LG 30FZ1DC, 32FZ1DC-UB - Manuals

Page 2 - P A G E 2; P O W E R C O R D P O L A R I Z AT I O N :; REGULATORY INFORMATION:; Reorient or relocate the receiving antenna.

P A G E 2 WA R N I N G / C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presenc...

Page 3 - P A G E 3; IMPORTANT SAFETY INSTRUCTIONS

P A G E 3 IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet orsheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appa-ratus. Thi...

Page 4 - P A G E 4

P A G E 4 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or ...

Page 5 - P A G E 5; Table of Contents

P A G E 5 Table of Contents Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Important Safety Instructions . . . . . . . . . . . . . . . . .3-4 Step 1. Hook Up TV Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . .6Rear Connections Panel . . . . . . . . . . ...

Page 6 - P A G E 6; Front Panel Controls; power; - Here shown may be somewhat different from your TV.

P A G E 6 Front Panel Controls power Standby indicator (Illuminates brightly when the TV isin standby mode. Dims when the TV is switched on.) Remote control sensor TV/VIDEO menu vol left/ rightVolume( G ) button increases the sound level and vol- ume( F ) button decreases the sound level. ch (Channe...

Page 7 - P A G E 7; Rear Connections Panel; Mini glossary; Video 1, 2 and 3 Inputs; Digital Audio

P A G E 7 Rear Connections Panel Mini glossary JACK A connection on the back of a TV, VCR, or any other A/V device. This includes the RF jack and the Audio/Video jacks that are color-coded. SIGNAL Picture and sound traveling through cable, or over the air, to your television screen. CALIBRATION DIGI...

Page 8 - P A G E 8; Front Connections Panel; Video in

P A G E 8 Front Connections Panel Front A/V Panel S-VIDEO VIDEO IN L/MONO AUDIO R FRONT VIDEO There are four jacks on the lower-right frontfront of your TV that make connectingAudio/Video devices like video games andcamcorders very simple. The jacks are like those found on the backjack connection pa...

Page 9 - P A G E 9; Antenna / Cable Service Hookup; TV; CADTV

P A G E 9 Antenna / Cable Service Hookup 1 Connect an antenna and/or cable service toyour TV as shown. Turn to page 19 to do a channel searchwith EZ Scan. For best signal reception, it is recommended to have your Antenna professionally adjusted. 2 If you receive your RF signal through anantenna that...

Page 10 - Cable Box Connections

P A G E 1 0 Cable Box Connections If you’re using a cable box, leave the TV onchannel 3 or 4 and use your cable box tochange channels. Locate the output jack on the back ofyour cable box. Connect this to the Cablejack on the back of your TV. Or find the composite video and audiojacks on the back of ...

Page 11 - VCR Connections; or

P A G E 1 1 VCR Connections 1 Locate the Cable jack on the backof your TV. Connect this to outjack on the back of your VCR. Or find the composite video andaudio jacks on the back of yourVCR, and connect them followingthe instructions provided withyour equipment. You may connect either the com-posite...

Page 12 - DVD Player; Component Input ports

P A G E 1 2 DVD Player Mini glossary COMPONENT VIDEO Some video equipment uses three separate lines (Y, P B , P R ) to more precisely reproduce images. Your manual will explain how this relates to your equipment. 1 2 CALIBRATION DIGITAL AUDIO OUTPUTOPTICAL D V D / D T V I N P U T V I D E O A U D I O...

Page 13 - The DTV shows the sharpest picture in 720p/1080i mode.; Y P

P A G E 1 3 Set-top box Hookup Find the audio and Y, P B , P R jacks or HDMI/DVI output port on the back ofyour set-top box and connect them fol-lowing the instructions provided withyour equipment. Connect these cables to your TV asshown. 1 2 Digital Audio Optical Output Audio L R Component Out Y Pb...

Page 14 - Digital Audio Output

P A G E 1 4 Digital Audio Output Connect one end of an optical cable tothe TV Digital Audio Optical Output port. Connect the other end of the optical cableto the digital audio optical input on theaudio equipment. See the external audio equipment instruc-tion manual for operation. 1 2 Digital AudioOp...

Page 15 - HDMI; How to connect

P A G E 1 5 HDMI - HDMI TM , the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC." - This DTV can receive the High-Definition Multimedia Interface(HDMI) or Input of Digital Visual Interface(DVI).- This DTV supports HDCP(High-bandwi...

