LG 42LBX - Manuals - manualsarea.com

Page 3 - FCC NOTICE; Class B digital device; - Reorient or relocate the receiving antenna.; CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK; NOTE TO CABLE/TV INSTALLER

WARNING / CAUTION 1 WARNING / CAUTION To prevent fire or shock hazards, do not exposethis product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limi...

Page 4 - IMPORTANT SAFETY INSTRUCTIONS; SAFETY INSTRUCTIONS; Do not use this apparatus near water.

IMPORTANT SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS 2 Important safety instructions shall be provided with each apparatus. This information shall be given in a separatebooklet or sheet, or be located before any operating instructions in an instruction for installation for use andsupplied with the appa...

Page 5 - Outdoor use marking :

3 Use only with the cart, stand, tripod, bracket,or table specified by the manufacturer, or soldwith the apparatus. When a cart is used, usecaution when moving the cart/apparatuscombination to avoid injury from tip-over. Never touch this apparatus or antenna duringa thunder or lighting storm. Do not...

Page 6 - CONTENTS

4 CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PREPARATION Accessories . . . . . . . . . . . . . . . . ...

Page 8 - FEATURES OF THIS TV

PREP ARA TION FEATURES OF THIS TV 6 ■ If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is noth-ing wrong with TV. ■ Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, theyhave no adv...

Page 9 - ACCESSORIES; Owner’s Manual; PREPARATION

PREP ARA TION ACCESSORIES 7 1.5V 1.5V Owner’s Manual Batteries 75ohm Round Cable Remote Control Cable Management Ensure that the following accessories are included with your plasma display. If an accessory is missing, pleasecontact the dealer where you purchased the product. User must use shielded s...

Page 10 - FRONT PANEL INFORMATION; • Illuminates red in standby mode.; NOTE; : If your product has a protection tape attached, remove the tape.

PREP ARA TION FRONT PANEL INFORMATION PREPARATION 8 CH VOL CH VOL ENTER MENU INPUT /I CH VOL CHANNEL( D D , E E ) Buttons VOLUME( F F , G G ) Buttons ENTER Button MENU Button INPUT Button POWER Button Remote Control Sensor Intelligent Eye Adjusts picture according tothe surrounding conditions. Power...

Page 11 - BACK PANEL INFORMATION; Here shown may be somewhat different from your TV.; USB Input port; COMPONENT IN

PREP ARA TION BACK PANEL INFORMATION 9 ■ Here shown may be somewhat different from your TV. AV IN 2 L/ MONO R AUDIOA VIDEO S-VIDEO USB IN RGB /DVI ANTENNA/CABLE IN USB Input port 10 RGB RGB /DVI /DVI ANTENNA/ ANTENNA/CABLE IN CABLE IN 1 3 2 4 5 9 8 7 6 HDMI/DVI IN Connect a HDMI signal to 1, 2 or 3....

Page 12 - ATTACHING THE TV TO A WALL; Ensure the eye-bolts or brackets are tightened securely.

PREP ARA TION ATTACHING THE TV TO A WALL PREPARATION 10 We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,potentially causing injury or damaging th...

Page 13 - BACK COVER FOR WIRE ARRANGEMENT; EXTERNAL EQUIPMENT SETUP; Do not hold the; when moving the product.; How to remove the cable management

PREP ARA TION BACK COVER FOR WIRE ARRANGEMENT 11 ■ Here shown may be somewhat different from your TV. Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Install the C C A A B B LL E E M M A A N N A A G G E E M M E E N N T T as shown. (Inser...

Page 14 - DESKTOP PEDESTAL INSTALLATION; VESA WALL MOUNTING; There 4 threaded holes are available for attaching the bracket.

PREP ARA TION DESKTOP PEDESTAL INSTALLATION PREPARATION 12 For proper ventilation, allow a clearance of 4inches on all four sides from the wall. VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket....

