Lanzar SX7 - Manuals - manualsarea.com

Page 3 - owner’s manual; troubleshooting; electronic crossover; Level of sound is low.; precautions; Enjoy your system, but use it wisely and safely!

owner’s manual troubleshooting electronic crossover If you experience.... Check that: Level of sound is low. • Wiring is not loose or cables misconnected/disconnected • RCA cables are not faulty Background noise istoo high. • Wiring is not loose or cables misconnected/disconnected • RCA cables are n...

Page 4 - system diagram; -Way system application using the SX7

system diagram 3-Way system application using the SX7 Head unit (Stereo, CD Player, Tape Deck, etc.) Lanzar Vibe SX7 Electronic Crossover Left and RightLine Inputs Rear Panel Left and RightLine Outputsfrom Head Unit 8 electronic crossover SX7 MID CHANNELPower Amplifier LOW CHANNEL Power Amplifier to...

Page 5 - contents

owner’s manual contents 1 Congratulations Features Specifications Controls and Displays Operation Installation Wiring Directions System Diagram Troubleshooting and Precautions 2 2 3 4 5 6 7 8 9 Limited Warranty 10 electronic crossover SX7

Page 6 - features

features • 6 Channel Outputs (Sub, Mid, High) • Infinitely Adjustable Crossover Points • Sub, Mid and High Gain Controls • 2 Channel RCA Input Jacks • Subwoofer Phase Shift Adjustment • LED Power On Indicator • 12dB per Octave Slope • Fully Isolated DC-t0-DC Power Supply • Remote Power On/Off • Half...

Page 7 - wiring; Electronic connections; Points

owner’s manual wiring Connect 12V DC from a constant battery source to a +12V slip-on spade terminaland install a one (1)amp fuse in line. Connect the SX7’s GROUND to a good chassis ground, near where the unitis mounted, or to the case of the head unit. Connect the SX7’s REMOTE TURN-ON lead to the r...

Page 8 - installation; Installing your SX7 under the dash of your car; This Half-DIN size unit can also be installed in the

installation Please take the time to install your newLanzar Signal Processor securely, accordingto this diagram, using the hardware provided. Signal Processor enclosure Mounting Bracket 4 x 12 mmself-tapping screw (2) 4 mm springwasher (2) 4 mm plainwasher (2) 4x 6 mm machine screw (4) Dashboard Ins...

Page 9 - specifications

owner’s manual specifications Subwoofer Crossover RangeMidrange Crossover RangeHigh Pass Crossover Range 32 Hz to 400 Hz32 Hz to 400 Hz640 Hz to 8 KHz Frequency Response 20 Hz – 30 kHz Dimensions, W x D x H (mm) 7.0 x 6.25 x 1 (190 x 115 x 29 mm) Power Supply Voltage 10 – 16 V Neg. Ground Current Dr...

Page 10 - controls; Front panel

+12 Rem Gnd INPUT L R HIGH L R MID L R OUTPUT LOW L R controls Front panel Rear panel 4 Input Connectors SX7 SUBWOOFER power phase MIDRANGE HIGH RANGE max min Gain freq 640 8K . . . . . . . . . Power Switch 1 Subwoofer Frequencyand Gain Controls 3 Power Indicator LED 2 Subwoofer Output Phase Switch ...

Page 11 - operation; Function; Used to turn power on and off to the SX7.

owner’s manual operation Control/Connector Function This LED is illuminated when the unit isproperly powered, grounded and the remotepower has been turned on. The frequency control adjusts the range ofthe signal delivered to the Sub channel. Thegain control adjusts the level of that signal. 5 ax ns ...

Page 12 - Limited Warranty Policy; warranty

CAR AUDIO QualityTechnologyPerformance QualityTechnologyPerformance All Lanzar Signal Processors are carefully constructed and thoroughlytested before shipment. Units purchased in the USA are warrantedto be free of defects in material and workmanship for three (3)yearsfrom the date of purchase. This...