Page 16 - Remote Control Functions in TV Mode

P A G E 1 6 Remote Control Functions in TV Mode 1 2 3 4 5 6 7 8 9 0 TV MODE TV/VIDEO POWER VIDEO1 FRONT HDMI VCR CABLE DVD SAT MUTE SURROUND FREEZE SAP RATIO INFO RECORD STOP PAUSE REW PLAY FF MENU EXIT TIMER CC SIGNAL VOL CH FAV EZ SOUND EZ PIC COMP2 COMP1 VIDEO2 SKIP DASH(-) FLASHBK FAV Use to scr...

Page 18 - Turning the TV On; Volume; Displays current channel number.; Channel Label

P A G E 1 8 Turning the TV On On-Screen Displays This page describes your on-screen display and information banner options. 10 Mute TV 2-0 MONO 10:00 AM First, connect antenna cable and power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the PO...

Page 20 - Channel Edit

P A G E 2 0 Channel Edit Create two different types of channel lists in memory: “Customlist” and “Favorite channel list” from the default channel listmade in the EZ scan menu. A custom list can be created by toggling each channel on or offwith the (Enter) key. Once a channel is highlighted, you will...

Page 21 - DTV Signal; Press exit button to return to TV viewing.; Using the SIGNAL button; Press EXIT button to return to TV viewing.; Using the menu; Degaussing the Screen

P A G E 2 1 DTV Signal 1 2 Press the SIGNAL button on the remotecontrol. View the on-screen signal strength moni-tor to see the quality of the signal beingreceived. Press exit button to return to TV viewing. 3 Lets you know how strong your DTV signal is and whetheryou need to adjust your antenna or ...

Page 22 - Channel Label Setup; Choose preset labels for your channels.

P A G E 2 2 Channel Label Setup Choose preset labels for your channels. Use Channel +/- on your remote control in the Ch Labelmenu to select a channel for labeling, and choose a suit-able label for your channel by pressing to set thelabel to the selected channel. Press the MENU button on the remotec...

Page 23 - Input Source Selection; Note: Changes the picture source for the screen so you

P A G E 2 3 Input Source Selection Note: Changes the picture source for the screen so you can watch your on-air TV, cable TV, VCR, DVD, orany other devices that are connected to your TV. 1 Use the TV/VIDEO, FRONT, COMP1-2, andHDMI button to select the input source. Each time you press TV/VIDEO butto...

Page 24 - VIDEO Menu; EZ PIC; EZ Picture; Using the EZ PIC button

P A G E 2 4 VIDEO Menu Use the EZ PIC button to select EZ Picture option. Each press of the EZ PIC button change the EZ Picture option: Off, Normal, Digital Preset, Night Time, Movie,Weak Signal, Video Game, and Sports. Press EXIT to save and return to TV viewing. 1 2 This function adjusts the TV to...

Page 25 - Manual Video Control

P A G E 2 5 VIDEO Menu Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the VIDEO menu. Press the RIGHT arrow button to accessthe VIDEO menu. Use the UP/DOWN arrow button to selectone of the following options: Contrast,Brightness, Color, Sharpness, or Tint, then...

Page 26 - Use the UP/DOWN arrow button to select Video Preset.; Video Preset; Use the UP/DOWN arrow button to select Off or On.; XD

P A G E 2 6 VIDEO Menu Press the MENU button on the remote control, then usethe UP/DOWN arrow button to select the VIDEO menu. Press the RIGHT arrow button to access the VIDEOmenu. Use the UP/DOWN arrow button to select Video Preset. Use the RIGHT arrow button to preset the video config-uration. 1 2...

Page 27 - AUDIO Menu; Audio Language

P A G E 2 7 AUDIO Menu Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the AUDIO menu. Press the RIGHT arrow button to accessthe AUDIO menu. Use the UP/DOWN arrow button to selectAudio Language, then press the RIGHTarrow button. Use the UP/DOWN arrow button to ...

Page 28 - EZ Sound; EZ SOUND

P A G E 2 8 AUDIO Menu 1 2 This function lets you enjoy the best sound without any specialadjustment because the TV automatically selects the appropriatesound option based on the program content.Normal, Stadium, News, Music and Theater are preset for goodsound quality at the factory and cannot be ch...

