LG 42LS75A-5B - Manuals

5 ASSEMBLY AND PREPARATION ENGLISH Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. • Cable holder/Ca...

6 ASSEMBLY AND PREPARATION ENGLISH Screws Card (Easy Setup Guide) KT-OPSA OPS kit • Optional accessories are available for some models. If necessary, please purchase them separately. • Pixel sensor is sold separately. You can obtain additional accessories from your local retail store. NOTE Connectin...

7 ASSEMBLY AND PREPARATION ENGLISH Parts and Buttons Connection Panel Buttons Buttons Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus.Adjust the up and down.Moves left and right. AUTO/SET Displays the current signal and mode. / I Turn...

8 ASSEMBLY AND PREPARATION ENGLISH 2 Use the screws to secure the stand to the back of the product as shown below. Connecting the Stand - For certain models only. - The image may be different according to the model 1 Place a soft cloth on the table and place the product with the screen facing downwa...

9 ASSEMBLY AND PREPARATION ENGLISH Connecting IR & Light Sensor When you connect the cable to the product, the feature for receiving remote control signals is activated. The IR & light sensor is magnetic. Attach it to the front edge of the product for use. [Front] CAUTION CAUTION Portrait La...

10 ASSEMBLY AND PREPARATION ENGLISH OPS Hole Cover Connector on the KT-OPSA Connector inside the set Connecting the OPS - For certain models only. - The image may be different according to the model. 1 Lay a clean cloth on the floor, put the monitor on it with the screen facing downward, and then re...

12 ASSEMBLY AND PREPARATION ENGLISH Attaching and Removing the LG Logo Bracket - For certain models only. - The image may be different according to the model. Removing the LG Logo 1 Lay a clean cloth on the floor, and then put the monitor on it with the screen face down. Remove the two screws that s...

13 ASSEMBLY AND PREPARATION ENGLISH Installing on a Wall For proper ventilation, allow a clearance of 10 cm (3.9 inches) on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. To ins...

14 ASSEMBLY AND PREPARATION ENGLISH Securing the monitor to a wall (optional) Procedure may differ depending on the model. 1 Insert and tighten the eyebolts, or brackets and bolts on the back of the monitor. - If there are already bolts inserted in the eyebolts’ position, remove the other bolts firs...

15 REMOTE CONTROL ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly.To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels insid...

17 MAKING CONNECTIONS ENGLISH MAKING CONNECTIONS Connecting to a PC The illustrations may differ from the actual accessories. Some of the cables are not provided. This monitor supports the Plug & Play* feature. * Plug & Play: a feature that enables a PC to recognize devices attached by the u...

18 MAKING CONNECTIONS ENGLISH HDMI Network ฒખ External Device Connection Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.The illustrations may differ from the actual accessories. Some of the cables are not provided. For the best picture and sound quality...

20 MAKING CONNECTIONS ENGLISH • If the signal is stable and there is no cable loss, in general, up to 100 monitors can be connected via the DP Out port (at the recommended resolution). If you want to connect more than this number of monitors, use a booster. • If you set the tile mode using DVI-D or ...

21 MAKING CONNECTIONS ENGLISH Using the Multi Display Mode Function The Multi Display Mode function displays a video signal received from DP In either in single mode (SST: Single Stream Transport) or multi-mode (MST: Multi Stream Transport) through DP Out. • This function can be configured in the In...

22 ENTERTAINMENT ENGLISH Using the Input List Remote Control (HOME) Input Mode Description HDMI1 You can watch content on a PC, DVD player, digital set-top box, and other high definition devices. HDMI2/OPSDISPLAYPORTDVI-D • Do not turn off the monitor or remove a USB storage device when the My Media...

23 ENTERTAINMENT ENGLISH Tips for using USB storage devices • Only a USB storage device can be recognized. • A USB device does not work effectively when it is connected via a USB hub. • A USB storage device using an automatic recognition program may not be recognized. • A USB storage device using it...

24 ENTERTAINMENT ENGLISH Files Supported by My Media Supported External Subtitle Format • *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema) To use Select Play, Remote Control (HOME) Photos/ Videos/ Music • Play Selection: plays b...