Page 15 - ANTENNA OR CABLE CONNECTION; For optimum picture quality, adjust antenna direction if needed.; Antenna

PREP ARA TION ANTENNA OR CABLE CONNECTION 13 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable BoxConnections. For optimum picture quality, adjust antenna direction if needed. 2. Cable Wall Antenna Socket OutdoorAntenna(VHF, UHF) Cable TVWall Jack Multi-family Dwe...

Page 16 - HD RECEIVER SETUP; When connecting Component cable; Signal

EXTERNAL EQUIPMENT SETUP 14 HD RECEIVER SETUP EXTERNAL EQUIPMENT SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if youdo receive digital signals from a digital set-top box or other digital external device, refer to the figure asshown be...

Page 17 - When connecting HDMI cable; Horizontal

15 EXTERNAL EQUIPMENT SETUP ( ) RGB IN COMPONENT IN AUDIO (RGB/DV RGB(PC) 1 2 VIDEO ( ) HDMI/DVI IN 1 2 3 HDMI-DTV OUTPUT ( ) When connecting HDMI cable Connect the digital set-top box to H H D D M M II // D D V V II II N N 1 1, 2 2 or 3 3 jack on the set. No separated audio connection is necessary....

Page 18 - When connecting HDMI to DVI cable

EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP 16 When connecting HDMI to DVI cable ( ) ( ) COMPONENT IN A V IN 1 REMOTE CONTROL IN 1 2 RS-232C IN (CONTROL & SERVICE) VIDEO AUDIO AUDIO OUT OPTICAL COAXIAL VIDEO MONO ( ) AUDIO S-VIDEO HDMI/DVI IN 1 2 3 RGB IN AUDIO (RGB/DVI) L R DVI-DTV OUTPUT...

Page 19 - DVD SETUP; Component Input ports

EXTERNAL EQUIPMENT SETUP DVD SETUP 17 Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Y P B P R Video output ports on DVD player Y Y Y Y P B Pb B-Y Cb P R Pr R-Y Cr VI IN AUDIO (RGB/DVI) RGB(PC) REM CONT...

Page 20 - When connecting with an S-Video cable

EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP 18 When connecting with an S-Video cable ( ) RGB IN COMPONENT AUD (RGB/ RGB(PC) 1 2 VIDEO ( ) HDMI/DVI IN 1 2 3 HDMI-DVD OUTPUT ( ) ( ) ( ) REMOTE CONTROL IN RS-232C IN (CONTROL & SERVICE) UDIO AUDIO OUT OPTICAL COAXIAL MONO ( ) AUDIO S-VIDEO A V...

Page 21 - VCR SETUP; When connecting with an antenna; Wall Jack

EXTERNAL EQUIPMENT SETUP VCR SETUP 19 When connecting with an antenna ■ To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. L R S-VIDEO VIDEO OUTPU...

Page 23 - PC SETUP; When connecting D-sub 15 pin cable

EXTERNAL EQUIPMENT SETUP PC SETUP 21 This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. G G Check the image on your TV. There may be noise associatedwith the resolution, vertical pattern, contrast or brightness inPC mode. If noise is present, c...

Page 25 - NOTES

EXTERNAL EQUIPMENT SETUP 23 G G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G G Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is pre- sent, change the PC output ...

Page 26 - Screen Setup for PC mode; Overview

EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP 24 Screen Setup for PC mode Overview When the RGB input of the set is connected to a PC Output,Select RGB-PC with using the II N N P P U U T T button on the remote control. When you change the resolution, select the proper resolutionin present input ...

Page 27 - Initializing (Reset to original factory values); To initialize the adjusted values.

25 EXTERNAL EQUIPMENT SETUP Resolution Position G G Size Phase Reset Move Prev Resolution Position Size Phase Reset G G Initialize Settings. Yes No Prev Select OK R Reesso ollu uttiio on n XGA (1024, 1280, 1360) isn’t distinguished because of havingthe same H/V Sync Time. This function is you to sel...

