The active pen basically has the same functions as a mouse ...

13 ENGLISH Precaution When Using the Active Pen (Replacement of Tip) When the tip of the active pen is worn as shown in the figure, replace the tip using a tip-remover provided as an accessory. NOTE • Before the tip is worn out and becomes less than about 1 mm (0.03 inches), replace the tip with a n...

15 ENGLISH Installing on a Wall For proper ventilation, allow a clearance of 100 mm (3.9 inches) on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 100 mm (3.9 inches) 100 mm 100...

17 ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartm...

19 ENGLISH MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cabl...

22 ENGLISH TROUBLESHOOTING Ů Each model may have different points to check. Ů For information on your PC settings, refer to the Windows Help. Issues Related to Use • The power won’t turn on. - Check if the power cord is correctly plugged into the power outlet. • The ‘Unknown Product’ message appears...

26 ENGLISH PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions.“ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT)Liquid Crystal Display (LCD) Scre...

31 ENGLISH LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com . The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and ...

Please read this manual carefully before operation and retain it for future reference. webOS 4.0 www.lg.com USER MANUAL LG Digital Signage (MONITOR SIGNAGE)

ENGLISH 2 CONTENTS SETTINGS ......................................4 -Home .......................................................................................4 Global ButtonsDashboard[Content Manager] -Ez Setting .............................................................................5 [Vide...

ENGLISH 3 To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that have the obligation to disclose source code, and to access all referred license terms, copyright notices and other relevant documents, please visit https://opensource.lge....

ENGLISH 4 NOTE • Software-related content may be changed without prior notice due to upgrades of the product functions. • Some features described in the User Manual may not be supported in certain models and countries. • SNMP 2.0 is supported. SETTINGS Home Global Buttons • [Position]: Navigate to t...

ENGLISH 5 Ez Setting [Video Wall] [Ez Setting] [Video Wall] Set Video Wall options to create a wide visual canvas. • [Tile Mode]: Turn [Tile Mode] on or off. • [Tile Mode Settings]: Display a single integrated screen on multiple Signage monitors. • [Natural Mode]: Display the image excluding the are...

ENGLISH 14 General [Language] [General] [Language] You can select the menu language to be displayed on the screen. • [Menu Language]: Sets the language of your Signage monitor. • [Keyboard Language]: Sets the language of the keyboard displayed on the screen. [System Information] [General] [System In...

ENGLISH 28 [Pointer Options] You can set the speed and size of the pointer that appears on the screen to your liking. • Speed: You can set the movement speed of the pointer. • Pointer Size: You can set the size of the pointer. Display [Picture Mode] [Display] [Picture Mode] [Mode] This feature enabl...

ENGLISH 35 [Phase Shift] Phase Shift can make adjustment of LED screen output timming.LED screen can adjust timing manually to remove visual artefacts with Phase Shift, if camera recoding result make double image(double frame). • Range : 0~360. - 0: Don’t use Phase Shift - When [Frame Control] is us...

ENGLISH 36 How to Set the Screen Protection Mode • [Screen Protection Mode Setting]: Prevents after-images on the screen by analysing the characteristics of the external input images. • (SETTINGS) [Display] [Advanced Settings] [OLED Panel Settings] [Screen Protection Mode Setting] Step 1: Set [Scree...

ENGLISH 41 Sound [Sound Mode] [Sound] [Sound Mode] [Sound Mode] The best sound quality will be selected automatically depending on the video type currently being watched. • [Standard]: This sound mode works well for content of all types. • [Cinema]: Optimize sound for watching movies. • [Clear Voice...

ENGLISH 44 Admin [Lock Mode] [Admin] [Lock Mode] [Home Dashboard Lock] When you set the Home Dashboard Lock, you can limit the change in the settings of the Home Dashboard. [USB Lock] This feature enables you to configure the USB lock feature so that settings or content cannot be changed. [OSD Lock]...

ENGLISH 46 CONTENT MANAGER Web Login • Different features are supported depending on the product. This Signage product comes with a feature that enables you to access it on your PC or mobile device. - Content Manager, Group Manager 2.0, Control Manager, Log Out, Change Password menus are provided. •...

