LG 55VH7B-H - Manuals

5 ENGLISH WARNING Precautions in Using/Cleaning the Product • Do not attempt to disassemble, repair or modify the product yourself . ► Fire or electric shock can occur. ► Contact LG Customer Service for repair. • When cleaning the product, unplug the power cord and scrub gently with a soft cloth to ...

6 ENGLISH LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com . The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ...

7 ENGLISH ASSEMBLY AND PREPARATION Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. • Always use genu...

8 ENGLISH OPS kit Card (Easy Setup Guide) Power Cord Connecting Cable KT-OPSA Screws (Diameter 3.0 mm x Length 8.0 mm) Screws (Diameter 3.0 mm x Length 8.0 mm) • Optional accessories are available for some models. If necessary, please purchase them separately. • To prevent damage to the unit or the ...

9 ENGLISH Parts and Buttons The image may be different according to the model. Buttons To Install in a Portrait Layout When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen). Remove brackets before Installation Make sure that the protection pads are re...

10 ENGLISH Correct Method Incorrect Method STORAGE METHOD FOR PANEL PROTECTION Panel Panel If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel to touch the floor. When laying down the product, lay a cushion on a flat floor. Pu...

11 ENGLISH Installing on a Wall To install the Monitor on a wall (optional), use the VESA screws provided as accessories to fasten it. • Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock. • If you install the monitor on a ceiling or slanted wall, it ma...

13 ENGLISH EXTERNAL EQUIPMENT SETUP IR RECEIVER This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. How to Mount the Set Tiling Displays Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, m...

14 ENGLISH How to Join Sets 1 Join other sets using screws for fixing the VESA wall mount in the same way as above. 2 Adjust the spacing between the sets using the tiling guide, and remove the protective sheet. 3 Now the 2 x 2 tiling is complete. You can tile in various combinations, such as 3 x 3. ...

15 ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly.To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartme...

17 ENGLISH MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect.For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cable...

19 ENGLISH • If the signal cable between the product and your PC is too long, make sure to use the Booster or optical cable. • Daisy chaining the video output may be limited depending on the performance of the input device that supports HDCP. NOTE Daisy Chain Monitors To use different products conne...

20 ENGLISH TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? y Check if the power cord is correctly plugged into the power outlet . Does the “Invalid Format” message appear? y The signal from the PC (graphics card) is out of the vertical or horizontal frequen...

23 ENGLISH PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions.“ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT)Liquid Crystal Display (LCD) Scre...

www.lg.com Please read this manual carefully before operating your set and retain it for future reference. webOS 2.0 USER GUIDE LG Digital Signage (MONITOR SIGNAGE)

2 ENGLISH TABLE OF CONTENTS USER SETTINGS ............................3 -Main Menu Settings ........................................................3 Picture SettingsSound SettingsNetwork SettingsGeneral Settings ENTERTAINMENT ...................... 13 -Using My Media ..................................

3 ENGLISH User Settings Main Menu Settings Picture Settings To Select Picture Mode Advanced Picture Picture Mode Settings Picture Mode Select the picture mode that is best suited to the video type . • Vivid: adjusts the video image for a retail environment by enhancing the contrast , brightness , an...

8 ENGLISH Sound Settings • Only applies to certain models. To select a Sound Mode Advanced Sound Sound Mode The best sound quality will be selected automatically depending on the video type currently being watched. • Standard: this sound mode works well for content of all types. • Cinema: optimizes ...

9 ENGLISH Network Settings To Set a Signage Monitor Name Advanced Network Signage Name You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard. To Set Your Wired Network Advanced Network Wired Connection (Ethernet) • Connecting to a wired network : Con...

11 ENGLISH General Settings To configure the language Advanced General Menu Language Select one of the languages on the menu displayed on the screen. • Menu Language: sets a language for Signage. Setting up the keyboard language Advanced General Keyboard Languages Select the language you wish to sho...

13 ENGLISH • Do not turn off the monitor or remove a USB storage device when the My Media screen is activated. This could result in loss of files or damage to the USB storage device. • Back up files you have saved on a USB storage device frequently, as loss or damage to the files may be not covered ...

15 ENGLISH Files Supported by My Media Supported External Subtitle Format (Subtitles are not supported in certain models.) • *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema) To use Select Play Photos/ Videos/ Music/ All • Play S...

18 ENGLISH Viewing Videos Play video files on display. All of the saved video files are shown in your display. To play video files on display Videos Tips for Playing Video Files • Some user-created subtitles may not work properly. • Some special characters in subtitles are not rendered. • HTML tags ...

20 ENGLISH Viewing Photos The displays on the screen may differ from the model. Viewing image files Photos Listening to Music Viewing music files Music • Files with unsupported extensions are not displayed. • If a file is invalid, a broken image and the message "unrecognizable file" are disp...

21 ENGLISH SuperSign Contents Plays stored files using the Export option in SuperSign Editor. To play back the stored files using the Export option Only contents distributed by SuperSign Manager are displayed and selectable. If there is a USB/SD storage device connected, the image on the USB/SD devi...

22 ENGLISH Local Contents Scheduler • Only applies to certain models. You can view or delete any scheduled playing created in MY MEDIA . To access Local Contents Scheduler Go to Local Contents Scheduler to check the list of the scheduled playing created in MY MEDIA . To add new a scheduled playing •...