Page 28 - OTHER A/V SOURCE SETUP; Camcorder; Video Game Set; USB IN SETUP

EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP EXTERNAL EQUIPMENT SETUP 26 Camcorder Video Game Set Connect the A A U U D D II O O/V V II D D E E O O jacks between TV and external equipment.Match the jack colors.(Video = yellow, Audio Left = white, andAudio Right = red) 1. How to connect 2. How to ...

Page 29 - AUDIO OUT SETUP; Analog

EXTERNAL EQUIPMENT SETUP AUDIO OUT SETUP 27 Send the TV’s audio to external audio equipment via the Audio Output port. G G When connecting with external audio equipment, such as amplifers or speakers, please turn the TV speakers off.( G G p p ..6 62 2 ) NOTE G G Do not look into the optical output p...

Page 30 - REMOTE CONTROL FUNCTIONS; WATCHING TV /CHANNEL CONTROL; mode control; buttons

W A TCHING TV / CHANNEL CONTR OL REMOTE CONTROL FUNCTIONS WATCHING TV /CHANNEL CONTROL 28 APM CC AUTO DEMO M/C EJECT TV INPUT TV INPUT STB STB MENU BRIGHT + BRIGHT - TIMER RATIO SIMP LINK BACK BACK TV INPUT STB BACK TV INPUT STB BACK PICTURE SOUND SAP CC MARK USB EJECT MEDIA HOST MEDIA HOST MEDIA HO...

Page 31 - for the selected product can control the TV.; Inside the Sliding Cover; Select the appropriate type of sound for; Installing Batteries

29 W A TCHING TV / CHANNEL CONTR OL TV INPUT STB BACK TV INPUT STB BACK TV INPUT STB BACK BACK PICTURE PICTURE SOUND SOUND SAP SAP CC CC MARK MARK USB EJECT USB EJECT MEDIA HOST MEDIA HOST MEDIA HOST Turns your T V or any other programmed equipment on or off, depending on the mode. In AV 1-2, Compon...

Page 32 - TURNING ON TV; VOLUME ADJUSTMENT; Adjust the volume to suit your personal preference.

W A TCHING TV / CHANNEL CONTR OL TURNING ON TV WATCHING TV /CHANNEL CONTROL 30 TV INPUT STB PICTURE PICTURE PICTURE SOUND SOUND SAP SAP CC CC MARK USB EJECT BACK BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT STB BACK PICTURE SOUND CC MARK USB EJECT TV INPUT STB BACK PICTURE SOUND SAP...

Page 33 - ON-SCREEN MENUS SELECTION; ME

W A TCHING TV / CHANNEL CONTR OL ON-SCREEN MENUS SELECTION 31 Press the M ME EN NU U button and then use D D or E E button to select each menu. Press the G G button and then use D D E E F F G G button to display the available menus. Your TV's OSD (On Screen Display) may differ slightly from what is ...

Page 34 - CHANNEL SETUP

W A TCHING TV / CHANNEL CONTR OL CHANNEL SETUP WATCHING TV /CHANNEL CONTROL 32 Auto Tuning G Manual Tuning Channel Edit Selection ( G or ) leads you to the Auto Tuning screen. TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT STB BACK PICT...

Page 36 - ENTER; Channel Editing

W A TCHING TV / CHANNEL CONTR OL WATCHING TV /CHANNEL CONTROL 34 Press the M ME EN NU U button and then use D D or E E button to select the S SE ET TU UP P menu. Press the G G button and then use D D or E E button to select C C h h aa n n n n ee ll E E d d ii tt. Press the G G button. You will now s...

Page 37 - INPUT LIST

W A TCHING TV / CHANNEL CONTR OL INPUT LIST 35 Antenna Cable AV 1 AV 2 Component1 E E Input List AV 2 Press the IIN NP PU UT T button to display external device that is con- nected to the unit, on screen. Press the E EN NT TE ER R button to change the input to the active external device. Use the D D...

