LG 42LD345H - Manuals - manualsarea.com

Page 2 - WARNING

2 206-4186 MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here: Model No._________________ Serial No._______________ WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE CO...

Page 3 - IMPORTANT SAFETY INSTRUCTIONS; Outdoor Use/Wet Location

3 206-4186 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accor- dance with the manufacturer...

Page 4 - Outdoor Antenna Grounding

4 206-4186 IMPORTANT SAFETY INSTRUCTIONS (Continued from previous page) 22. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other elec...

Page 5 - Table of Contents; Notes

5 206-4186 Table of Contents Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Important Safety Instructions . . . . . . . . . . . . . . . . . . . .3 – 4Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Commercial Mode Overview. . . . . ....

Page 6 - Commercial Mode Overview; Setup Checklist; Typical Installer Menu

6 206-4186 Installation and Setup Checklist __ Unpack TV and all accessories. __ Install batteries in remote control. __ Install TV on VESA mount or stand. Note: It may be advisable to make all cable connections before installing on VESA mount or stand, as appropriate. Hardware Connections __ Instal...

Page 7 - Cloning; FTG Mode; This mode enables Pro:Idiom; Remote Management in FTG Mode; Admin Client User Guide; External MPI Control; circuitry for both the embedded

7 206-4186 Commercial Mode Overview (Cont.) Cloning Cloning refers to the process of capturing a Master TV Setup and transferring it to a Target TV (both TVs must be in Pass-through Mode). The Master TV’s clonable setup menu options should be configured as part of the Master TV Setup. If there are f...

Page 8 - Pro:Centric TV Interactive Menu Features; Press; VOL; Pro:Centric Operation

8 206-4186 Pro:Centric TV Interactive Menu Features Important: Pro:Centric operation requires that Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL be set appropriately and that the TV be in PPV or FTG Mode. The interactive Pro:Centric TV enables guests—from the comfort of their hotel rooms...

Page 10 - Installer Remote Control Typical Key Functions

10 206-4186 Installer Remote Control Typical Key Functions MENU MUTE VOL CH P A G E RETURN INPUT TV ALARM TIMER 1 2 34 5 6 7 8 0 9 FLASHBK PORTAL ENTER GUIDE EXIT INFO EJECT SAP RATIO CC i NUMBER Buttons (0 - 9) & DASH Use to enter a program number or channel. Dash is used for sub-channel number...

Page 11 - Master TV Setup; Before You Begin; Auto Tuning is disabled if there is an Aux input active.; Cloning Methods; menu settings. See “Clonable TV Setup Menu Features” list below.; Clonable TV Setup Menu Features

11 206-4186 Master TV Setup This section describes how to set up a Master TV for cloning purposes when the TV is in Pass-through Mode. Note: Refer to FTG Mode information on pages 30 to 40 for details on entering FTG Mode and configuring/editing FTG Channel Map and FTG Installer Menu settings. Befor...

Page 12 - Master TV Setup Procedure

12 206-4186 Master TV Setup (Cont.) Typical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Adjust the settings for these Installer Menu items. (Continued on next page) Use the TV setup menus to set the TV features to the desired configuration for the...

Page 13 - CHANNEL; Use Channel Menu options to; PTC will not contain any of the TV setup menu settings.

13 206-4186 Master TV Setup (Cont.) CHANNEL Enter Move (Continued from previous page) 3. Run Auto Tuning. a) To search for all available analog and digital channels, go to the Channel Menu, select the Auto Tuning option, and follow the on-screen instructions. b) Use the Channel Edit option in the Ch...

Page 14 - After verifying the TV Setup, set Installer; WXYZ; Custom text label “WXYZ” created

14 206-4186 (Continued from previous page) 5. (Optional) Add Custom Channel and Aux Input Labels: 2-5-4 + MENU Mode Note: 2-5-4 + MENU Mode enables you to add/edit channel icons and custom text labels in the PTC once the Master TV Setup has been transferred as described in the previous step.Enter th...

Page 15 - Installer Menu; Use the Installer Menu to set up or change operational settings.; Accessing the Installer Menu

15 206-4186 Installer Menu Typical Installer Menu Use the Installer Menu to set up or change operational settings. Refer to the table starting on the next page for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. xxLD340H PTC INSTALLER MENU 000 INSTALL...

Page 18 - Detailed Descriptions of Installer Menu Items; 00 - INSTALLER SEQUENCE

18 206-4186 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Specifies entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The Power Mana...

Page 22 - XYZ; NETWORK

22 206-4186 Channel Icons / Custom Text Labels (2-5-4 + MENU Mode) Changing a Channel’s Icon on the Master TV 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel-Time display. 3. Use the Up/Down arrow keys to select th...

Page 23 - Cloning Overview; IMPORTANT CLONING INFORMATION; step, and cloning may not be successful.; Before you begin cloning:

23 206-4186 Cloning Overview IMPORTANT CLONING INFORMATION There are three different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 11):• Using a USB memory device• Using a TLL-1100A clone programmer• Using a LT2002 clone pr...

