Lennox CI2000HT - Manuals - manualsarea.com

Page 2 - READ THIS MANUAL IN ITS ENTIRETY AND UNDER-; WARNING; Page 10 of this manual.

2 IMPORTANT SAFETY AND WARNIING INFORMATION READ THIS MANUAL IN ITS ENTIRETY AND UNDER- STAND THESE RULES TO FOLLOW FOR SAFETY. WARNING Do not attempt to alter or modify the construction of the appliance or its components. Any modification or alteration may void the warranty, certification and listi...

Page 3 - Questions To Ask Local Building Official; Note – This appliance is NOT approved for installation into a Manu-

3 PACKAGING LIST USING THIS MANUAL Please read and carefully follow all of the instructions found in this manual. Please pay special attention to the safety instructions provided in this manual. The homeowner’s care and operation Instructions included here will assure you have many years of dependab...

Page 4 - For Floor Protection Material Requirements:; Draft Requirements; Floor Protection - Model CI1000HT; Floor Protection / Hearth Extension Using; Top View; Figure 1 - Floor Protection Requirements, Model CI1000HT; Minimum; Floor; SELECTING A LOCATION

For Floor Protection Material Requirements: In USA see Page 5 In Canada see Page 6 4 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE The design of your home and where you place your stove will determine its value as a source of heat. This type of appliance depends primarily on air circulation (c...

Page 5 - Floor Protection / Hearth Extension Using Alternate Material As; Also see Floor Protection above .

5 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE 5 Floor Protection / Hearth Extension Using Alternate Material As Floor Protector - Model CI1000HT (USA only) Note: Also see Floor Protection above . The hearth pad or alternate material used as a floor/hearth protector must be constructed of a d...

Page 7 - Floor Protection / Hearth Extension; Figure 2

7 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE Note: For Floor Protection Material Requirements in USA and Canada see Floor Protection Using Alternate Material As Floor Protector on this page. Floor Protection - Model CI2000HT (USA and Canada) The floor protector must meet or exceed the minim...

Page 8 - Table 3; COMBUSTIBLE WALL CLEARANCE – USA & Canada; This is a reference dimension only; CLEARANCES - MODEL CI1000HT

8 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE Listed Material k (per inch) r (per inch) Listed Min. Thickness Listed Material .84 K L 1.19 r L 1/2 " (.5") T L ** Approved Alternate Materials for Floor/Hearth Protection Alternative Materials Thermal Values Minimum Thickness (rounded t...

Page 9 - Figure 3 - Parallel Installation; Combustible

9 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE Combustible Combustible A D E B Figure 3 - Parallel Installation Figure 4 - Corner Installation C F B G Combustible Combustible MODEL CI1000HT IS NOT APPROVED FOR USE WITH DOUBLE WALL PIPE. DO NOT INSTALL THE CI1000HT INTO AN ALCOVE OR A CONFINED...

Page 10 - Figure 5 - Types of Chimney; Types of Chimneys; to the roof on all sides with roofing compound.; Acceptable Connector Pipe For Installations

10 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE Figure 5 - Types of Chimney Types of Chimneys The unit must be connected to either a code-approved masonry chimney with a flue liner, or a 6 inch diameter factory-built chimney complying with the requirements for Type HT chimneys in the standard...

Page 11 - (610 mm) above the unit. Excessive draft will lead to poor control of; Figure 6 - The 10’ by 2’ Rule for Vent Termination; Less than; CAUTION; Draft Test Procedure

11 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE Chimney Height Requirements The chimney must extend 3 feet above the level of roof penetration and a minimum of 2 feet higher than any roof surface within 10 feet (see below). Check with your local building officials for any additional requireme...

Page 12 - Ventilation Requirements / Provide Adequate Air For Combustion; Single Wall Pipe; Using 6” Diameter Single Wall Connector Pipe; Figure 7 - Single Wall Pipe

12 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE 3) Drill a hole in the vent pipe per the draft gauge manufacturers instruc- tions (to create a draft test port). Note: Hole location should be a minimum of 1 foot above flue outlet collar. 4) Start a fire (See How To Start And Maintain A Fire on...