ENGLISH 56 ScreenShare This feature allows the screen of a user’s device such as a mobile or PC Windows to be shared with a display using a wireless connection such as WiDi or Miracast. How to Use [ScreenShare] [ScreenShare] 1 Connect according to the instructions provided by the guide that can be a...

ENGLISH 57 LG Presenter This feature is to display the PC (Windows or Mac OS) screen on the Signage monitor with wired/wireless connection to the PC. To use this feature, you need to install LG Presenter PC Client (“Client”) on the PC. You can use LG Presenter in the following ways. - Connect: Enter...

ENGLISH 58 Connect On Signage [LG Presenter] On PC 1 Go to www.lge.com/LGP to download the Client. 2 Install and run the downloaded Client. 3 Enter the username you want and press the button . 4 Select either auto search or manual search to connect your device. • Auto search - When the list of Signa...

ENGLISH 59 Screen Share 1 Select the screen you want to share and press the “Share” button. 2 To leave Screen Share, press the [STOP] button. CAUTION • if Screen Share does not work or won’t connect to the Signage device, check the firewall settings on your PC. Handover PC1: The PC where the client ...

ENGLISH 60 MANAGEMENT TOOLS Control Manager Control and check the status of the display through the Web browser.This function is available for PCs and mobile devices.Different features are supported depending on the product. Function • [Dashboard]: Display a summary of the product's status and provi...

ENGLISH 61 Picture ID [Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each monitor is identified by a Set ID. Setting [Picture...

ENGLISH 62 TOUCH Touch Assistive Menu This touch-exclusive feature allows the user to configure settings without a remote control.Touching the screen for a certain period of time or pressing the Touch Assistive Menu local key brings up the Touch Assistive Menu on the screen.Different features are su...

ENGLISH 63 TO CONTROL AN EXTERNAL PC USING TOUCH SCREEN • This only applies to certain models. Connecting to a PC Connecting this product to a PC with a USB cable (Type A to Type B) allows you to control the connected PC by touching the screen of the product.For a PC that supports USB-C, use a USB-C...

ENGLISH 64 SMART CALIBRATION How to Run [Smart Calibration] 1 Set the Set ID of each set. 2 Select the [Picture Mode] to execute Smart Calibration. When you set [Picture mode] to [Calibration] mode, you can set [Color Temperature] among [3000 K / Optimal Target / Original]. - [Optimal Target]: Set t...

ENGLISH 66 IR CODE • All models do not support the HDMI/USB function. • Some key codes may not be supported depending on the model. Code (Hex) Function Remarks 08 (Power) Remote control button C4 MONITOR ON Remote control button C5 MONITOR OFF Remote control button 95 Remote control button 0B INPUT ...

ENGLISH 68 CONTROLLING MULTIPLE PRODUCTS • This only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC.In the Option menu, the Set ID must be between 1 and 1000 without being duplicated....

ENGLISH 69 Communication Parameter Baud Rate: 9600 BPSData Length: 8 bitsParity Bit: NoneStop Bit: 1 bitFlow Control: NoneCommunication Code: ASCII NOTE • When using 3-wire connections (non-standard), an IR daisy chain cannot be used. • Be sure to only use the provided gender to connect properly. • ...

ENGLISH 70 Command Reference List Command Data (Hexadecimal) 1 2 01 [Power] k a 00 to 02 02 Select Input x b See Select Input 03 [Aspect Ratio] k c See [Aspect Ratio] 04 [Brightness Control] j q 00 to 04 05 [Picture Mode] d x See [Picture Mode] 06 [Contrast] k g 00 to 64 07 [Brightness] k h 00 to 64...

ENGLISH 74 Transmission/Reception Protocol Transmission (Command1)(Command2)( )(Set ID)( )(Data)(Cr) * (Command1): This command is used to identify between the adjustment setting or the user adjustment modes.* (Command2): This command is used to control the monitor.* (Set ID): Used for selecting a s...