Page 2 - ON CLEANING; Recommended Cleaning Chemicals; How to Use Cleaner (When the screen has dust); CONTENTS
2 ENGLISH ON CLEANING Recommended Cleaning Chemicals • Isopropanol 70 % • Ethanol 70 % • Cidex ® OPA • 0.9 % NaCl solution How to Use Cleaner (When the screen has dust) • Prior to cleaning, turn off the monitor and remove the power cable. • Soak a soft cloth in a recommended cleaner, then lightly ru...
Page 3 - ASSEMBLY AND PREPARING; Product Composition; CAUTION; Supported Software
3 ENGLISH ASSEMBLY AND PREPARING Product Composition Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the product.Note that the product and related components may look different fro...
Page 4 - Product and Button Description; Front View; Power LED Indicator; NOTE
4 ENGLISH Product and Button Description Front View Power LED Indicator Calibration Sensor Auto Luminance Stability Sensor APRX. Sensor Power LED Indicator LED Status Operation Description Green Normal operation Orange No signal/Power saving Light Orange Power saving when people leave LED off Power ...
Page 5 - Rear View
5 ENGLISH Rear View 2 3 4 5 6 8 7 USB IN 1 USB IN 2 USB UP USB (MSD) LAN DP IN DVI-D IN AC INPUT ON / OFF 1 1 / / - One upstream two downstream ports. - Peripheral USB device connection. 2 - USB A. - Save test or calibration report to an external storage device, it is compatible with FAT32 only. (Fo...
Page 6 - Stand View; INITIAL INSTALLATION
6 ENGLISH Stand View Unit: mm (inches) 100 (3.9) 100 (3.9) 429.3 (16.9) 18 (0.7) 247.9 (9.7) INITIAL INSTALLATION To attach the LCD monitor to your system, follow these instructions 1 Turn off the power of your computer. 2 For connecting the PC: Connect the DVI-D cables or DisplayPort cables to the ...
Page 7 - Moving and Lifting the Monitor; Installing on a Table
7 ENGLISH Moving and Lifting the Monitor When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size. • Place the monitor in the original box or packing material before attempt...
Page 8 - Adjusting the Stand Height; Adjusting the Angle; WARNING; Swivel stand; WARNING
8 ENGLISH Adjusting the Stand Height 1 Place the monitor mounted on the stand base in an upright position. 2 Handle the monitor with both hands for safety. Max. 150.0 mm (5.9 inches) WARNING • When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers....
Page 11 - USER SETTINGS; Menu Settings; OSD Control Knob
11 ENGLISH USER SETTINGS Menu Settings OSD Control Knob Your LCD monitor allows you to easily adjust the characteristics of the image being displayed. All of these adjustments are made using the OSD Control Knob on the monitor. While you use this OSD Control Knob, an OSD shows you their changes. The...
Page 16 - TROUBLESHOOTING
16 ENGLISH TROUBLESHOOTING Problem Check to see Nothing is displayed on the screen • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Check the AC switch. Should be in the On position. • OSD Control Knob and c...
Page 17 - PRODUCT SPECIFICATION
17 ENGLISH PRODUCT SPECIFICATION The product specifications are subject to change without prior notice for product improvements.“ ~ ” refers to alternating current (AC), “ ” refers to direct current (DC). LCD Screen Type TFT (Thin Film Transistor)LCD (Liquid Crystal Display) Screen Pixel Pitch 0.211...
Page 19 - Display Mode; Supported Graphic Card List
19 ENGLISH Display Mode Pixel Format Pixel Frequency Frequency Standard Input 1 Input 2 CLK (MHz) H (kHz) V (Hz) Type DVI-D DP 1280 x 1024 108 63.96 60.0 VESA V V 1600 x 1200 162 75.00 60.0 VESA V V 1920 x 1080 148.5 67.50 60.0 VESA V V 1920 x 1200 193.6 74.60 60.0 VESA V V 2048 x 1536 260 96.71 60....