LevelOne WBR-6001 - Manuals

3. Hardware Installation Product Layout – Front View 1) Reset Press the Reset button to reboot device or restores factory default setting. 2) Status A blinking light indicates the device is ready 3) WAN A solid light indicates the WAN port is connected. 4) WLAN A solid light indicates the Wireless s...

Product Layout – Rear View 1) Power Jack Receptor for the supplied power adapter 2) LAN Ports (1~4) Connect Ethernet devices such as computers, switches or hubs. 3) WAN Port The WAN port is the connection for the Ethernet cable to the Cable or DSL Modem. 4) Antenna Detachable antenna allows users to...

3. Setup WAN connection Prepare an Ethernet cable for connecting this product to your cable/xDSL modem or Ethernet backbone. 4. Power on Connecting the power cord to power inlet and turning the power switch on, this product will automatically enter the self-test phase. When it is in the self-test ph...

Network Check 1. Please make sure your PC can get IP address automatically so the WBR-6001 can communicate with your PC during configuration. • Select “Control Panel” > “Network Connections”. • Right click the “Local Area Connection” and choose “Properties”. • Select the TCP/IP protocol for your ...

4. Configuring Wireless Router LED Indicator for N_Max Wireless Router LED Function Color Statu s Description Status flashed once per second to indicate system is alive. Status System status Green Blinking WAN WAN port activity Green On The WAN port is linked. Blinking The WAN port is sending or rec...

Login to Configure from Wizard Activate your browser, and disable the proxy or add the IP address of this product into the exceptions. Then, type this product’s IP address in the Location (for Netscape) or Address (for IE) field and press ENTER. For example: http://192.168.0.1 After the connection i...

Setup Wizard will guide you through a basic configuration procedure step by step. Press ”Next ” Once the user finishes those steps and the router screen displayed as below. It means that the Internet connection is now established. 8

Basic Setting Please Select “Advanced Setup” to Setup Primary Setup – WAN Type, Virtual Computers 10

This option is primary to enable this product to work properly. The setting items and the web appearance depend on the WAN type. Choose correct WAN type before you start. 1. LAN IP Address: the local IP address of this device. The computers on your network must use the LAN IP address of your product...

Dynamic IP Address 1. Host Name: optional. Required by some ISPs, for example: @Home. 2. Renew IP Forever: this feature enables this product to renew your IP address automatically when the lease time is expiring-- even when the system is idle. Dynamic IP Address with Road Runner Session Management.(...

Virtual Computers (Only for Static and dynamic IP address Wan type) Virtual Computer enables you to use the original NAT feature, and allows you to setup the one-to-one mapping of multiple global IP address and local IP address. • Global IP: Enter the global IP address assigned by your ISP. • Local ...

DHCP Server Press “ More>> ” 1. DHCP Server: Choose “Disable” or “Enable.” 2. Lease time: This is the length of time that the client may use the IP address it has been assigned by DHCP server. 3. IP pool starting Address/ IP pool starting Address: Whenever there is a request, the DHCP server w...

Wireless setting, 802.1X setting and WDS Wireless settings allow you to set the wireless configuration items. Wireless: The user can enable or disable wireless function. Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam freely over this product a...

Virtual Server This product’s NAT firewall filters out unrecognized packets to protect your Intranet, so all hosts behind this product are invisible to the outside world. If you wish, you can make some of them accessible by enabling the Virtual Server Mapping. A virtual server is defined as a Servic...

Miscellaneous Items IP Address of DMZ Host DMZ (Demilitarized Zone) Host is a host without the protection of firewall. It allows a computer to be exposed to unrestricted 2-way communication for Internet games, Video conferencing, Internet telephony and other special applications. NOTE: This feature ...

The device also supports this function. If the OS supports this function enable it. Security Settings 30

(149.161.123.100 and 149.161.123.119) They can do everything except read net news (port 119) and transfer files via FTP (port 21) Others are allowed After Outbound Packet Filter setting is configured, click the save button.

Domain Filter Domain Filter Let you prevent users under this device from accessing specific URLs. Domain Filter Enable Check if you want to enable Domain Filter. Log DNS Query Check if you want to log the action when someone accesses the specific URLs. Privilege IP Addresses Range Setting a group of...

URL Blocking URL Blocking will block LAN computers to connect to pre-define Websites. The major difference between “Domain filter” and “URL Blocking” is Domain filter require user to input suffix (like .com or .org, etc), while URL Blocking require user to input a keyword only. In other words, Domai...

MAC Address Control MAC Address Control allows you to assign different access right for different users and to assign a specific IP address to a certain MAC address. MAC Address Control Check “Enable” to enable the “MAC Address Control”. All of the settings in this page will take effect only when “E...

"Control table" is the table at the bottom of the "MAC Address Control" page. Each row of this table indicates the MAC address and the expected IP address mapping of a client. There are four columns in this table: MAC Address MAC address indicates a specific client. Expected IP addre...

6. Clients 1 and 2 are allowed to associate to the wireless LAN, but a wireless client with a MAC address not specified in the Control table is denied to associate to the wireless LAN. Client 3 is a wired client and so is not affected by Association control. Miscellaneous Items Remote Administrator ...

Administrator Time-out The time elapses of no activity to logout automatically. Set it to zero to disable this feature. Discard PING from WAN side When this feature is enabled, any host on the WAN cannot ping this product. SPI Mode When this feature is enabled, the router will record the packet info...