Page 38 - This operates only for the devices with the; SimpLink Preparations

W A TCHING TV / CHANNEL CONTR OL WATCHING TV /CHANNEL CONTROL 36 WATCHING TV /CHANNEL CONTROL This operates only for the devices with the logo. Please check the logo. This allows you to control and play other AV devicesconnected to the display through HDMI cable without addi-tional cables and settin...

Page 39 - SimpLink Functions; SimpLink Menu

W A TCHING TV / CHANNEL CONTR OL 37 SimpLink Functions D D ii rr ee cc tt P P ll aa y y After connecting AV devices to TV, you can directly control the devices and play mediawithout additional settings. S S ee ll ee cc tt A A V V d d ee vv ii cc ee Enables you to select one of AV devices connected t...

Page 40 - INPUT LABEL

W A TCHING TV / CHANNEL CONTR OL INPUT LABEL WATCHING TV /CHANNEL CONTROL 38 WATCHING TV /CHANNEL CONTROL Sets a label to each input source which is not in use whenyou press INPUT button. Press the M ME EN NU U button and then use D D or E E button to select the O OP PT TIIO ON N menu. Press the G G...

Page 41 - ENTRY MODES; When you connect a USB device or press the

MEDIA HOS T 39 ENTRY MODES MEDIA MEDIA MEDIA HOST HOST HOST MEDIA HOST When you connect a USB device or press the button, this screen is displayed, automatically. In USB device, you can not add a new folder or delete the existing folder. MEDIA HOST MEDIA HOST Press the D D or E E button to select th...

Page 42 - PHOTO LIST; Screen Components; Current page/Total pages

PHOTO LIST MEDIA HOS T MEDIA MEDIA HOST HOST MEDIA MEDIA HOST HOST 40 Screen Components Current page/Total pages Total number of marked thumbnail photos Corresponding buttons on the remote control Usable USB memory It’s available to playback the photo file (*.jpg) in the USB device. The On Screen Di...

Page 43 - Photo Selection and PopUp Menu; As shown, up to 15 thumbnail photos are listed per page.

41 MEDIA HOS T Photo Selection and PopUp Menu As shown, up to 15 thumbnail photos are listed per page. Use the C C H H (( D D or E E )) button to navigate in the thumbnail photo page. Use the M MA AR RK K button to mark or unmark a photo. When one or more photos are marked, you can view individual p...

Page 44 - Set up the menu in Full-Sized Screen

MEDIA HOS T MEDIA MEDIA HOST HOST MEDIA MEDIA HOST HOST 42 Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USBdevice, on a full-sized screen. Detailed operations are available on full-sized photo view screen. Use the C C H H (( D D or E E )) button to n...

Page 46 - MUSIC LIST; Music file on your USB device can be played by this unit.

MUSIC LIST MEDIA HOS T MEDIA MEDIA HOST HOST MEDIA MEDIA HOST HOST 44 Purchased music files (*.MP3) may contain copyright restrictions.Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from you...

Page 47 - Music Selection and PopUp Menu; As shown , up to 8 music titles are listed per page.; but

MEDIA HOS T 45 Use the C C H H (( D D or E E )) button to navigate in the music titles page. Use M MA AR RK K button to mark or unmark a music. When one or more music files are marked, the marked musics will be playedin sequence. For example, if you want to listen to only onemusic repeatedly, just m...

Page 48 - PICTURE CONTROL; Set by program; Press the

46 PICTURE CONTR OL PICTURE SIZE (ASPECT RATIO) CONTROL PICTURE CONTROL Set by program Selects the proper picture proportion to matchthe source’s image. 4:3 Choose 4:3 when you want to view a picturewith an original 4:3 aspect ratio. 16:9 Adjust the picture horizontally, in a linear pro-portion to f...

Page 49 - PRESET PICTURE SETTINGS; Settings are preset for

47 PICTURE CONTR OL PRESET PICTURE SETTINGS Picture Mode -Preset Press the P PIIC CT TU UR RE E button repeatedly to select the picture appearance setup option as shown below :IIn ntteelllliig geen ntt E Ey yee , D Dy yn naam miicc , S Sttaan nd daarrd d , M Miilld d , U Usseerr1 1 , and U Usseerr2 ...