Page 29 - Adjust the sound to suit your taste and room situations.; Manual Sound Control

P A G E 2 9 AUDIO Menu Press the MENU button on the remote control, then usethe UP/DOWN arrow button to select the AUDIO menu. Press the RIGHT arrow button to access the AUDIOmenu. Use the UP/DOWN arrow button to select one of thefollowing options: Balance, Treble, or Bass, then pressthe Right arrow...

Page 30 - Front Surround; Press EXIT to save and return to TV viewing.; Using the SURROUND button

P A G E 3 0 AUDIO Menu Front Surround 1 2 Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the AUDIO menu. Press the RIGHT arrow button to accessthe AUDIO menu. Use the UP/DOWN arrow button to selectFront Surround, then press the RIGHTarrow button. Use the UP/DO...

Page 31 - Auto Clock Setup; • Select the time zone for your viewing

P A G E 3 1 Auto Clock Setup Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the TIME menu option. Press the RIGHT arrow button to go tothe TIME menu. Use the UP/DOWN arrow button to chooseAuto Clock, then press the RIGHT arrowbutton. Use the UP/DOWN arrow butt...

Page 32 - Manual Clock Setup

P A G E 3 2 Manual Clock Setup Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the TIME menu option. Press the RIGHT arrow button to activatethe Time menu. Use the UP/DOWN arrow button to chooseManual Clock, then press the RIGHT arrowbutton. Use the LEFT/RIGHT ...

Page 33 - TV Turn Off Time Setup; Lets you set an automatic daily turn off time for your TV.

P A G E 3 3 TV Turn Off Time Setup Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the TIME menu. Press the RIGHT arrow button to to go tothe TIME menu. Use the UP/DOWN arrow button to chooseOff Timer, then press the RIGHT. Use the UP/DOWN arrow button to choos...

Page 34 - TV Turn On Time Setup; Lets you set an automatic daily turn on time for your TV.

P A G E 3 4 TV Turn On Time Setup Lets you set an automatic daily turn on time for your TV. Off timer function overrides on timer function if they areboth set to the same time. Unless a button is pressed within two hours after the TVis turned on by the On Timer function, the TV will auto-matically t...

Page 35 - Sleep Timer Setup; Using the TIMER button

P A G E 3 5 Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the TIME menu. Press the RIGHT arrow button to go tothe Time menu. Use the UP/DOWN arrow button to chooseSleep Timer then press the RIGHT arrowbutton. Use the UP/DOWN arrow to choose a pre-set turn off...

Page 36 - Auto Off

P A G E 3 6 Auto Off If there is no input signal, the TV can be set up to switchto standby mode automatically after 10 minutes. Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the TIME menu. Press the RIGHT arrow button to go tothe TIME menu. Use the UP/DOWN ar...

Page 37 - Aspect Ratio Control; • Use the UP/DOWN arrow button to adjust the; Using the RATIO button

P A G E 3 7 Aspect Ratio Control Press the MENU button on the remote control, then usethe UP/DOWN arrow button to select the OPTION menu. Press the RIGHT arrow button to go to the OPTIONmenu. Use the UP/DOWN arrow to choose the Aspect Ratiooption, then press the RIGHT arrow button. Use the UP/DOWN a...

Page 38 - Captions; Use the UP/DOWN arrow to choose On or Off.

P A G E 3 8 Captions 1 2 3 4 5 Mini glossary CAPTIONS The term for the words that scroll across the bot-tom of the TV screen; usually the audio portion ofthe program provided for the hearing impaired. TEXT The term for the words that appear in a largeblack frame and almost cover the entire screen;us...

Page 39 - Use the CC button to select caption.; Using the CC button

P A G E 3 9 Captions/Text 1 2 Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the OPTION menu. Press the RIGHT arrow button to activatethe OPTION menu. Use the UP/DOWN arrow button to chooseCaption/Text, then press the Right arrowbutton. Use the UP/DOWN arrow b...

Page 40 - Caption Option Menu

P A G E 4 0 Caption Option Menu 6 Customize the DTV/CADTV captions that willappear on your screen. 1 2 Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the OPTION menu. Press the RIGHT arrow button to accessthe OPTION menu. Use the UP/DOWN arrow to select theCap...

Page 41 - On-Screen Menu Languages

P A G E 4 1 On-Screen Menu Languages Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the OPTION menu. Press the RIGHT arrow button to go tothe OPTION menu. Use the UP/DOWN arrow to choose theLanguage, then press the RIGHT arrowbutton. Use the UP/DOWN arrow butt...

