LG 3 - Manuals

BefoRe UsInG 5 6 When the installation is complete, click Finish . Note ꔈ After the installation is complete, the ezsign service for running tomcat 7.0 is registered to the system. It starts automatically upon Windows start-up. ꔈ If a firewall is enabled, to use the remote execution mode and message...

BefoRe UsInG 7 Deleting Windows to remove LG ezsign 3.0 editor from your comput- er, click Start > All Programs > LG EzSign 3.0 Editor > Remove LG EzSign 3.0. Use the uninstaller provided with ezsign to remove ezsign editor from your computer. You may not be able to remove LG ezsign 3.0 edi...

UsInG LG ezsIGn 3.0 eDItoR 8 Running LG EzSign 3.0 Editor Windows to run LG ezsign 3.0 editor on Windows, go to Start > All Programs > LG EzSign 3.0 > LG EzSign 3.0 . Mac OS to run LG ezsign 3.0 editor on Mac os, go to Finder > Application > LG EzSign 3.0.app . When you run LG ezsign ...

UsInG LG ezsIGn 3.0 eDItoR 9 Creating EzSign Content You can easily create content using default templates provided by LG ezsign 3.0 editor. For detailed information about creating EzSign content files, see the EzSign Editor Quick Guide. Make sure you read the Note below before creating a content fi...

UsInG LG ezsIGn 3.0 eDItoR 10 Loading Content You can open ezsign content from ezsign Workspace or 'My Computer. By default, the content files are saved in and opened from ezsign Workspace. In ezsign Workspace, content files can be viewed in list or thumbnail view. select a content file and press th...

UsInG LG ezsIGn 3.0 eDItoR 11 Editing Content Editing Images Click an image area to edit the selected image. When adding an image, parts of it may be cropped if the aspect ratio of the image does not fit the selected area. If necessary, you can change the cropping border of the image or delete the i...

UsInG LG ezsIGn 3.0 eDItoR 12 Editing Text Click a text area to edit the text inside the area. You can also use the text properties edit pop-up win- dow, which appears when you click a text area, to change the properties of the selected text area. When a text area is selected, the properties editing...

UsInG LG ezsIGn 3.0 eDItoR 13 Editing Slides You can add, delete or reorder the slides. You can also change the transition time (in seconds) of slides. ❷ ❶ ❸ ❶ Adds a slide . Click the Add slide button to add a slide. the newly added slide contains the content of the previous slide. ❷ Changes the tr...

UsInG LG ezsIGn 3.0 eDItoR 14 Panel Saver Content Image sticking means that a previous image or the outline of a previous image still appears on the screen even after the image has changed. When playing content, LG ezsign 3.0 editor displays the panel saver content image, the background and text col...

UsInG LG ezsIGn 3.0 eDItoR 15 Creating and Exporting Content Playlists Creating Playlists You can add content files to a playlist and set the playback order. You can select a schedule type and set the play- back duration or start time and end time of the con- tent. You can set the tV on/off time. Wh...

UsInG LG ezsIGn 3.0 eDItoR 16 Opening Playlist You can open playlists from ezsign Workspace or My Computer. By default, playlists can be saved in and open from ezsign Workspace.ezsign Workspace supports a list view of the playlists. ezsign Workspace My Computer Note ꔈ A playlist is a list of playbac...

UsInG LG ezsIGn 3.0 eDItoR 17 Sending via a Wireless Network Using a wireless network, you can send content files saved on a PC to the tV without having to connect a UsB device. to use this function, you must first connect a wireless dongle to the tV in order to connect to the wireless network. (see...

UsInG LG ezsIGn 3.0 eDItoR 18 Note ꔈ If you click the Cancel button while wireless transmission is in progress, the transmission will be canceled. ꔈ If the network status is not normal, it may take some time for the transmission to be canceled after clicking the Cancel button. In this case, please w...

UsInG LG ezsIGn 3.0 eDItoR 19 Network Setting Wireless Network Connection Connect a wireless dongle to configure the wireless network. A wireless router must be installed and operating at this time. Refer to the user manual of the wireless router to see how to install it. the network settings and co...

UsInG LG ezsIGn 3.0 eDItoR 20 Setting TV Using the tV Management function, you can send messages to the tV, adjust the volume, show/hide ezsign, set the no signal screen, etc. ❸ ❶ ❷ ❹ ❺ ❻ ❼ ❶ Adds a tV to the list by entering the IP address. ❷ Removes the selected tV from the list. ❸ Automatically s...

UsInG LG ezsIGn 3.0 eDItoR 21 TV Control ꔈ Use the mouse or enter a number to adjust the tV volume. ꔈ Use the on/off button to show or hide the ezsign content on the tV. ꔈ After selecting a control item in the left, click the [Apply to tV] button to have the setting applied to the tV. ꔈ If an error ...

UsInG LG ezsIGn 3.0 eDItoR 22 Setting No Signal Image You can set the image shown in the tV area of the ezsign content when the tV is in ‘no signal’ status. Note ꔈ If a no signal image is set, it is applied to the tV only after the playlist is exported to the tV. ꔈ We recommend setting an image with...

UsInG LG ezsIGn 3.0 eDItoR 23 Mac OS since the firewall is turned off by default on the Mac, you can start using the functions without changing any settings. If the firewall is enabled, you will not be able to use the Remote Mode or the Instant Message func- tions. In this case, you must change the ...

MAnAGInG Content 24 Managing Content * the on-screen Display (osD) in this manual is an example to help you understand how to operate the product, and may be slightly different from your projector depending on models. Saving Content on TV Memory 1 Insert the UsB device containing the ezsign tV conte...

MAnAGInG Content 25 ❺ ❸ ❹ ❷ ❶ You can select the files you want to play from the file list using the tV remote control. Press the Play button after selecting the files you want to play, and the selected files are played in order. (However, if the schedule mode is set to time, the files are played ac...

MAnAGInG Content 26 Note ꔈ You can switch to ezsign mode or tV mode or see the file information while a file is being played from a UsB device or the tV memory by pressing any button on the tV remote control. ꔈ When you turn on a tV which has been set to the factory default, content files on the tV ...

MAnAGInG Content 27 Deleting EzSign Content from the TV Memory 1 Press the MENU SETTINGS button on the tV remote control. 2 select My Media using the remote control. 3 select EzSign TV . USB EzSign TV Movie List Photo List Music List 4 select TV Memory tab. TV memory USB EzSign TV content exists. Ho...

MAnAGInG Content 28 Playing Video from Content You can play a video file while playing a content file. Play the content file first. Refer to the tV Manual for more information on how to play a video file. 1 Press the Menu SETTINGS button on the tV remote control. 2 select My Media using the remote c...

T o obTain The source code under GPL, LGPL, MPL and oTher oPen source Licenses , ThaT is conTained in This ProducT , PLease visiT hTTP :// oPensource . LGe . coM . i n addiTion To The source code , aLL referred License TerMs , warranTy discLaiMers and coPyriGhT noTices are avaiLabLe for downLoad . L...