25 ENTERTAINMENT ENGLISH Supported Internal Subtitle Format • FULL HD Video 1920 X 1080: XSUB (Supports internal subtitles generated from DivX6) Supported Video Codec Extension Codec .asf .wmv Videos VC-1 Advanced Profile (excluding WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (excluding ...

26 ENTERTAINMENT ENGLISH Supported Audio File File Format Item Information .MP3 Bit rate 32 Kbps - 320 Kbps Sample freq. 16 KHz - 48 KHz Support MPEG1, MPEG2, Layer2, Layer3 .wav Support PCM .ogg Support Vorbis .wma Support WMA Supported Photo File File Format Format Item 2D (jpeg, jpg, jpe) JPEG » ...

27 ENTERTAINMENT ENGLISH Viewing Videos Play video files on display. All of the saved video files are shown in your display. To play video files on display Remote Control (HOME) Videos Tips for Playing Video Files • Some user-created subtitles may not work properly. • Some special characters in subt...

29 ENTERTAINMENT ENGLISH Viewing Photos The displays on the screen may differ from the model. Viewing image files Remote Control (HOME) Photos Listening to Music Viewing music files Remote Control (HOME) Music • Files with unsupported extensions are not displayed. • If a file is invalid, a broken im...

30 ENTERTAINMENT ENGLISH Settings You must register your product to play a DRM-protected DivX video. In order to register/deregister purchased or rented DivX ® VOD contents Remote Control (HOME) Settings DivX ® VOD In order to play purchased or rented DivX ® VOD contents, you should register your de...

31 ENTERTAINMENT ENGLISH SuperSign Contents Plays stored files using the Export option in SuperSign Editor. To play back the stored files using the Export option Remote Control (HOME) Only contents distributed by SuperSign Manager are displayed and selectable. • If there is an AutoPlay folder in the...

32 ENTERTAINMENT ENGLISH 2 Press the red ON button on the remote control to assign the PICTURE ID . 1 Assign the Set ID to the installed monitors as shown below . 3 Assign the Set ID to the selection of your choice. • A set with a different Set ID from the PICTURE ID cannot be controlled by IR signa...

33 USER SETTINGS ENGLISH User Settings Main Menu Settings Quick Settings Configures frequently used settings menus. To turn your monitor on or off automatically Remote Control (SETTINGS) Quick On Timer/Off Timer You can set the On/Off Timer for your monitor. If you do not want to set the On/Off Time...

34 USER SETTINGS ENGLISH Picture Settings To Select Picture Mode Remote Control (SETTINGS) Picture Picture Mode Select the picture mode that is best suited to the video type . • Vivid: adjusts the video image for a retail environment by enhancing the contrast , brightness , and sharpness . • Standar...

35 USER SETTINGS ENGLISH To fine-tune the picture mode Remote Control (SETTINGS) Picture Picture Adjust • Backlight: adjusts the brightness of the screen by controlling the LCD backlight. The closer the value is to 100, the brighter the screen is. • Contrast: adjusts the difference between the light...

36 USER SETTINGS ENGLISH • Picture Options: customizes the picture options. Noise Reduction Removes irregularly generated tiny dots for a clear picture. MPEG Noise Reduction Reduces the noise produced while creating digital video signals. Black Level Adjusts the black level of the picture to correct...

38 USER SETTINGS ENGLISH Sound Settings To select a Sound Mode Remote Control (SETTINGS) Sound Sound Mode The best sound quality will be selected automatically depending on the video type currently being watched. • Standard: this sound mode works well for content of all types. • News: optimizes soun...

39 USER SETTINGS ENGLISH To Run a sound test Remote Control (SETTINGS) Sound Sound Test Run a sound test to check that sound signals are outputted normally, then solve any problems by selecting the relevant option on the screen. If there are no problems with the Sound Test, check connected external ...

40 USER SETTINGS ENGLISH • If you want to access the Internet directly on your display, the Internet connection should always be on. • If you cannot access the Internet, check the network conditions from a PC on your network. • When you use Network Setting , check the LAN cable or check if DHCP in t...

