LG 16221FD - Manuals

LG 16221FD – Manual in PDF format online.

Manuals:

Manual

Manual LG 16221FD

Summary

Page 3 - CONTENTS

2 CONTENTS 1. SPECIFICATION ............................................................................................................................3 2. FEATURES & TECHNICAL EXPLANATION .................................................................................4 3. PARTS IDENTIFICATION...

Page 4 - ITEM

3 1. SPECIFICATION ITEM POWER SUPPLY 220-240V~, 50Hz PRODUCT WEIGHT 65kg WASHING 230W SPIN (1400rpm) 440W DRAIN MOTOR 38W WASH HEATER 2000W WASH 45rpm 1600 rpm : 400/800/1200/1600 rpm 1500 rpm : 400/800/1200/1500 rpm 1400 rpm : 400/800/1000/1400 rpm 1200 rpm : 400/800/1000/1200 rpm 1000 rpm : 400/60...

Page 5 - LG

4 Jumbo drum LG ’s jumbo drum can wash about 40% more load than conventional washing machine. A bigger drum improves the wash performance. More economical by Intelligent Wash System Intelligent Wash System detects the amount of load and water temperature, and then determines the optimum water level ...

Page 6 - -2.DETERMINE WASHING TIME BY FUZZY LOGIC; FUZZY; selected; water

5 2-2.DETERMINE WASHING TIME BY FUZZY LOGIC To get the best washing performance optimal time is determined by sensing of water temperature, selected washing temperature and laundry amount. 2-3.WATER LEVEL CONTROL This model adopts a pressure sensor which can sense the water level in the tub. Water s...

Page 7 - PARTS IDENTIFICATION; Inlet hose; If the supply cord is damaged,; ACCESSORIES

6 3. PARTS IDENTIFICATION Inlet hose Wrench Power plug Control panel Door Lower cover Adjustable feet (For detergent and fabric softener) Drawer Drum Lower cover cap Drain plug If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or a similarly qualified perso...

Page 10 - TEST OPERATION; Wash

9 TEST OPERATION Pre Pre - wash wash Time Sav e ime Save Crease Care Crease Care Rinse Rinse + 1200 1200 800 800 Pre Pre - wash wash Time Sav e ime Save Crease Care Crease Care Rinse Rinse + 1200 1200 800 800 Pre Pre - wash wash Time Sav e ime Save Crease Care Crease Care Rinse Rinse + 1200 1200 800...

Page 11 - LED display; See troubleshooting guide.; Water temperature selector; Pre Wash; If you want to prevent crease, select this button with spin; Option1

10 5. OPERATION Pre Wash Time Save Crease Care Rinse + 1200 800 LED display Display the estimated remaining time (Hour : Minute) to finish. In case of abnormal operation, errorindications are displayed. ( ) See troubleshooting guide. Water temperature selector Press the button to select watertempera...

Page 12 - Power button; Child Lock; Child Lock; Time Delay; Time Save; Option2

11 Pre Wash Pre Wash Time Save Crease Care Rinse + 1200 800 Power button Press the button to turn power onand off.Press the button to cancel thedelay finish. Child - Lock Child Lock system can be set and canceled by pressing and holding both [Option1] and [Option 2] buttonsimultaneously more than 2 ...

Page 13 - PROGRAM CHART

* Water Supply : W ·S * Intermittent Spin : I·S * Disentangle : D ·T * Basic Cycle* Optional Cycle * Pre-Setting Time : Water Supply - 120 sec. * Basic time is minute in washing chart Drain - 60 sec. * The actual program time can be varied with the load amount , * ~ Time for varies as the temperatur...

Page 14 - -3.HOW TO KNOW THE WATER LEVEL FREQUENCY; Rinse

13 7. TROUBLESHOOTING 7-1.BEFORE PERFORMING SERVICE Be careful of electric shock or disconnecting the parts while troubleshooting. Voltage of each terminal in 220-240V~ and DC while applying an electric current. 7-2.QC TEST MODE. Pressing Option1 , and Spin button simultaneously. Power supply on wit...

Page 15 - the machine will change into pause status.

14 ERROR SYMPTOM CAUSE 1 WATER INLET Water has not reached to the pre-set level within 8 min. since ERROR inlet valve operated, or water has not reached to the normal level within 25 min. Load is too small. 2 IMBALANCE The appliance is tilted. ERROR Laundry is gathered to one side. Non-distributable...

Page 17 - -1.DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION; ERROR DIAGNOSIS AND CHECK LIST; YES

16 SYMPTOM GUIDE FOR SERVICE CALL NO POWER WATER INLET TROUBLE 8-1.DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION 8. ERROR DIAGNOSIS AND CHECK LIST YES YES YES NO NO YES NO NO Is the power plug connected firmly to 220-240V~ outlet? Power failure? or Breaker opened? Is the outlet controlled by a switch ...

Page 18 - Check if the door switch is O.K

17 SYMPTOM GUIDE FOR SERVICE CALL DOOR OPEN ERROR DRAIN TROUBLE NO YES YES NO NO YES Did you press the Start/Pause button when the door is open? Visit to check Check if the door switch is O.K Is displayed? Is the debris filter clogged with foreign material such as pins, coins, etc? Is the drain hose...

Page 19 - Clean the compartment for softener

18 SYMPTOM GUIDE FOR SERVICE CALL Suds overflow from the appliance. (In this condition, wash and spin do not operate normally) No effect of softener YES YES YES YES YES Is low-sudsing detergent for the drum washing machine used? Is the proper amount of detergent used as recommended? Recommend to red...