Page 50 - is automatically change.

48 Color Tone -Preset Choose one of three automatic color adjustments. Set towarm to enhance hotter colors such as red, or set to cool tosee less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standardand Mild), C Co ollo orr T Teem mp peerraattu urree is automatically ...

Page 51 - MANUAL PICTURE ADJUSTMENT; Picture Mode -User Mode

PICTURE CONTR OL MANUAL PICTURE ADJUSTMENT 49 Picture Mode -User Mode Press the M ME EN NU U button and then use D D or E E button to select the P PIIC CT TU UR RE E menu. Press the G G button and then use D D or E E button to select P Piiccttu urree M Mo od dee. Press the G G button and then use D ...

Page 52 - Usse; Color Tone -User Mode

PICTURE CONTR OL PICTURE CONTROL 50 You can also adjust the detailed settings(Red, Green, Blue)by selecting the U Usse err menu. This feature operate only if the picture mode set U Usseerr 1 1 or U Usseerr 2 2 . Press the M ME EN NU U button and then use D D or E E button to select the P PIIC CT TU ...

Page 53 - XD - PICTURE IMPROVEMENT TECHNOLOGY

PICTURE CONTR OL XD - PICTURE IMPROVEMENT TECHNOLOGY 51 Press the M ME EN NU U button and then use D D or E E button to select the P PIIC CT TU UR RE E menu. Press the G G button and then use D D or E E button to select X X D D. Press the G G button and then use F F or G G button to select A Au utto...

Page 56 - And when HDMI is set to the PC in

PICTURE CONTR OL ADVANCED - TruM PICTURE CONTROL 54 TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIGHT + BRIGH T - TIMER RATIO SIMPLINK BACK PICTURE SOUND CC MARK USB EJECT MENU TV INPUT STB BACK PICTURE SOUND SAP MA...

Page 57 - TruM DEMO

PICTURE CONTR OL TruM DEMO 55 TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIGHT + BRIGH T - TIMER RATIO SIMPLINK BACK PICTURE SOUND CC MARK USB EJECT MENU TV INPUT STB BACK PICTURE SOUND SAP MARK USB EJECT TV INPUT ...

Page 58 - PICTURE RESET

PICTURE CONTR OL PICTURE RESET PICTURE CONTROL 56 Press the M ME EN NU U button and then use D D or E E button to select the P PIIC CT TU UR RE E menu. Press the G G button and then use D D or E E button to select P Piiccttu urree R Reesseett. Press the G G button to reset the Picture menu options t...

Page 59 - AUTO VOLUME LEVELER (AUTO VOLUME; SOUND; SOUND & LANGUAGE CONTROL

AUTO VOLUME LEVELER (AUTO VOLUME ) SOUND & LANGU A GE CONTR OL SOUND & LANGUAGE CONTROL 57 Scans for changes in sound levels during commercials, thenadjusts the sound to match the specified audio level. AutoVolume makes sure that the volume level remains consistentwhether you are watching a ...

Page 60 - Press

SOUND & LANGU A GE CONTR OL PRESET SOUND SETTINGS (SOUND MODE) SOUND & LANGUAGE CONTROL 58 Sound Mode lets you enjoy the best sound without any special adjust-ment because the TV sets the appropriate sound options based on theprogram content. Standard, Music, Movie, Sports and User are prese...

Page 61 - SOUND SETTING ADJUSTMENT - USER MODE; Adjust the sound to suit your taste and room situations.

SOUND SETTING ADJUSTMENT - USER MODE SOUND & LANGU A GE CONTR OL 59 Front Surround 3D EchoSound System TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIGHT + BRIGH T - TIMER RATIO SIM PLINK BACK PICTURE SOUND CC MA...

