LG 49VL5B-B - Manuals

5 ENGLISH Precautions in Using/Cleaning the Product WARNING • Do not attempt to disassemble, repair or modify the product yourself. ► Fire or electric shock can occur. ► Contact LG Customer Service for repair. • When cleaning the product, unplug the power cord and scrub gently with a soft cloth to p...

6 ENGLISH LICENSES • Product damage from moving or changing the installation location is not covered by warranty. • The warranty will not cover any damage caused by using the product in an excessively dusty environment. NOTE Supported licenses may differ by model. For more information of the license...

7 ENGLISH ASSEMBLY AND PREPARATION • Always use genuine components to ensure safety and product performance. • The product warranty will not cover damage or injury caused by the use of counterfeit components. CAUTION • The accessories provided with your product may vary depending on the model or reg...

8 ENGLISH Parts To Install in a Portrait Layout When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen). LAN IN Connection panel

9 ENGLISH Correct Method Incorrect Method STORAGE METHOD FOR PANEL PROTECTION If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel to touch the floor. When laying down the product, lay a cushion on a flat floor. Put the product...

10 ENGLISH Installing on a Wall To install the Monitor on a wall (optional), use the VESA screws provided as accessories to fasten it.Install the monitor at least 200 mm (7.8 inches) away from the wall and leave about 100 mm (3.9 inches) of space at each side of the monitor to ensure sufficient vent...

11 ENGLISH Securing the monitor to a wall (optional) (Procedure may differ depending on the model.) 1 Insert and tighten the eyebolts, or brackets and bolts on the back of the monitor. - If there are already bolts inserted in the eyebolts’ position, remove the other bolts first. 2 Mount the wall bra...

12 ENGLISH IR Receiver Connection IR RECEIVER This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. How to Mount the Set Tiling Displays Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mou...

13 ENGLISH How to Join Sets 1 Join other sets using screws for fixing the VESA wall mount in the same way as above. 2 After joining the sets, use the tiling guide to adjust the gap between the sets. 3 Now the 2 x 2 tiling is complete. You can tile in various combinations, such as 3 x 3. Set 4 joined...

14 ENGLISH (POWER) Turns the monitor on or off. Turns the monitor on. Turns the monitor off. Reduces power consumption by adjusting peak screen brightness. Selects the input mode. Used for viewing 3D videos. (This model does not support this.) Toggles between numerical and alphabetical. Number and A...

15 ENGLISH Selects the Picture Mode. Views the information of the currently program and the screen. Enters the White Balance menu. Accesses the main menus or saves your input and exit menus. SuperSign menu key (This model does not support this.) Navigation Buttons Scrolls through menus or options. S...

16 ENGLISH MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect.For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cable...

18 ENGLISH Daisy Chain Monitors DVI-D Cable • For DVI-D, in general, up to 12 monitors can be connected via the DVI-D Out port (at the recommended resolution) if the signal is stable and there is no cable loss. If you want to connect more than this number of monitors, we recommended that you use a d...

19 ENGLISH TROUBLESHOOTING No image is displayed Problem Resolution Is the product power cord connected? y See if the power cord is properly connected to the outlet. Power is on, but the screen appears extremely dark. y Adjust brightness and contrast again. y Backlight may need repair. Does the Inva...

20 ENGLISH After-image appears on the product. Problem Resolution After-image appears when the product is turned off. y If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screen-saver function. Screen color is abnormal. Problem Resolution Screen has poor color resol...

21 ENGLISH What is image sticking? When the LCD panel displays a static image for an extended period of time, it can cause a voltage difference between the electrodes that operate the liquid crystals. When the voltage difference between the electrodes builds up over time, liquid crystals have a tend...

22 ENGLISH PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions.“ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT)Liquid Crystal Display (LCD) Scre...

23 ENGLISH RGB (PC) Support mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 640 x 480 31.469 59.94 720 x 400 31.468 70.8 800 x 600 37.879 60.317 1024 x 768 48.363 60 1280 x 720 44.772 59.855 1280 X 960 60 60 1152 X 864 57.717 59.934 1280 x 1024 63.981 60.02 1920 x 1080 67.5 60 HDM...

www.lg.com Please read this manual carefully before operating your set and retain it for future reference. LG Digital Signage (MONITOR SIGNAGE) USER GUIDE L14

2 ENG ENGLISH TABLE OF CONTENTS 3 USING THE MONITOR 3 Using the Input List 3 Adjusting Aspect Ratio 5 ENTERTAINMENT 5 - Connecting to a Wired Network 6 - Network Status 7 Using the My Media 7 - Connecting USB Storage Devices 9 - Browsing Files 10 - Viewing Movies 13 - Viewing Photos 15 - Viewing the...

3 ENG ENGLISH Using the Input List 1 Press INPUT to access the input source list. 2 Press the navigation buttons to scroll to one of the input sources and press OK . Adjusting Aspect Ratio Resize the image to view the image at its optimal size by pressing ARC while you are watching Monitor set. y y ...

4 ENG ENGLISH y y 16:9 This selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs). y y Just Scan This Selection will allow you view the picture of best quality without loss of original picture in high reso...