Page 13 - Combustible Wall Chimney Connector Pass-Throughs; Double Wall Pipe; Using 6” Diameter Type L-Vent Connector Pipe; Figure 8 - Double Wall Pipe

13 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE Combustible Wall Chimney Connector Pass-Throughs Refer to Figure 9 Method A. 12” (305 mm) Clearance to Combustible Wall Member: Using a minimum thickness 3.5” (89 mm) brick and a 5/8” (16 mm) minimum wall thickness clay liner, construct a wall p...

Page 14 - Figure 10 - Air Control / Ash Pan Removal Tool; Primary Air Draft Control; Primary Air Draft Control; Higher Burn / Slide Right; Figure 11 - Primary Air Draft Control; CARE AND OPERATION

14 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE D C B A Min. 12 in. (304.8mm) to Combustibles Masonry Chimney Fire Clay Liner Chimney Connector Min. Clearance 12 in. (304.8mm) of Brick Minimum Chimney Clearance to Brick & Combustibles – 2 in. (51mm) Chimney Flue Factory Built Chimney Leng...

Page 15 - Adjusting Burn Rate:; Before Initial Lighting; IMPORTANT; The Start-Up Air Control provides supplemental; primary air. Do NOT leave the start-up air contol; How To Start And Maintain A Fire; Tip –; When Refueling

15 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE Adjusting Burn Rate: The primary air draft control located above the front door can be adjusted to the right for higher temperatures and to the left for lower temperatures. Generally, you will want to set the draft control somewhere in the low o...

Page 16 - Dirty Glass; When opening the doors, do not extend them beyond; Never leave stove unattended on high settings.

16 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE Primary Air Control Secondary Air Tubes (2) Permanent Secondary Combustion Air Intake. Secondary air is delivered through this opening to ignite secondary gases. There is no adjustment control for this intake. Permanent Primary Air Intake. Suppl...

Page 17 - Small Area Paint Touch-Up; First Fire; There is often an unpleasant odor and non-toxic fumes during the; Refueling; Overnight Burning; With a good drafting chimney, the primary air control will need to; FUEL; Burn Recommended Fuel

17 Burn-In Period Your stove finish is a high temperature paint that requires time and temperature to completely cure. We recommend that you ventilate the house during the initial burns. The paint emits non-toxic odors during this process.KEEP YOUR HOUSE WELL VENTILATED DURING THE CURING PROCESS TO ...

Page 18 - What is the best wood for the fire?; How To; Seasoning Guide

18 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE What is the best wood for the fire? Some woods are easier to light than others (i.e. hornbeam, beech, & oak do not light easily whereas aspen, birch and lime light easily but they do not last as long). Then come the softwoods and conifers. R...

Page 19 - MAINTENANCE; Ash; Replacement Parts; Overfiring Damage

19 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE MAINTENANCE WARNING Do NOT clean the stove while it is hot! IMPORTANT Inspect the entire stove frequently for proper operation, fit and soundness of parts. If any mal- functioning, cracked, broken, or loose parts or other problems are noted, con...

Page 20 - Creosote Formation And Need For Removal; What is Creosote - When wood is burned slowly, it produces tar and; Removing Baffle Brick for Cleaning); Removing Baffle for Cleaning; Suggestion: Wear a pair of leather work gloves when removing; Reinstall Baffle Brick; ing Baffle for Cleaning; Figure 15 - Replacing Glass

20 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE 3. Clean the area where the glass with gasket will be installed. 4. Install new glass with gasket (use only factory 4-mm glass with glass channel gasket. Do not substitute). 5. Carefully reinstall glass clips with gasket and screws. Be very care...

Page 21 - TROUBLESHOOTING; can negatively affect the draft resulting in backpuffing.

21 TROUBLESHOOTING * When Fuel Door Is Opened, Smoke Enters Room 1. The primary air draft control is closed. 2. The chimney is too cool. Set the primary air draft control on “HIGH” for a few minutes before opening either fuel loading door. 3. Excess creosote will not only restrict your draft but it ...

Page 22 - FRONT VIEW; * Shown with optional window trim

22 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE SPECIFICATIONS - Model CI1000HT Flue position Top Flue collar size 6” (152 mm) Approx. burn time 6 to 8 hours Maximum burn rate 87,301 BTU EPA BTU Range 11,500 – 55,000 BTU Emissions Rate (grams/hr) 4.42 grams Maximum Log length 18” (457 mm) Fir...