Page 62 - BALANCE; Adjust the left/right sound of speaker to suit your taste and

SOUND & LANGU A GE CONTR OL BALANCE SOUND & LANGUAGE CONTROL 60 TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIGHT + BRIGHT - TIMER RATIO SIM PLINK BACK PICTURE SOUND CC MARK USB EJECT MENU TV INPUT STB BACK ...

Page 63 - STEREO/SAP BROADCAST SETUP; Stereo or SAP can be received in Analog channel.

STEREO/SAP BROADCAST SETUP SOUND & LANGU A GE CONTR OL 61 TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT STB BACK BACK PICTURE PICTURE SOUND SOUND SAP CC CC MARK MARK USB EJECT USB EJECT TV INPUT STB BACK PICTURE SOUND SAP MARK USB ...

Page 64 - TV SPEAKERS ON/OFF SETUP

SOUND & LANGU A GE CONTR OL TV SPEAKERS ON/OFF SETUP SOUND & LANGUAGE CONTROL 62 TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIGHT + BRIGH T - TIMER RATIO SIMPLINK BACK PICTURE SOUND CC MARK USB EJECT MENU T...

Page 65 - AUDIO LANGUAGE; This feature operate only in DTV/CADTV mode.

AUDIO LANGUAGE SOUND & LANGU A GE CONTR OL 63 Other languages may be available if a digital signal is pro-vided by the broadcasting station. This feature operate only in DTV/CADTV mode. TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT...

Page 66 - ON-SCREEN MENUS LANGUAGE SELECTION

SOUND & LANGU A GE CONTR OL ON-SCREEN MENUS LANGUAGE SELECTION SOUND & LANGUAGE CONTROL 64 Press the M ME EN NU U button and then use D D or E E button to select the O OP PT TIIO ON N menu. Press the G G button and then use D D or E E button to select LLaan ng gu uaag gee. Press the G G butt...

Page 67 - CAPTION MODE; C C

CAPTION MODE SOUND & LANGU A GE CONTR OL 65 TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT STB BACK PICTURE SOUND CC MARK USB EJECT TV INPUT STB BACK PICTURE PICTURE SOUND SOUND SAP SAP CC MARK MARK USB EJECT USB EJECT TV INPUT STB ...

Page 68 - Analog Broadcasting System Captions; r i

SOUND & LANGU A GE CONTR OL SOUND & LANGUAGE CONTROL 66 TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIGHT + BRIGH T - TIMER RATIO SIMPLINK BACK PICTURE SOUND CC MARK USB EJECT MENU TV INPUT STB BACK PICTURE ...

Page 69 - This function in only available when; Caption; Mode is set; On; Digital Broadcasting System Captions

SOUND & LANGU A GE CONTR OL 67 TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIGHT + BRIGH T - TIMER RATIO SIMPLINK BACK PICTURE SOUND CC MARK USB EJECT MENU TV INPUT STB BACK PICTURE SOUND SAP MARK USB EJECT TV I...

Page 71 - CLOCK SETTING; TIME SETTING; The time is set automatically from a digital channel signal.; Auto Clock Setup

TIME SETTING CLOCK SETTING TIME SETTING 69 The time is set automatically from a digital channel signal. The digital channel signal includes information for the cur-rent time provided by the broadcasting station. Set the clock manually if the current time is set incorrectlyby the auto clock function....

Page 72 - If the current time setting is wrong, reset the clock manually.; Manual Clock Setup

TIME SETTING TIME SETTING 70 TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIGHT + BRIGH T - TIMER RATIO SIMPLINK BACK PICTURE SOUND CC MARK USB EJECT MENU TV INPUT STB BACK PICTURE SOUND SAP MARK USB EJECT TV INPUT S...

Page 73 - AUTO ON/OFF TIME SETTING; The TV must be in standby mode for the On-Time to work.

TIME SETTING AUTO ON/OFF TIME SETTING 71 The timer function operates only if the current time hasbeen set. The Off-Time function overrides the On-Time function ifthey are both set to the same time. The TV must be in standby mode for the On-Time to work. If you do not press any button within 2 hours ...