5 ENG ENGLISH ENTERTAINMENT Connecting to a Wired Network Connect the display to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings.Only supports wired network connection.After making a physical connection, a small number of networks ma...

6 ENG ENGLISH Tips for Network Setting y y Use a standard LAN cable with this display. Cat5 or better with a RJ45 connector. y y Many network connection problems during set up can often be fixed by re-setting the router or mo-dem. After connecting the display to the network, quickly power off and/or...

7 ENG ENGLISH Tips for Using USB Storage Devices y y Only a USB storage device is recognizable. y y If the USB storage device is connected through a USB hub, the device is not recognizable. y y A USB storage device using an automatic recog-nition programme may not be recognized. y y A USB storage de...

9 ENG ENGLISH Browsing Files Browse files saved in a USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the search button to scroll to MY MEDIA and press OK . 3 Press the Search button to go to the Movie List , Photo List or Content List that you want, and press OK . Type Supporte...

10 ENG ENGLISH Viewing Movies Plays movie files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK . 3 Press the navigation button to scroll to Movie List and press OK . 4 Press the navigation buttons to scroll ...

12 ENG ENGLISH y y Only 10,000 of sync blocks can be supported within the subtitle file. y y When playing a video, you can adjust the picture size by pressing the ARC button. y y Subtitles in your language are only supported when the OSD menu is also in this language. y y The code page options may b...

13 ENG ENGLISH Viewing Photos View image files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK . 3 Press the navigation button to scroll to Photo List and press OK . 4 Press the navigation buttons to scroll t...

15 ENG ENGLISH Viewing the Contents List Plays back the stored files using the Export option in SuperSign Manager . 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK . 3 Press the navigation button to scroll to Contents List and press OK . 4 P...

16 ENG ENGLISH DivX® VOD Guide DivX® VOD Registration In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registra-tion code from your device at www.divx.com/vod. 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scro...

17 ENG ENGLISH CUSTOMIZING SETTINGS Accessing Main Menus 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to one of the following menus and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . 4 When you are finished,...

18 ENG ENGLISH PICTURE Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - To return to the previous level, press BACK . 4 When you are finis...

19 ENG ENGLISH Basic image options Setting Description Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. Contrast Increases or decre...

21 ENG ENGLISH TIME Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to TIME and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - To return to the previous level, press BACK . 4 When you are finished, p...

22 ENG ENGLISH OPTION Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to OPTION and press OK . 3 Press the navigation buttons to scroll to the setting or option you want and press OK . - To return to the previous level, press BACK . 4 When you are finishe...

23 ENG ENGLISH Tile Mode This monitor can be tiled with additional monitors to create a large tiled display. Tile Mode - Natural mode When active, the part of the image that would normally be displayed in the gap between the monitors is omitted. ID 1 ID 2 ID 3 ID 4 ID 1 ID 2 ID 4 ID 5 ID 3 ID 6 ID 7...

24 ENG ENGLISH Setting Description Network Setting Configure the network settings. Network Status Display the network status. NETWORK Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to NETWORK and press OK . 3 Press the navigation buttons to scroll to the...

25 ENG ENGLISH Code (Hexa) Function Note 08 ( Power) R/C BUTTON 0B INPUT R/C BUTTON C4 MONITOR ON R/C BUTTON C5 MONITOR OFF R/C BUTTON 95 ENERGY SAVING R/C BUTTON DC 3D R/C BUTTON 10 to 19 Number Key 0 to 9 R/C BUTTON 32 1/a/A R/C BUTTON 2F CLEAR R/C BUTTON 02 Volume R/C BUTTON 03 Volume R/C BUTTON ...

26 ENG ENGLISH PICTURE ID Picture ID is used to change the settings of a specific display using a single IR receiver for multi-vision. The set receiving the IR signal communicates with another set via an RS-232C connection. Each set is identified by a Set ID. If you assign the Picture ID using the r...

27 ENG ENGLISH CONTROLLING THE MULTIPLE PRODUCT y y Use this method to connect several products to a single PC. You can control several products at one time by connecting them to a single PC. y y In the Option menu, Set ID must be between 1 and 255 (or from 1 to 1000) without being duplicated. Conne...

28 ENG ENGLISH Command Reference List COMMAND DATA (Hexadecimal) 1 2 01 Power k a 00 to 01 02 Select input x b See [Select input] 03 Aspect ratio k c See [Aspect ratio] 04 Energy saving j q See [Energy saving] 05 Picture mode d x See [Picture mode] 06 Contrast k g 00 to 64 07 Brightness k h 00 to 64...

29 ENG ENGLISH y y During USB operations such as Dvix or EMF, all commands except Power (k a) and Key (m c) are not executed and treated as NG. y y Some commands are not supported depending on the model. y y The f f command which shows the status of a certain command does not display the OSD as the ...

30 ENG ENGLISH Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [ Command1 ]: First command to control the set. * [ Command2 ]: Second command to control the set. * [ Set ID ]: Used for selecting a set you want to control. A Set ID can be assigned to each...