Page 24 - USB Cloning Procedure; Learning / Teaching a Master TV Setup using a USB Memory Device

24 206-4186 USB Cloning Procedure Learning / Teaching a Master TV Setup using a USB Memory Device USB Cloning Notes • Read the IMPORTANT CLONING INFORMATION on page 23 before beginning any cloning procedures.• You may edit a filename as part of the Learning procedure; however, a file with edited con...

Page 26 - MPI

26 206-4186 Clone Programmer Cloning Procedures (Cont.) Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. Tune/set the TV to an analog channel or Aux input, and then, plug one ...

Page 30 - FTG Mode of Operation Overview; FTG Mode via CPU or EBL; FTG Mode via CPU; FTG Mode via EBL; figuration Application

30 206-4186 FTG Mode of Operation Overview FTG Mode via CPU or EBL FTG Mode enables Pro:Idiom decryption and also allows logical channel mapping of physical channels. As indicated in the introduction to this document, there are two separate and distinct methods for configuring LD320H/LD325H and LD34...

Page 31 - TV Setup Menus; Shows that the TV is in; Function Menu; in FTG Mode, Installer Menu settings; ASPECT RATIO; Configuration Application; Determining the TV Operating Mode; To determine the operating mode of the TV, press; MENU; on the Installer Remote. The menu display

31 206-4186 FTG Mode of Operation Overview (Cont.) PICTURE AUDIO INPUT OPTION TIME MY MEDIA CHANNEL LOCK TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV (CPU or EBL) is not in Pass-through Mode . While the TV is in FTG Mode, Installer Menu settings can be ac...

Page 33 - Teaching FMA Configuration to a TV

33 206-4186 FTG Mode via CPU (Cont.) 1. Plug the USB memory device that contains the FMA Configuration file into the Target LD320H/LD325H or LD340H/LD345H TV USB IN port. 2. Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is alre...

Page 34 - Learning an FMA Configuration File from a TV

34 206-4186 Learn From TV (FMA) Select the file name and press OK to start xx0BAL-PLAT200001.FMA Return Enter ► ► USB Download Menu Upgrade TV SoftwareUpgrade PTC SoftwareTeach To TV (TLL)Teach To TV (FMA)Learn From TV (TLL) Learn From TV (FMA) Return Enter Learn From TV UPDATING... Do not unplug! !...

Page 35 - Optional Manual Configuration / TV Setup

35 206-4186 FTG Mode via CPU (Cont.) Typical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Use Channel Menu options to run Auto Tuning and edit the channel lineup, as necessary. Adjust the settings for these Installer Menu items. 117 FACT DEFAULT 00...

Page 36 - Rear Jack Panel

36 206-4186 AUDIO IN (RGB/DVI) RS-232C IN (SERVICE ONLY) . . . . . . . . . VIDEO L/MONO -AUDIO- R AV IN 1 TV-LINK CFG GAME CONTROL/ MPI REMOTE CONTROL OUT COMPONENT IN R L P B Y P R VIDEO AUDIO ANTENNA IN Laptop PC The following steps outline local FTG configuration of individual TV EBLs using a dir...

Page 37 - FTG Channel Map Configuration Utility; PRINT MAP; FTG Device Configuration Application Utilities Overview; WRITE

37 206-4186 FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to build a Channel Map with logical channel numbers. Note: Write, Read, and Learn functions in the FTG Channel Map Configuration Utility are used for direct PC-to-TV FTG configuration of LD320H/LD...

Page 38 - FTG Device Configuration Application Utilities Overview (Cont.); FTG Channel Map Editor

38 206-4186 FTG Device Configuration Application Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical...

Page 39 - FTG Installer Menu Configuration Utility

39 206-4186 WRITE Click to transfer the FTG Installer Menu settings to the EBL. FTG Device Configuration Application Utilities Overview (Cont.) CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. HOSPITAL-GRADE TV ONLY Set Hospital items on Installer Menu for hosp...

Page 40 - when copied to the list. If you make any change(s) to the current data; FMA CONFIGURATION LIST; FMA Configuration Utility; Configuration Utility are used to configure

40 206-4186 Note: The data referenced in the FMA Configuration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included in the FMA Configuration List, you will need to recopy Channel...

Page 41 - Remote Jack Pack Setup; RJP AVAILABLE; TV Connections; Remote Jack Pack / TV Connections & Setup; RJP

41 206-4186 Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 001). See Installer Menu detailed descriptions for further informati...

Page 42 - Reference: Upgrading TV/PTC Software using a USB Memory Device; Upgrading TV/PTC Software; Typical Installer

42 206-4186 Reference: Upgrading TV/PTC Software using a USB Memory Device Upgrading TV/PTC Software Before you begin, note that the software upgrade files must be stored in a folder named “LG_DTV” in the root directory of the USB memory device. Also, ensure the USB device has been formatted with FA...