Page 43 - Cinema 3:2 Mode Setup

P A G E 4 3 Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the OPTION menu. Press the RIGHT arrow button to accessthe OPTION menu. Use the UP/DOWN arrow to chooseCinema 3:2 Mode, then press the Rightarrow button. Use the UP/DOWN arrow to choose On orOff. Press...

Page 44 - EZ Demo

P A G E 4 4 EZ Demo Press the MENU button on the remotecontrol, then use the UP/DOWN arrowbutton to select the OPTION menu. Press the RIGHT arrow button to accessthe OPTION menu. Use the UP/DOWN arrow button to selectEZ Demo, then press the RIGHT arrowbutton. Press EXIT button on the remote to stopE...

Page 45 - Parental Lock Setup; Lock System

P A G E 4 5 Parental Lock Setup Press the MENU button on the remote control,then use the UP/DOWN arrow button to selectthe LOCK Menu option. Press the RIGHT arrow button to activate theLOCK Menu. Use the UP/DOWN arrow to choose from thefollowing Lock Menu options. Once the optionsare selected, chang...

Page 46 - PG; Parental Lock Rating Descriptions

P A G E 4 6 TV-Y (All Children): Program is appropriate for all children. TV-Y7 (Children 7 years and Older): Program is designed for children age 7 and above. TV-G (General audience): Most parents would find this program suitable for all ages. TV-PG (Parental guidance suggested): Program contains m...

Page 47 - Programming the Remote; POWER; and

P A G E 4 7 Programming the Remote Test your remote control.To find out whether your remote control canoperate the component without programming,turn on the component such as a VCR and pressthe corresponding mode button (VCR) on theremote control, while pointing at the compo-nent. Test the POWER and...

Page 48 - Programming Codes; VCRs

P A G E 4 8 Programming Codes VCRs Brand Codes AIWA 034 AKAI 016 043 046 124 125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064 065 108 110 111 112 116 117 119 DAYTR...

Page 50 - CATV

P A G E 5 0 Programming Codes CATV Brand Codes ABC 003 004 039 042 046 052 053 ANTRONIK 014 ARCHER 005 007 014 024 CABLE STAR 026 CENTURION 092 CENTURY 007 CITIZEN 007 COLOUR VOICE 065 090 COMBANO 080 081 COMTRONICS 019 030 DIAMOND 023 EAGLE 020 030 040 EASTERN 057 062 066 ELECTRICORD 032 GE 072 GEM...

Page 51 - SCREEN CLEANING; Maintenance

P A G E 5 1 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’salmost dry, and then use it to wipe the screen. 2. Make sure the excess water is off the s...

Page 53 - Troubleshooting

P A G E 5 3 SYMPTOM Snowy picture and unclear sound. Multiple images or ‘ghost shadows.’ Interference: Sharp lines across the screen and unclear sound. Normal picture but no sound. No picture and unclear sound. No picture or sound. No color, but the sound is okay. Picture has a big black box on it, ...

Page 54 - POSSIBLE SOLUTIONS

P A G E 5 4 Troubleshooting (Continued) SYMPTOM Remote control doesn’t work. Menu options can’t be changed or selected. No picture or sound when any non-cable source is selected. Weak or no Stereo Sound when using a stereo VCR. Time is incorrect. POSSIBLE SOLUTIONS • Make sure the batteries are fres...

Page 55 - A list of definitions for some of the words found in this guide.; Glossary

P A G E 5 5 A list of definitions for some of the words found in this guide. 7 5 O H M R F C A B L E The round cable that comes from an off-air antenna or cable serviceprovider. Each end looks like a hex shaped nut with a wire stickingthrough the middle, and it screws onto the threaded jack on the b...

Page 57 - Product Specifications

P A G E 5 7 Model 32FZ1DC-UB Horizontal Size (inches) 35.86 Height (inches) 23.66 Thickness (inches) 21.73 Weight (pounds) 132.3 Power requirement AC 120V~ 60Hz Television system American TV Standard, NTSC-M, Integrated ATSC tuner, 64 & 256 QAM Television Channel VHF: 2 - 13UHF: 14 - 69CATV: 1 -...

Page 58 - Notes

Page 60 - Please call; LG COLOR TELEVISION LIMITED WARRANTY – USA; CUSTOMER INTERACTIVE CENTER NUMBERS

P/N : 3828VA0395F Your LG Color Television will be will repaired or replaced, at LG’s option, if it proves to be defective in material or work-manship under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Dateof Purchase") of origina...