System Time Get Date and Time by NTP Protocol Select it if you want to Get Date and Time by NTP Protocol. Time Server Select a NTP time server to consult UTC time Time Zone Select a time zone where this device locates. Set Date and Time manually Select it if you want to Set Date and Time manually.

Set Date and Time manually Select it if you want to Set Date and Time manually. Function of Buttons Sync Now: Synchronize system time with network time server Daylight Saving: Set up where the location is. System Log This page support two methods to export system logs to specific destination by mean...

Input the SMTP server IP and port, which are concated with ':'. If you do not specify port number, the default value is 25. For example, "mail.your_url.com" or "192.168.1.100:26". Send E-mail alert to Send e-mail alert to the recipient who will receive these logs. You can assign more...

SNMP Setting In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give a user the capability to remotely manage a computer network by polling and setting terminal values and monitoring network events. Enable SNMP You must check either local or remote or both to enable SN...

Routing Routing Tables allow you to determine which physical interface address to use for outgoing IP data grams. If you have more than one routers and subnets, you will need to enable routing table to allow packets to find proper routing path and allow different subnets to communicate with each oth...

Configuration on NAT Router Destination SubnetMask Gateway Hop Enabled 192.168.1.0 255.255.255.0 192.168.123.216 1 ˇ 192.168.0.0 255.255.255.0 192.168.123.103 1 ˇ So if, for example, the client3 wanted to send an IP data gram to 192.168.0.2, it would use the above table to determine that it had to g...

Schedule Rule You can set the schedule time to decide which service will be turned on or off. Select the “enable” item. Press “Add New Rule” You can write a rule name and set which day and what time to schedule from “Start Time” to “End Time”. The following example configure “ftp time” as everyday 1...

Schedule Enable Selected if you want to Enable the Scheduler press “ Edit” To edit the schedule rule, press “ Delete” To delete the schedule rule and the rule #of the rules behind the deleted one will decrease one automatically. Schedule Rule can be applied to Virtual server and Packet Filter.

Qos Rule Local IP: Please input Client IP, Example: 192.168.12.33. Remote Priority: Please input Global IP and port, Example: 168.96.2.3 and port 21 54

Toolbox System Log Firmware Upgrade You can upgrade firmware by clicking Firmware Upgrade button. Backup Setting You can backup your settings by clicking the Backup Setting button and save it as a bin file. Once you want to restore these settings, please click Firmware Upgrade button and use the bin...

saved. Reset to default You can also reset this product to factory default by clicking the Reset to default button. Reboot You can also reboot this product by clicking the Reboot button. Miscellaneous Items MAC Address for Wake-on-LAN Wake-on-LAN is a technology that enables you to power up a networ...

Appendix A 802.1x Setting Figure 1: Testing Environment (Use Windows 2000 Radius Server) Equipment Details PC1: Microsoft Windows XP Professional without Service Pack 1 and LevelOne Wireless PCI Card PC2: Microsoft Windows XP Professional with Service Pack 1a or latter and LevelOne Wireless PCI Card...

The following test will use the inbuilt 802.1X authentication method such as ,EAP_TLS, PEAP_CHAPv2(Windows XP with SP1 only), and PEAP_TLS(Windows XP with SP1 only) using the Smart Card or other Certificate of the Windows XP Professional. DUT and Windows 2000 Radius Server Setup Setup Windows 2000 R...

Figure 2: Enable IEEE 802.1X access control / Smart card or certificate properties Windows 2000 RADIUS server Authentication testing: DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.) 1. Download and install the certificate on PC1. (Fig 4) 2. PC1 chooses the SSID of DUT...

Appendix B WPA-PSK and WPA Wireless Router: LAN IP: 192.168.123.254 WAN IP: 192.168.122.216 Radius Server: 192.168.122.1 User A: XP Wireless Card:Ti-11g Tool: Odyssey Client Manager Refer to: www.funk.com Download: http://www.funk.com/News&Events/ody_c_wpa_preview_pn.asp Or Another Configuration...

4. Back to Connection: Then Select “Connect to network” You will see: Method2: 1. First, patch windows XP and have to install “Service package 1” Patch: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=5039ef4a- 61e0-4c44-94f0-c25c9de0ace9 64

7. Go “Network” and Select “1” and ok 8. Back to Connection and Select “123kk. If successfully , the wireless client has to authenticate with Radius Server, like below:

9.Result: Method 2: 1. The UserA or UserB have to get certificate from Radius, first. http://192.168.122.1/certsrv Account: fae1 Password: fae1 2. Then Install this certificate and finish. 3. Setting on the router and client: Router: 70

Appendix C FAQ and Troubleshooting What can I do when I have some trouble at the first time? 1. Why can I not configure the router even if the cable is plugged in the ports of Router and the led is also light? A: First, make sure that which port is plugged. If the cable is in the Wan port, please ch...

5. When I use Static IP Address to roam Internet, I can access or ping global IP 202.93.91.218, But I can not access the site that inputs domain name, for example http://espn.com ? A: Please check the DNS configuration of Static IP Address. Please refer to the information of ISP and assign one or tw...

If SSID is default and click “Properties” to check if the driver of wireless client supports AES encryption. 3. When I use wireless to connect the router, but I find the signal is very low even if I am close to the router? A: Please check if the wireless client is normal, first. If yes, please send ...

78 Technical Specifications General Model WBR-6001 N_Max Wireless Broadband Router Data Transfer Rate 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps Max physical rate up to 300 Mbps in 802.11n mode Transmit Power 802.11b: 17±2dBm 802.11g: 15±2dBm 802.11n: 14±2dBm Frequency Range America/ FCC: 2.412...