Page 74 - SLEEP TIME SETTING; The Sleep Time turns the TV off at the preset time.

TIME SETTING SLEEP TIME SETTING TIME SETTING 72 Press the T TIIM ME ER R button repeatedly to select the number of minutes. First the O Offff option appears on the screen, followed by the following Sleep Time options : 10, 20, 30, 60, 90, 120, 180, and 240 minutes. When the number of minutes you wan...

Page 75 - AUTO SHUT-OFF SETTING

TIME SETTING AUTO SHUT-OFF SETTING 73 TV will be automatically turned off, in case of no signal inTV& input source or no remote control input for 10 minutes. Press the M ME EN NU U button and then use D D or E E button to select the T TIIM ME E menu. Press the G G button and then use D D or E E ...

Page 76 - PARENTAL CONTROL / RATINGS; V-Chip rating and categories; SET PASSWORD & LOCK SYSTEM; Setting up your Password

PARENT AL CONTR OL / R A TING PARENTAL CONTROL / RATINGS 74 Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratingssent by the broadcasting station. The default setting is...

Page 77 - Set Password

PARENT AL CONTR OL / R A TING 75 Lock System After inputting the password, use the D D or E E button to choose LLo occkk S Sy ysstteem m. Press the G G button and then use the D D or E E to select O O n n or O Offff. ■ When you select, the Lock System is enable. Press E EX XIIT T button to return to...

Page 78 - CHANNEL BLOCKING; PARENTAL CONTROL /RATINGS; For USA

PARENT AL CONTR OL / R A TING CHANNEL BLOCKING PARENTAL CONTROL /RATINGS 76 Blocks any channels that you do not want to watch or thatyou do not want your children to watch. After inputting the password, use the D D or E E button to choose B Bllo occkk C Ch haan nn neell. Press the G G button. You wi...

Page 79 - for USA only; E X

PARENT AL CONTR OL / R A TING 77 Movie Rating(MPAA) - for USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratingsabove a specified level. Keep in mind that the movie ...

Page 80 - TV Rating Children; TV Rating General

PARENT AL CONTR OL / R A TING TV Rating Children - for USA only PARENTAL CONTROL /RATINGS 78 After inputting the password, use the D D or E E button to choose T TV V R Raattiin ng g--C Ch hiilld drreen n. Press the G G button and then use the D D or E E to select A Ag gee, or FFaan nttaassy y V Viio...

Page 81 - TV Rating english; Selecting canadian english language rating system.; TV Rating french; Selecting canadian french language rating system.

PARENT AL CONTR OL / R A TING TV Rating english - for CANADA only 79 After inputting the password, use the D D or E E button to choose T TV V R Raattiin ng g--E En ng glliissh h. Press the G G button and then use the D D or E E button to select E E, C C, C C8 8+ +, G G, P P G G, 1 14 4+ +, 1 18 8+ +...

Page 82 - EXTERNAL INPUT BLOCKING; KEY LOCK

PARENT AL CONTR OL / R A TING EXTERNAL INPUT BLOCKING PARENTAL CONTROL /RATINGS 80 Enables you to select a source to block from the externalsource devices you have hooked up. After inputting the password, use the D D or E E button to choose IIn np pu utt B Bllo occkk. Press the G G button and then u...

Page 83 - TROUBLESHOOTING; APPENDIX

APPENDIX TROUBLESHOOTING 81 APPENDIX No picture & No sound No or poor color or poor picture Poor reception on some channels Lines or streaks in pictures Horizontal/vertical bars or picture shaking Picture appears slowly after switching on ■ Check whether the product is turned on. ■ Try another c...

Page 85 - MAINTENANCE; Cleaning the Screen; Please be sure not to use a wet cloth.; Extended Absence

83 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you canenjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust of...