41 USER SETTINGS ENGLISH Tips for Wireless Network Setting • Wireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz (wireless phones, Bluetooth devices or microwave ovens). There may also be interference from devices with a frequency of 5 GHz, same as...

43 TROUBLESHOOTING ENGLISH TROUBLESHOOTING No image is displayed Problem Action Is the product power cord connected? » y Check if the power cord is correctly plugged into the power outlet . Does the Out of range message appear? » y The signal from the PC (video card) is out of the vertical or horizo...

44 TROUBLESHOOTING ENGLISH After-image appears on the product. Problem Action After-image appears when the product is turned off. » y If you use a fixed image for a long time, the pixels may be damaged. Use the screen-saver function. » y When a dark image is displayed on the screen after an image wi...

45 TROUBLESHOOTING ENGLISH What is image sticking? When the LCD panel displays a static image for an extended period of time, it can cause a voltage difference between the electrodes that operate the liquid crystals. When the voltage difference between the electrodes builds up over time, liquid crys...

46 PRODUCT SPECIFICATIONS ENGLISH LCD screen Screen type 106.4 cm Wide Thin Film Transistor (TFT)Liquid Crystal Display (LCD) ScreenDiagonal length of the screen: 106.4 cm42” class (41.9” / 106.4 cm diagonal) Pixel pitch 0.4833 mm (H) x 0.4833 mm (V) Video signal Maximum resolution 1920 x 1080 @ 60 ...

47 PRODUCT SPECIFICATIONS ENGLISH Dimensions (Width x Height x Depth) / Weight 948.7 mm x 555.3 mm x 31.7 mm / 12.5 kg(37.3 inches x 21.8 inches x 1.2 inches / 27.5 lbs) 948.7 mm x 617.7 mm x 298.3 mm / 13.9 kg (37.3 inches x 24.3 inches x 11.7 inches / 30.6 lbs) 948.7 mm x 555.3 mm x 81.3 mm / 13.3...

52 PRODUCT SPECIFICATIONS ENGLISH Product Dimensions The illustrations in this manual may differ from the actual product and accessories.Please see “Mounting on a wall” section for screw sizes. The product specifications below may be changed without prior notice due to upgrade of product functions. ...

55 PRODUCT SPECIFICATIONS ENGLISH HDMI(OPS) / DVI-D / DISPLAYPORT (PC) Support Mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 60 1280 x 720 44.772 59.855 1366 x 768 47.7 60 1280 x 1024 63.981 60.02 1680 x 1050 65.29...

56 IR CODES ENGLISH IR CODES All models do not support the HDMI/USB function. Some key codes may not be supported depending on the model. Code (Hex) Function Remarks 08 Remote control button C4 ON Remote control button C5 OFF Remote control button 95 Energy Saving Remote control button 0B INPUT Remo...

58 TO CONTROL MULTIPLE PRODUCTS ENGLISH TO CONTROL MULTIPLE PRODUCTS Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC.In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting...

59 TO CONTROL MULTIPLE PRODUCTS ENGLISH Command Reference List COMMAND DATA(Hexadecimal) 1 2 01 Power k a 00 to 01 02 Select input x b See Select Input 03 Aspect Ratio k c See Aspect Ratio 04 Energy Saving j q See Energy Saving 05 Picture Mode d x See Picture Mode 06 Contrast k g 00 to 64 07 Brightn...

61 TO CONTROL MULTIPLE PRODUCTS ENGLISH Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: identifies between the factory setting and the user setting modes.* [Command2]: controls monitor sets.* [Set ID]: Used for selecting a set you want to contr...

Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual (CD) in an accessible place for future reference. The model and serial numbers of the SET are located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL Temporary n...

www.lg.com Please read this manual carefully before operating your set and retain it for future reference. webOS 1.0 USER GUIDE LG Digital Signage (MONITOR SIGNAGE)

2 ENGLISH TABLE OF CONTENTS To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available ...

10 ENGLISH Tips for Network Setting • Use a standard LAN cable (Cat5 or higher with a RJ45 connector) with this display. • Many network connection problems during set-up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or d...