Page 43 - Reference: Downloading a Splash Screen using a USB Memory Device; Splash Screen Image File Guidelines

43 206-4186 Reference: Downloading a Splash Screen using a USB Memory Device Splash Screen Image File Guidelines • The splash screen image must be a baseline (not progressive) JPEG.• The image should be no larger than 1 MB.• The ideal size for the image is 1366 x 768 pixels or under.• The image file...

Page 44 - Reference: Power Consumption Settings; Back Lighting

44 206-4186 Reference: Power Consumption Settings 26/32/37/42LD320H & 32/37LD325H The following tables assume that Installer Menu item 118 POWER SAVINGS is set to 003 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 100). Item 099 Back Lighting (Static)...

Page 46 - Reference: TV Camport Auto Sense Operation; Selectable

46 206-4186 Reference: TV Camport Auto Sense Operation The Camport Auto Sense function is enabled when: 1. Installer Menu item 034 CAMPORT EN is set to 1 AND 2. Installer Menu item 040 AUTO CAMPORT is enabled (1). Selectable : Can be accessed with INPUT key, direct access, etc. Auto Sense : TV switc...

Page 47 - Reference: TV Aux Input Configuration

47 206-4186 Reference: TV Aux Input Configuration DIRECT ACCESS Tuning TV ENABLE MPI DATA START AUX SOURCE ASSIGN- MENT Installer Menu MPI DATA STATUS TYPE 0x41 SOURCES ENABLED (R/W) DATA STATUS TYPE 0xD2 CURRENT AV SOURCE (R) DATA STATUS TYPE 0x0D AUX SOURCE (R) OLD_ OCV = 0 OLD_ OCV = 1 Source Inp...

Page 49 - Reference: RJP Model List and Input Auto-sensing Hierarchy; Digital Video In

49 206-4186 Reference: RJP Model List and Input Auto-sensing Hierarchy RJP Model List Legacy Models Scaler Models RJP-101M N/A RJP-101ML N/A RJP-110F RJP-210F RJP-110FW RJP-210FW RJP-110W RJP-210W RJP-110WBR RJP-210WBR RJP-110S RJP-210S RJP-120G RJP-220G RJP-120T RJP-220T RJP-201B RJP-301B RJP-202B ...

Page 50 - Mode or on multiple TVs that are currently in FTG Mode.; Installer Menu Item 117 FACT DEFAULT; Map on the Pro:Centric server. Refer to the; Additional FTG Mode via EBL Options; enables you to reset multiple TVs to Pass-through Mode at one time.; will remain in the CPU after the reset is completed.; manual for further information.

50 206-4186 This section describes how to reset factory defaults either on a single TV that is currently in Pass-through Mode or on multiple TVs that are currently in FTG Mode. Note: If the TV(s) is/are currently in FTG Mode, restoring the factory defaults also resets the TV to Pass- through Mode. I...

Page 52 - Reference: Side Connections Panel / RF Antenna & MPI Connections; AV IN 2; USB IN; RF Antenna & MPI Connections; VIDEO IN

52 206-4186 Reference: Side Connections Panel / RF Antenna & MPI Connections AV IN 2 L/MONO -A UDIO - R VIDEO USB IN USB IN Insert USB memory device for software updates, cloning purposes, FTG Mode via CPU configuration, picture/music entertainment, etc., as applicable. Antenna or CATV ANTENNA I...

Page 53 - Troubleshooting; General Troubleshooting; Some Quick and Easy Tips for Resolving Problems

53 206-4186 Troubleshooting General Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptom Possible Cause(s) Possible Solution(s) Installation Cannot direct enter channel number. (TV in Pass-through Mode) Installer Menu item 028 CH. OVERIDE is set to 0, i.e., disabled (recommended s...

Page 54 - Troubleshooting Flow Chart

54 206-4186 Controller Quick Check STATUS LED on PTC Board blinking? Plug into AC Power outlet. TV connected to AC Power? Bad TV Yes No No Yes Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV. POWER LED lit? No Yes Press POWER on LG Installer Rem...

Page 55 - Commercial Mode Check / FTG Operation Troubleshooting; Commercial Mode Check; Symptom; Communication Error

55 206-4186 Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting TV turned ON? Yes No Press POWER on Installer Remote. TV is not in Commercial Mode. Call Technical Support for assistance. TV is in Commercial Mode. No On-screen menu display no longer toggles? Yes Press MENU r...

Page 56 - Clone Programmer Troubleshooting; clone programmer clock from a TV containing the correct time.

56 206-4186 Caution: Do not connect a clone programmer to a PPV card installed in the Master or Target TVs. Also, if the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port. Either of these actions will...

Page 57 - Glossary of Terms; A list of definitions for some of the words found in this guide.

57 206-4186 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV. 300 TO 75 OHM ADAPTER A small device that connects a 2-wire 300...

Page 58 - Document Revision History / Notes; Date; Revision A: New document; LCD TVs

58 206-4186 Document Revision History / Notes Notes Document Revision History Date Description May 2011 Revision A: New document November 2011 Revision B: LD320H/LD325H models added to document, also updates for external MPI control Product documentation is available online at: www.LGsolutions.com/p...