Lanzar SDBT75NU - Manuals

Lanzar SDBT75NU – Manual in PDF format online.

Manuals:

Manual

Manual Lanzar SDBT75NU

Summary

Page 2 - USE THIS PRODUCT SAFELY; • The monitor is operated automatically.

2 Compatible with PAL DVD (Video CD)and NTSC DVD (Video CD) This player can play discs recorded ineither PAL or NTSC format. • A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder, video D/A converter, and audio decoders. • L/R stereo analog audio outputs...

Page 3 - CONTENTS

3 CONTENTS Features .........................................................................................................2 Use This Product Safely ...............................................................................2 Safety Information ....................................................

Page 4 - SAFETY INFORMATION; Region Management Information

4 CAUTION: MOBILE DVD PLAYER IS A CLASS ILASER PRODUCT. HOWEVER THISMOBILE DVD PLAYER USES AVISIBLE/INVISIBLE LASER BEAMWHICH COULD CAUSE HAZARDOUSRADIATION EXPOSURE IF DIRECTED.BE SURE TO OPERATE THE MOBILEDVD PLAYER CORRECTLY ASINSTRUCTED.USE OF CONTROLS ORADJUSTMENTS OR PERFORMANCEOF PROCEDURES O...

Page 5 - DISC NOTES; will cause misoperation.

DISC NOTES 5 Disc formats supported by this player DVD 12 cm disc(Single-sided disc only) Video CD 12 cm disc CD 12 cm disc MP3 12 cm disc Handling and Cleaning • Dirt, dust, scratches and warping disc will cause misoperation. • Do not place stickers or make scratches on discs. • Do not warp discs.•...

Page 6 - INSTALLATION; Installation Opening

6 Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver. • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. • Use only the parts...

Page 7 - Removing the unit

7 6. Reconnect the wire harness and the antenna and be careful not to pinchany wires or cables. 7. Slide the unit into the sleeve until it locks into place. 8. To further secure the unit, use the supplied metal strap to secure the backof the unit in place. Use the suppliedhardware (Hex Nut (M5mm) an...

Page 8 - Fasten with the supplied truss screws

8 DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, followthese mounting instructions.Use the screw holes marked T (Toyota),N (Nissan) located on both sides of theunit to fasten the unit to the factory radiomounting brackets supplied with yourvehicle. To fasten the unit to the factory r...

Page 9 - THE PLAYER; FRONT VIEW

9 THE PLAYER FRONT VIEW Closed Position Open Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Page 10 - Slot

10 THE PLAYER 1. BAND 2. AS/PS 3. Disc Slot 4. LCD Display 5. LOC 6. MO/ST 7. / , / (Cursor Buttons) (Pick up) 8. ENT/ (Pick up) 9. (Eject) 10. (MENU) 11. S(Smart MODE) 12. /MUT 13. VOL+/- 14. MODE 15. DSP 16. (Open/Close) 17. (USB Interface) 18. AV IN 19. Reset Button 20. Remote Sensor 21. (BACK) /...

Page 11 - ELECTRICAL CONNECTION

11 ELECTRICAL CONNECTION (RED) (YELLOW) (GREY) (GREY) (GREY) (BLACK) (BLACK) (BLACK) (BROWN) (BROWN) (GREY) (GREY) (ORANGE) (GREEN) R OUT (RED) L OUT (WHITE) VIDEO OUT (YELLOW) L IN (WHITE) R IN (RED) VIDEO IN (YELLOW) PRE FROUT (RED)PRE FLOUT (WHITE)PRE RROUT (RED)PRE RLOUT (WHITE) COAXIAL (ORANGE)...

Page 12 - REMOTE CONTROL; LOCATION AND FUNCTION OF KEYS

13 REMOTE CONTROL LOCATION AND FUNCTION OF KEYS 36 1 21 3 20 18 11 8 31 30 24 32 27 10 25 2 7 34 33 29 22 19 16 17 12 14 13 4 15 9 26 35 23 28 5 6

Page 14 - Preparing the Remote Control; Inserting the Batteries; Loading a Disc; Turn the ignition on to the accessory; Ejecting a Disc

15 Preparing the Remote Control Inserting the Batteries 1. Open the battery compartment cover.2. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are orientedas indicated. 3. Close the cover Battery: One button cell lithium battery. Using the Remote Contr...