13 ENGLISH NOTE • On Time/Off Time can be saved for up to seven schedules; the monitor is turned on or off at the preset time in the schedule list. If multiple preset times are stored in the schedule list, this function works at the nearest time from the current time. • Once the on or off time is se...

14 ENGLISH ENTERTAINMENT Using My Media Connecting USB Storage Devices Connect a USB storage device such as a USB flash memory or an external hard drive to the display and use multimedia features. CAUTION • Do not turn off the monitor or remove a USB storage device when the My Media screen is activa...

21 ENGLISH SuperSign Contents Plays stored files using the Export option in SuperSign Editor. To play back the stored files using the Export option Only contents distributed by SuperSign Manager are displayed and selectable. NOTE • If there is an AutoPlay folder in the USB storage device and its fil...

25 ENGLISH TO CONTROL MULTIPLE PRODUCTS Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC.In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the Cable Connect the RS-232...

www.lg.com Please read this manual carefully before operating your set and retain it for future reference. webOS 1.0 INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE)

2 ENG ENGLISH CONTENTS ACCESSING INSTALLATION MENU ...... 3 INSTALLATION MENU ........................... 4 - Signage Setup ................................................................. 4 - USB Cloning .................................................................... 8 - Password Change ........

3 ENG ENGLISH ACCESSING INSTALLATION MENU NOTE y y Images in the manual may look different from the actual product. 1 Press and hold the SETTINGS button for 5 seconds. S.MENU AUTO MUTE MENU 2 When Toast (The top right corner ) is displayed, enter your password. (The default value is 0, 0, 0, 0 ) 3 W...

4 ENG ENGLISH INSTALLATION MENU NOTE y y Some features described in the Installation manual may not be supported in certain models. Signage Setup Use this menu to configure the digital signage after installation. Power On Status y y You can select the operating status of the monitor when the main po...

6 ENG ENGLISH Power On Delay (0 ~ 250) y y This feature delays power on in order to prevent overload when multiple monitor sets are turned on simultane-ously. y y You can set the delay interval in the range of 0 to 250 seconds. Digital Audio Input y y HDMI/DISPLAYPORT: you can hear the sounds of dig...

7 ENG ENGLISH BLU Maintenance Mode y y Enables or disables the luminance maintenance function. y y If turned On, the luminance maintenance function is enabled. (XF2B, XF3C: Luminance 2500 nit) y y If turned Off, the luminance maintenance function is disabled. (XF2B: Luminance 2500 nit, XF3C: Luminan...

8 ENG ENGLISH USB Cloning You can copy the product settings to other sets. Send to USB y y You can save the current settings in file format to a USB device. y y Select the file name and press the OK button to complete y y You cannot save the following items: Advanced Control under PICTURE, Clock, Sl...

9 ENG ENGLISH Tile Mode You can configure the integrated screen in the same way as each screen is configured. To use this function - Must be used with multiple monitors. - Must be operated after connecting the monitors using DP Cable and distributor. - Tile mode: row x column (r = 1 to 15, c = 1 to ...

10 ENG ENGLISH Tile Mode This monitor can be tiled with additional monitors to create a large tiled display. OffWhen the Tile Mode option is disabled 1X2When using 2 monitors ID 1 ID 2 Tile ID 2X2When using 4 monitors 3X3When using 9 monitors ID 1 ID 2 ID 3 ID 4 ID 1 ID 2 ID 4 ID 5 ID 3 ID 6 ID 7 ID...

11 ENG ENGLISH Fail Over The input source with the highest priority will be selected. Off y y The Auto-Fail Over feature is disabled. Auto y y The input source changes according to the specified order. When several input sources are found, the input source with the highest priority will be selected....

12 ENG ENGLISH ISM Method If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Mode y y Selects the desired ISM Method mode. y y Normal : Disables the ISM method. y y Inversion: Inverts screen ...

14 ENG ENGLISH Server Set Automatically y y The monitor set will be set automatically so that the SuperSign server can search it. Server IP y y This is a menu where you can set an IP address for the SuperSign server. Server Status y y Server Status displays the status of the connection between your ...