23 ENGLISH Screen Share Allows the screen of a user's device such as a mobile or PC Windows to be shared with a display using a wireless connection such as WiDi or Miracast. To use Screen Share When the Screen Share app is running, the wireless connection such as WiDi or Miracast is automatically se...

29 ENGLISH 2 Press the red ON button on the remote control to assign the PICTURE ID . 3 Assign the Set ID to the selection of your choice. • A set with a different Set ID from the PICTURE ID cannot be controlled by IR signals. 1 Assign the Set ID to the installed monitors as shown below . PICTURE ID...

30 ENGLISH IR CODES All models do not support the HDMI/USB function. Some key codes may not be supported depending on the model. Code (Hex) Function Remarks 08 POWER Remote control button C4 MONITOR ON Remote control button C5 MONITOR OFF Remote control button 95 Energy Saving Remote control button ...

32 ENGLISH TO CONTROL MULTIPLE PRODUCTS Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC.In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the Cable • The image may be...

33 ENGLISH Communication Parameter Baud Rate: 9600 BPSData Length: 8 bitParity Bit: NoneStop Bit: 1 bitFlow Control: NoneCommunication Code: ASCII code • When using three-wire connections (non-standard), an IR daisy chain cannot be used. • Be sure to only use the provided gender to connect properly....

34 ENGLISH Command Reference List COMMAND DATA (Hexadecimal) 1 2 01 Power k a 00 to 01 02 Select input x b See Select Input 03 Aspect Ratio k c See Aspect Ratio 04 Energy Saving j q See Energy Saving 05 Picture Mode d x See Picture Mode 06 Contrast k g 00 to 64 07 Brightness k h 00 to 64 08 Sharpnes...

37 ENGLISH Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: identifies between the factory setting and the user setting modes.* [Command2]: controls monitor sets.* [Set ID]: Used for selecting a set you want to control. A unique Set ID can be as...

www.lg.com Please read this manual carefully before operating your set and retain it for future reference. webOS 2.0 INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE)

TABLE OF CONTENTS ACCESSING INSTALLATION MENU ..................4 INSTALLATION MENU ..................5 -Signage Setup Menu .......................................................5 Power On StatusIR OperationLocal Key OperationWake On LANLAN Daisy ChainNo Signal Power Off (15 Min)Auto Power OffBeaco...

ACCESSING INSTALLATION MENU 1 Press and hold the SETTINGS button for 5 seconds. S.MENU AUTO MUTE MENU 2 When Input ID (The top right corner ) is displayed, enter your password. (The default value is 0, 0, 0, 0 • ) 3 When the Installation Menu is displayed, select the desired option. - Signage Setup ...

INSTALLATION MENU NOTE • Some features described in the Installation manual may not be supported in certain models. Signage Setup Menu Use this menu to configure the digital signage after installation. Power On Status • You can select the operating status of the monitor when the main power is switch...

OPS Power Control, OPS/PC Power Control • You can control the power of the OPS. • Disable: Disables the OPS Power Control. • Sync (on) : Synchronizes the power status of the monitor and the OPS only when monitor is on. • Sync (on/off ) : Always synchronizes the power status of the monitor and the OP...

Status Message • Sets up a feature that sends the status of Signage to users' email addresses. • The administrator can set Status Message to On or Off. • Messaging Period: Sets a time interval to send messages. You can select either When Failure Status or Weekly. • Select Date: Available if you have...

SIMPLINK Setup • When the SIMPLINK Setup is set to On, you can use the SIMPLINK provided by LG Signage. • Device ID: S ets the ID of the device connected via CEC wiring. You can choose a value between 'All' and 'E'. • StandBy: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command...

Guide to Using Content Rotation/Pivot Mode/Scan Inversion If you have enabled both Pivot Mode and Scan Inversion, the logo screen that appears when the monitor is turned on will be inverted vertically as well as horizontally. [Portrait installation setting] In the original image or in Pivot mode, yo...

USB Cloning Menu You can copy the product settings to other sets. Send To USB • You can save the current settings in file format to a USB device. • Select the file name and press the OK button to complete • You cannot save the following items: HDMI ULTRA HD Deep Color, Advanced settings under Pictur...

Tile Mode Menu You can configure the integrated screen in the same way as each screen is configured.To use this function - Must be used with multiple monitors. - Must be operated by connecting to each display via a distributor or DP daisy chain. - Tile mode: row x column (r = 1 to 15, c = 1 to 15) -...

Fail Over Menu The input source with the highest priority will be selected. Off • The Auto-Fail Over feature is disabled. Auto • The input source changes according to the specified order. When several input sources are found, the input source with the highest priority will be selected. • PriorityCas...

ISM Method Menu If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Mode • Selects the desired ISM Method mode. • Normal : Disables the ISM method. • White Wash : Displays a white pattern to r...

User Image Download • To download an image, the image file must be located under the folder titled "ISM" on your USB drive. • Make sure to delete the old images stored in the internal memory before downloading a new image file. • Supported image file types: "BMP", "JPG", "...

Server Menu Set Automatically • The monitor settings will be set automatically so that the SuperSign server can search it. Server IP • This is a menu where you can set an IP address for the SuperSign server. Server Status • Server Status displays the status of the connection between your monitor and...

Lock Mode Menu USB • You can prevent the use of USB devices. OSD • You can prevent OSD from displaying. Reset to Initial Settings • You can restore the initial settings with this feature. WiFi • You can restrict the Wi-Fi settings. ENGLISH 24