Page 24 - The item numbers correspond to component diagrams on

24 Item Cat. No. Description Where Used 31 40M5701 Air Column Set, Left & Right (Includes Gaskets & Screws) CI1000HT 32 40M6901 Air Column Set, Left & Right (Includes Gaskets & Screws) CI2000HT 33 40M2301 Air Deflector (Air Wash), Upper (Includes Hardware) CI1000HT 34 40M9801 Air Def...

Page 25 - Grate Support Bar, Fuel

25 Item Cat. No. Description Where Used 40M4501 Gasket Kit, 6 mm x 156 cm (14979) For Air Intake Slide & Glass & 4 ea. 6mm Glass Clip Gaskets (31856) CI1000HT & CI2000HT 40M0201 Gasket Kit, Ashpan Door Rope (8 mm Dia. X 97 cm) CI1000HT 40M4201 Gasket Kit, Rope (10 mm Dia. x 146cm) Ashpan...

Page 26 - REPLACEMENT PARTS; ) Lower Rear Firebrick

26 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE REPLACEMENT PARTS - Models: CI1000HT & CI2000HT PAGE 29 (1) Front Firebox Door (CI1000HT & CI2000HT Series) (2) Side Loading Door (CI1000HT Series) (2) Side Loading Door (CI2000HT Series) ( i 3) Ashpan Door (CI1000HT Series) (4) Ashpan D...

Page 29 - Door Handle Receivers; Side View

29 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE REPLACEMENT PARTS - Models: CI1000HT & CI2000HT PAGE 32 (32) Left Air Column Assembly (CI2000HT Series) (32) Right Air Column Assembly (CI2000HT Series) (33) Upper Air Deflector (CI1000HT Series) (34) Upper Air Deflector (CI2000HT Series) (3...

Page 30 - Side Retainers Not Shown; CI1000HT Firebrick Placement Diagram

30 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE REPLACEMENT PARTS - Models: CI1000HT & CI2000HT NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE REPLACEMENT PARTS - Models: CI1000HT & CI2000HT PAGE 33 (43) Secondary Air Tube Assembly (CI1000HT Series) (44) Secondary Air Tube Assemb...

Page 31 - Model; Window Trim Kit, Charcoal

31 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE OPTIONAL ACCESSORIES - Models CI1000HT & CI2000HT Catalog No. Model Description Stove Model 41M2401 WTK-CI10 Window Trim Kit, Charcoal CI1000HT 41M2001 WTK-CI20 Window Trim Kit, Charcoal CI2000HT

Page 32 - SAFETY/LISTING LABEL – Model CI1000HT; LL

32 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE SAFETY/LISTING LABEL – Model CI1000HT Chimney & Dimensions Installation Clearance Connector A B C D E** F** U.S. Residential Standard Note: 1 27.50 27.00 27.00 24.00 18.00 19.00 (in inches) Residential Reduced Note: 1, 2 21.50 27.00 19.00 18...

Page 33 - SAFETY/LISTING LABEL – Model CI2000HT; FLOOR PROTECT OR

33 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE SAFETY/LISTING LABEL – Model CI2000HT Chimney & Dimensions Installation Clearance Connector A B C D E** F** G H U.S. Residential Standard Note: 1 18.00 32.00 27.00 13.00 20.00 16.00 29.00 60.00 (in inches) Residential Reduced Note: 2 14.50 2...

Page 34 - EPA LABELS

34 EPA LABELS – CI1000HT and CI2000HT PAGE 38 EPA LABELS – CI1000HT and CI2000HT

Page 35 - Service Service

35 OWNERSHIP RECORDS Dealer’s Name: Dealer’s Address: City: State: Serial Number: Date Installed: Date of Purchase: Notes: SERVICE AND MAINTENANCE LOG Service Service Service Date Technician Description Zip Code:

Page 36 - WARRANTY; supplied from the manufacturer.; The installation date of the appliance.

36 Printed in U.S.A. © Lennox Hearth Products 2002 P/N 775,080M Rev. G 09/2007 Lennox reserves the right to make changes at any time, without notice, in design, materi- als, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code ...