Page 86 - PRODUCT SPECIFICATIONS

APPENDIX PRODUCT SPECIFICATIONS APPENDIX 84 ■ The specifications shown above may be changed without prior notice for quality improvement. 42LBX (42LB9DF-UA) 47LBX (47LB9DF-UA) 52LBX (52LB9DF-UA) MODELS 40.6 x 30.7 x 13.8 inches 1030.0 x 781.0 x 350.0 mm 40.6 x 27.3 x 3.5 inches 1030.0 x 693.0 x 88.5...

Page 87 - PROGRAMMING THE REMOTE CONTROL; Programming a code into a remote mode

APPENDIX PROGRAMMING THE REMOTE CONTROL 85 Programming a code into a remote mode To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote. After that, press the P PO OW WE ER R button...

Page 88 - Remote control code; VCRs

APPENDIX Remote control code APPENDIX 86 VCRs Brand Codes Brand Codes Brand Codes AIWA 034 AKAI 016 043 046 124125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 033 041DAEWOO 005 007 010 064065 10...

Page 89 - HDSTB

APPENDIX 87 Brand Codes Brand Codes Brand Codes HDSTB ALPHASTAR DSR 123 AMPLICA 050 BIRDVIEW 051 126 129 CHANNEL MASTER 013 014 015 018 036 055 CHAPARRAL 008 009 012 077 CITOH 054 CURTIS MATHES 050 145DRAKE 005 006 007 010 011 052 112 116 141 DX ANTENNA 024 046 056 076 ECHOSTAR 038 040 057 058093 09...

Page 90 - Audio

APPENDIX APPENDIX 88 Brand Codes Brand Codes Brand Codes Audio AIWA 014 028 070 096125 129 139 229230 AKAI 163 ANAM 003 014 017 023059 106 189 216217 235 236 BURMECTER 252 CARVER 086 CLARION 199 DAEWOO 027 053 060 084102 148 198 221 DENON 015 075 130 143 FANTASIA 071 FINEARTS 022 FISHER 089 099 LG(G...

Page 91 - IR CODES; Configuration of frame; Remote Control IR Codes; Output waveform

APPENDIX IR CODES 89 ■ Configuration of frame 1st frame Repeat frame ■ Lead code ■ Repeat code ■ B B ii tt d d ee ss cc rr ii p p tt ii o o n n ■ FF rr aa m m ee ii n n tt ee rr vv aa ll :: T T ff The waveform is transmitted as long as a key is depressed. C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6...

Page 93 - EXTERNAL CONTROL THROUGH RS-232C; Note: RS-232C connection cables are not supplied with the product.; PC; Pin Name

APPENDIX EXTERNAL CONTROL THROUGH RS-232C 91 RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computeror an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the p...

Page 94 - Use this function to specify a TV ID number.; Communication Parameters

APPENDIX APPENDIX 92 Press the M ME EN NU U button and then use D D or E E button to select the O OP PT TIIO ON N menu. Press the G G button and then use D D or E E button to select S SE ET T IID D. Press the G G button and then use D D or E E button to adjust S SE ET T IID D to choose the desired T...

Page 95 - Command Reference List

APPENDIX 93 Command Reference List C C O O M M M M A A N N D D 1 1 C C O O M M M M A A N N D D 2 2 DATA (Hexadecimal) C C O O M M M M A A N N D D 1 1 C C O O M M M M A A N N D D 2 2 DATA (Hexadecimal) 01.Power k a 0 ~ 1 02.Input Select k b 0 ~ 9 03. Input Select x b * 04.Aspect Ratio k c * 05.Screen...

Page 96 - Transmission / Receiving Protocol

APPENDIX APPENDIX 94 Transmission / Receiving Protocol T T rr aa n n ss m m ii ss ss ii o o n n [Command 1] : First command to control the set. (j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustmen...

Page 100 - Step

APPENDIX APPENDIX 98 Data5: All data are transmitted by Hexadecimal code * Two/One part Channel: 6th bit This bit is used in a cable-ready system. * Using physical channel: 5th bit If the channel band is NTSC air or NTSC cable, channeltuning can be done by only physical channel. In thiscase, using p...