Page 20 - Check the fuse; NO POWER; CAUTION

19 8-2.FAULT DIAGNOSIS AND TROUBLESHOOTING 1. Be careful of electric shock or disconnecting the parts while troubleshooting. 2. First of all, check the connection of each part terminal with wiring diagram. 3. If you replace the MAIN PWB ASSEMBLY, put in the connectors correctly. NO NO YES YES MAIN P...

Page 21 - MAIN WASH; NO WATER SUPPLY

20 NO YES NO NO YES NO YES YES NO NO YES YES YES NO NO NO YES Wiring diagram Option (Hot) Option (Hot) MAX max Is water supply shut-off? Is the tap opened? When you press both Rinse button and Spin buttonsimultaneously, is the water level frequency below240? Is the inlet valve filter clogged with im...

Page 22 - ABNORMAL SOUND

21 YES YES NO NO NO NO YES YES YES YES Wiring diagram Option (Hot) MAX max ABNORMAL SOUND SOFTENER DOES NOT FLOW IN Fix the bolt tightly. Replace the STATORASSEMBLY or ROTORASSEMBLY. Refer to NO WATER SUPPLY Check the wiring on the dispenser. Put it in the correctcompartment. Clean the cap anddrawer...

Page 23 - HEATING WITHOUT WATER

22 220-240V NO YES YES YES YES NO NO NO NO YES YES NO MAIN PWB ASSEMBLY MAIN PWB ASSEMBLY 2 1 Replace the S.PRESSURE SWITCH ASSEMBLY Replace the MAIN PWBASSEMBLY Repair the DRAIN HOSE ASSEMBLY. Remove foreign material. Reconnect or repair the connector Repair the DRAIN PUMP ASSEMBLY. Repair the MAIN...

Page 24 - WILL NOT CIRCULATE WATER; Is the impeller of the drain pump clogged?

23 YES YES YES YES YES NO NO NO NO NO Hose Connector (Gray) Connector Connector Hose 2 1 WILL NOT CIRCULATE WATER Is the impeller of the drain pump clogged? Are the Hose Connector and/or Hose clogged? Is the connector disconnected, disassembled? Is the coil of the right side of drain pump openor sho...

Page 25 - WASH HEATER TROUBLE; Normal; When checking THERMISTOR on the tub is the; HEATING CONTINUOUSLY ABOVE

24 NO YES YES WASH HEATER TROUBLE When checking the voltage betweenconnectors ( , ) during whites washing, Is the voltage220 - 240V ? Replace the MAIN PWBASSEMBLY YES NO After power off and the heater terminal isdisconnected, is the resistance 10~30 ? Replace theHEATER ASSEMBLY NO After power off,is...

Page 26 - SPIN TROUBLE

25 NO YES YES YES NO NO YES NO NO YES (1) 2 3 4 1 SPIN TROUBLE Check the sensor (Pressure) orhose (Sensor). If the problemis on the sensor or the hose,replace the sensor or the hose. Normal Correct the connector. Correct the connector. Replace the STATORASSEMBLY(4417FA1994E) Check on the spinning, i...

Page 27 - DISASSEMBLY INSTRUCTIONS; Hook; TOP PLATE ASSEMBLY

26 Be sure to unplug the machine out of the outlet before disassembling and repairing the parts. 9. DISASSEMBLY INSTRUCTIONS Unscrew 2 screws on the back of the top plate. Pull the top plate backward and upward as shown. Disconnect the ASSEMBLY connector. Pull out the drawer and unscrew 2 screws. Pu...

Page 28 - Option; DRAWER

27 Disassemble the TOP PLATE ASSEMBLY. Pull out the drawer slightly upward. Unscrew 2 screws. Disassemble hose clamps and hoses. Disassemble the ventilation bellows and the water inlet bellows from the tub. Option PUSH DISPENSER ASSEMBLY DISPENSER ASSEMBLY DRAWER

Page 29 - INLET VALVE ASSEMBLY

28 Disconnect the wiring connector.Unscrew 2 screws from the back. When reconnecting the connector Cold only model Cold and Hot model Open the lower cover CAP by using coin and pull out the lower cover in the arrow direction after a screw isunscrewed. 1 2 3 Option INLET VALVE ASSEMBLY LOWER COVER VA...

Page 31 - Rotor; ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER ASSEMBLY; Clean the drain pump filter

30 Remove the BACK COVER. Unscrew the bolt to pull out the ROTOR ASSEMBLY. Disconnect the wiring connector. Unscrew 6 bolts from the STATOR. Remove the BODY FRAME. (Only 1400 rpm models) Note : Hook of connector (1) is on the backside Pull out the HINGE, pressing its snap.Do not use the pulled out H...

Page 33 - Take apart the CLAMP ASSEMBLY (cabinet) and

32 SWITCH ASSEMBLY, DOOR LOCK WHEN FOREIGN MATERIAL IS STUCK BETWEEN DRUM AND TUB Take apart the CLAMP ASSEMBLY (cabinet) and release the GASKET. Unscrew 2 screws holding the DOOR SWITCH ASSEMBLY. Disconnect the door lock from the wiring connector. Remove the HEATER ASSEMBLY. Remove the foreign mate...

Page 34 - EXPLODED VIEW AND PART LIST

33 10-1.THE PART LIST OF CABINET ASSEMBLY 10. EXPLODED VIEW AND PART LIST A103 A102A104 A101 A100 A430 A485 A410 A140 A200 A201 A220 A303 A133 A275 A276 A440 A130 A131 A141 A150 A310 A300 A110 A152 A153 A151 HOT (RED) COLD (BLUE)

Page 36 - 0-3 THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY

35 10-3 THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY K121 K125 K122 F140 K411 K420 K110 K141 K111 K140 K510 K531 K520 F441 K540 K550 K343 K131 K530 K115 K130 K410 K105 K310 K320 K123 K143 K350 K351 K360 K340 K344 K346