Page 15 - OPERATION; BASIC OPERATION; Turning the player on/off; And you can rotate the monitor left and right

OPERATION 16 BASIC OPERATION Turning the player on/off Shortly press button on the front panelor on the remote control to turn the playeron.When the unit is on, press and hold button on the front panel or shortly press button on the remote control will turn the unit off.(Note: Shortly press button o...

Page 18 - MUTE AND BRAKE FUNCTION)

OPERATION 19 A: Expert menu In expert menu, the following operationwill be allowed:- Use / to select Beep on or off. - Use / to turn the Clock display on or off.Note: With the expert menu on, whenselect clock on, the current time will bedisplayed on the up right of the screen,and you can see the tim...

Page 20 - FUNCTION; DSP; PBC Menu Playback of VCD/SVCD

21 ON-SCREEN DISPLAY FUNCTION Press the DSP button during playback to display the console information of thecurrent disc on the screen. For DVD:Once you press DISP button you willsee the information as the followingorder. 1) Item: TT Function: Display the current title number and total titlenumber. ...

Page 21 - Multi-audio Language Function

22 OPERATION The meaning of the menu is the samewith the DVD menu above. GOTO FUNCTION FOR DVD:Press GOTO button, the screen will display the following message: Use the number keys to input the desiredTitle, Chapter or Time, then press OK key to confirm. FOR VCD (WITH PBC OFF)/CD: You can input the ...

Page 22 - S Y S T E M S E T U P

23 OPERATION SYSTEM SETUP When you open the setup menu, you willsee the system setup page at first, seebelow: 1) TV SYSTEM: Change the TV mode among NTSC, PAL and AUTO. 2) SCREEN SAVER: Change the SCREEN SAVER on or off. 3) TV TYPE: Change the TV TYPE among 4:3PS, 4:3LB and 16:9. 4) PASSWORD: Change...

Page 23 - • When you open the AUDIO menu, you; A U D I O S E T U P

24 OPERATION You can change the OSD LANGUAGEamong: English, German, Spanish, French,Portuguese, Italian and Russian.You can change the AUDIO/ SUBTITLE/MENU language among: English, French,Spanish, German, Italian, Portuguese,Russian. And you can selectaudio/subtitle/menu language off. AUDIO SETUP • ...

Page 24 - RADIO OPERATION

25 OPERATION RADIO OPERATION Switching to radio mode Press MODE button on remote control to select radio mode or tap the Radio icon on the SOURCE menu on the screen.In radio mode, the following informationwill appear on the display. Selecting the frequency band Press BAND on remote control or tap BA...

Page 25 - AV OPERATION

26 OPERATION When search station in LOC mode, ifthere is no station available, it will switchto DIS mode and search stationautomatically. If there is no stationavailable too it will stop searching andreturn to LOC mode.When search station in DIS mode, ifthere is no station available, it will stopsea...

Page 27 - Pick up/ Hung up a Phone Call

28 OPERATION In this menu, tap the numeric icons to input the phone number then tap to confirm. Pick up/ Hung up a Phone Call In auto answer mode, when a callcoming the unit will answer the callautomatically.In manual answer mode, when a call coming, tap to pick up the phone. Tap to hung up the phon...

Page 28 - TROUBLE SHOOTING

If it appears that your DVD unit is faulty,first consult this checklist. It may be thatsomething simple has been overlooked. Under no circumstances should youtry to repair the player yourself, as thiswill invalidate the warranty. Onlyqualified service personnel can removethe cover or service this pl...

Page 29 - SPECIFICATIONS; RADIO; FM; DVD

SPECIFICATIONS 30 Power Supply Requirements : DC12 Volts, Negative Ground Maximum Output P ower : 4 x 80 Watts Current Drain : 15 Ampere (max.) (For Normal Power Version) RADIO FM Frequency Coverage 87.5 to 107.9 MHz Sensitivity (S/N = 30 dB) 4 μ V Image Rejection > 45 dB Stereo Separation > 2...