32 ENG ENGLISH 07. Brightness (Command: k h) Adjusts the screen brightness. Transmission[k][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 Acknowledgement[h][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) Adjusts the screen sharpness. Transmission[k][k][ ][Set ID][ ][Data]...

33 ENG ENGLISH 13. V position (Command: f r) Adjusts the vertical position of the screen.This function is only available when the Tile Mode is set to Off.* The operational range varies depending on the RGB input resolution.(Only available in RGB-PC input mode) Transmission[f ][r][ ][Set ID][ ][Data]...

34 ENG ENGLISH 19. Volume (Command: k f ) Adjusts the playback volume. Transmission [k][f ][ ][Set ID][ ][Data][Cr] Data 00 to 64: Volume 0 to 100 Acknowledgement [f ][ ][Set ID][ ][OK/NG][Data][x] ** This may not be supported on some models. 20. Clock 1 (year/month/day) (Command: f a) Adjusts the C...

36 ENG ENGLISH 26. On timer input (Command: f u) Adds a new schedule entry by selecting input for the current on timer setting. Transmission [f ][u][ ][Set ID][ ][Data1][Cr] [f ][u][ ][Set ID][ ][Data1][Data2][Cr] Data (adding schedule) 60: RGB90: HDMI (HDMI1) Data1 1. f1h to f7h (reading data)F1: S...

38 ENG ENGLISH 42. Power On Delay (Command: f h) To set the schedule delay when the power is turned on. (Unit: Second) Transmission[f ][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: min. 0 to max. 100 (sec.) Acknowledgement[h][ ][Set ID][ ][OK/NG][Data][x] 37. White balance red gain (Command: j m) Adjus...

1 ENG ENGLISH ACCESSING INSTALLATION MENU Accessing Installation Menu 1 Press and hold the SETTINGS button for more than 5 seconds. PICTURE OPTION NETWORK TIME MY MEDIA INPUT or PICTURE OPTION AUDIO NETWORK TIME MY MEDIA 2 Press the 0 button four times. Press the OK button. or HDMI DTV No Signal HDM...

2 ENG ENGLISH ACCESSING INSTALLATION MENU Installation Menu NOTE y y Default values may differ by region. The LG Digital Signage Setup menu This menu is used after installation to configure the Digital Signage. LG Digital Signage Setup USB CloningPassword ChangeSet ID SetupConfiguration SetupLock Mo...

3 ENG ENGLISH ACCESSING INSTALLATION MENU Key Operation y y This feature manages the usability of the local/front keys and your remote control with regard to their operations. This feature works according to the IR Operation and Local Key Operation settings. (It may not work depending upon the model...

7 ENG ENGLISH ACCESSING INSTALLATION MENU LG Digital Signage Setup Initial setting/ Factory Reset Signage Mode Operation Signage Mode Operation Yes/ No NO Yes NO Power On Status STD/ PWR/ LST STD (Actual operations are performed in LST status) User STD (Actual operations are performed in LST status)...

8 ENG ENGLISH ACCESSING INSTALLATION MENU USB Cloning The administrator can configure a monitor more quickly through USB and configure multiple monitors simultaneously. All monitors that have been configured this way operate according to the settings of the same master monitor.This newer procedure s...

9 ENG ENGLISH ACCESSING INSTALLATION MENU Receive from USB Receive from USB GlobalClone00001.TLL GlobalClone99999.TLL Select file type Global TLL Model TLL OK Previous USB Cloning Ez Download Receive from USB Send to USBLogo Image DownloadNo Signal Image Download Send to Daisy Chain OK Previous 1 Us...

10 ENG ENGLISH ACCESSING INSTALLATION MENU Logo Image Download You can download a Splash Image file on your monitor. Make a LG_DTV folder on the USB flash drive and then copy the splash image file to that folder. 1 Use the button to select the desired file name and press the OK button. Logo Image Do...

11 ENG ENGLISH ACCESSING INSTALLATION MENU Send to daisy chain This function is provided to copy the product settings to other sets using RS232C. 1 You can send the settings for the current set to other sets using the RS232C output. 2 The settings of the first set, which is RS232C daisy chained, are...

12 ENG ENGLISH ACCESSING INSTALLATION MENU Password Change You can change the password for security. Enter a new 4-digit number in Change Password . Enter the same number again in Confirm Password to confirm the password. Password Change Change PasswordConfirm Password ** ** ** ** OK Previous S/W : ...

18 ENG ENGLISH ACCESSING INSTALLATION MENU SuperSign Server Setup This feature is for a linkage with SuperSign Manager. Fail Over ModeUSBPriority1Priority2Priority3 ---------- Off OK Previous ----- Off S/W : xx.xx.xx.xx Micom : x.xx.x OK Installation Menu (V 3.0) LG Digital Signage SetupUSB CloningP...

19 ENG ENGLISH ACCESSING INSTALLATION MENU Easy Brightness Control This feature is for a linkage with SuperSign Manager. S/W : xx.xx.xx.xx Micom : x.xx.x OK Installation Menu (V 3.0) LG Digital Signage SetupUSB CloningPassword ChangeSet ID SetupConfiguration SetupLock ModeFail OverSuperSign Server S...